Replacement Fender Light With Part Number 1A-V-1260AR
Updated 01/16/2026 | Published 01/11/2026
Products Featured in This Question
Question:
I have a side fender marker light with a p/n 1A-V-1260AR. Do you carry a replacement for this light? Thanks
asked by: Bill H
Expert Reply:
Hey, Bill!
I did some searching about the light that you currently have. Part number 1A-V-1260AR is a Kaper II light, unfortunately we don't carry that brand of light. The Peterson light part # 2637R would be a comparable light. We don't have a way to confirm if it will fit in your existing mounting bracket so you may need to get a new one. Which will be part # B154-11. The size of the Peterson mounting bracket is very similar in size and the mounting holes are 3" apart. I wasn't able to find the distance of the mounting holes on the Kaper II bracket.
If you need a light that is half red and half amber then you would want to pick up Optronics Thinline LED light part # MCL65ARB and get bracket part # A65B to go along with it.
Below I attached 3 pictures showing the dimensions of your mounting bracket, the Peterson bracket, and the Optronics bracket to help compare what one will be the best fit.
(click to enlarge)
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Optronics Incandescent Trailer Fender Light - Submersible - 2 Bulbs - Red/Amber Lens
- Trailer Lights
- Clearance Lights
- Marker
- Rectangle
- Surface Mount
- Submersible Lights
- Incandescent Light
- 3-15/16L x 1-1/4W Inch
- Amber
- Red
- Optronics
more information >
Continue Researching
- Q&A: Replacement AC for a GE AC Unit Model ARC13AACBL2
- Q&A: Mounting Bracket Options for Optronics Sealed, Thin Line Clearance Side Marker Light # MC65AB
- Q&A: Replacement Bearings and Grease Seal for TDE 46845
- Q&A: Replacement Hub/Rotor for UFP 41030
- Article: Trailer Lighting Requirements
- Q&A: Switch Wiring Diagram for Solera Power Awning Switch Kit # LC285500
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Wheel Stud For Trailer Hub HD42866
- Q&A: Replacement Trailer Tail Light for a DOT SAE A216S2T2L 18
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Performance Chips and Modules
- Article: Can You Flat Tow a 2025 Cadillac Escalade?
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
Pete S.
1/13/2026
Hi Bill, yes these are a direct replacement for your bulbs. I have a 2010 Haulmark trailer with the same incandescent bulbs you have. I opted for the Optronics LED lights wince they wiill last longer and are brighter. They easily plugged into the existing mounting bracket and fit securely. I hope this helps.