Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hello Dale, thanks for reaching out. We do have a few options for an exterior utility/loading light. Take a look at the following: - Gustafson 12V LED RV and Utility Light - 8" Long - Black #277-000493 - Opti-Brite LED Interior Strip Light -…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hey Gwen! The distance from the center of the mounting hole to the bottom of the Trailer Valet JX Trailer Jack #TV35FR when fully retracted is 13.44". If you’re measuring from the bottom of the pipe mount instead of the center of the hole, that…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Anthony! The outer diameter of the weld-on pipe coupling on the Trailer Valet JX Trailer Jack #TV35FR is 2.01". I went ahead and attached some dimensional drawings below for your reference. What kind of trailer do you have?
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
Illuminate Your Projects with Optronics Surface Mount Work Lights
Optronics surface mount work lights are perfect for enthusiasts looking to enhance visibility on trailers, trucks, or campers. These lights are easy to install and provide reliable illumination, making them ideal for various applications, from reverse lighting to utility lighting on vehicles.
These lights excel in various settings, from trailers to trucks. They offer sufficient brightness for reverse lighting without blinding others, and their design allows for easy installation on different surfaces, making them versatile for multiple uses.
Installation is straightforward. Use self-tapping screws for secure mounting, and ensure a small hole is drilled for wire placement. Soldered connections with heat shrink tubing can enhance durability, especially in outdoor settings.
These lights are generally reliable, providing consistent performance. However, some users have noted that while LEDs are expected to be durable, they may not always outlast traditional bulbs, so consider your specific needs.
Optronics lights are a great match for trailers and campers, offering a perfect fit and matching aesthetics with existing vehicle lights. They provide excellent illumination for docking and reversing, enhancing safety and convenience.
Absolutely! These lights are versatile and can be mounted on utility vehicles to illuminate work areas, storage spaces, or even steps and hallways, making them a practical choice for various utility applications.
Incandescent Light
LED Light
Work Lights Parts or Accessories
Filters
