Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hey Gwen! The distance from the center of the mounting hole to the bottom of the Trailer Valet JX Trailer Jack #TV35FR when fully retracted is 13.44". If you’re measuring from the bottom of the pipe mount instead of the center of the hole, that…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Anthony! The outer diameter of the weld-on pipe coupling on the Trailer Valet JX Trailer Jack #TV35FR is 2.01". I went ahead and attached some dimensional drawings below for your reference. What kind of trailer do you have?
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN
Illuminate Your Adventures with Optronics Oval Work Lights
Optronics oval work lights are perfect for enhancing visibility in various settings, from trailers to trucks. Their surface-mounted design makes installation a breeze, and their brightness is ideal for both utility and backup lighting. Whether you're on a boat ramp or a dark road, these lights ensure you see and are seen.
Optronics oval work lights are designed to withstand wet conditions, making them ideal for boat trailers and outdoor use. They maintain performance even after multiple exposures to water, ensuring reliable illumination when you need it most.
For a smooth installation, use stainless screws and soldered connections with heat shrink tubing. A small 1-inch hole is needed for wire placement, and self-tapping screws can help secure the lights to various surfaces.
These lights provide ample brightness for backup lighting without being overly intense. They illuminate the area effectively, making them perfect for trailers and trucks, ensuring you have enough light to see without blinding others.
Absolutely! These lights are versatile, suitable for use on trailers, trucks, and even side-by-sides. Their design allows them to be used as utility lights, backup lights, or even for illuminating specific areas like tire zones.
The oval shape of these work lights offers a sleek design that fits well on various vehicles. It provides a wide beam pattern, enhancing visibility over a broader area, which is particularly useful for backup and utility lighting.