Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Hey Raymond, since the 5k rated etrailer jack part #e55ZV is rated higher than the 3.5k option you also mentioned it will work a little bit quicker since it won't be working quite as hard. With that said it's not a fast jack by any means. It…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
Hey Jeff, I don't see why you could use the Roadmaster diode part #RM-790 the way you mentioned. Sounds like you are looking for a way to have aux lights come on with either a remote switch from your cab or to come on anytime the high beams are…
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
To replace the 10K Hybrid safety cables that came with your Roadmaster Nighthawk tow bar you'll need the kit #RM-674 which comes with 2 of these cables. These are the same design as your current setup and they come with a limited lifetime…
Hey Randy, I wish we had the replacement flush ball you are looking for but at this time Dometic does not offer that as a replacement part. Only solution would be a new 310 like the part #DOM57FR.
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Hey Raymond, since the 5k rated etrailer jack part #e55ZV is rated higher than the 3.5k option you also mentioned it will work a little bit quicker since it won't be working quite as hard. With that said it's not a fast jack by any means. It…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
Hey Jeff, I don't see why you could use the Roadmaster diode part #RM-790 the way you mentioned. Sounds like you are looking for a way to have aux lights come on with either a remote switch from your cab or to come on anytime the high beams are…
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
To replace the 10K Hybrid safety cables that came with your Roadmaster Nighthawk tow bar you'll need the kit #RM-674 which comes with 2 of these cables. These are the same design as your current setup and they come with a limited lifetime…
Hey Randy, I wish we had the replacement flush ball you are looking for but at this time Dometic does not offer that as a replacement part. Only solution would be a new 310 like the part #DOM57FR.
Illuminate Your Workspace with Reliable Work Lights
Work lights are essential for any enthusiast needing reliable illumination in various settings, from trailers to service bodies. Consider the light's brightness, durability, and mounting options. Whether you're upgrading from incandescent to LED or adding auxiliary lights, there's a perfect work light for every need.
LED work lights offer brighter illumination, energy efficiency, and longer lifespan compared to incandescent lights. They're perfect for tasks requiring clear visibility, like backing up trailers or lighting up workspaces. Plus, they often come with improved mounts and are easier to install.
Work lights are designed to withstand tough conditions. Many feature durable housings and mounts that can handle vibrations and impacts, making them ideal for use on trailers, trucks, and off-road vehicles. However, it's important to ensure proper installation to prevent damage.
Absolutely! Work lights are versatile and can be mounted on vehicles like trucks, trailers, and boats, or used in stationary setups like workshops and garages. Their adaptability makes them a great choice for various lighting needs, providing ample illumination wherever required.
Consider the light's brightness, beam pattern, and mounting options. Ensure it fits your vehicle's setup and provides adequate illumination for your needs. Look for features like built-in switches for convenience and check reviews for insights on performance and durability.
When installing work lights, ensure a secure mount to prevent movement during use. Avoid pressure washing the lights to maintain their integrity. For vehicle installations, check compatibility with existing connectors and consider professional installation for optimal results.
Filters
