Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hello Dale, thanks for reaching out. We do have a few options for an exterior utility/loading light. Take a look at the following: - Gustafson 12V LED RV and Utility Light - 8" Long - Black #277-000493 - Opti-Brite LED Interior Strip Light -…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hey Gwen! The distance from the center of the mounting hole to the bottom of the Trailer Valet JX Trailer Jack #TV35FR when fully retracted is 13.44". If you’re measuring from the bottom of the pipe mount instead of the center of the hole, that…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Anthony! The outer diameter of the weld-on pipe coupling on the Trailer Valet JX Trailer Jack #TV35FR is 2.01". I went ahead and attached some dimensional drawings below for your reference. What kind of trailer do you have?
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
Another great purchase. Low prices, fast shipping and great customer service are always provided.
Ralph
Littleton, CO
Illuminate Your Projects with Optronics Incandescent Work Lights
Optronics incandescent work lights are a reliable choice for those who need consistent lighting for various tasks. Known for their easy installation and competitive pricing, these lights are perfect for replacing older models or upgrading your setup. Whether you're working on a trailer or a fifth wheel, these lights provide the brightness and durability you need.
Optronics incandescent work lights are praised for their ease of installation and reliable performance. They offer a bright, consistent light that's ideal for various applications, from trailers to fifth wheels. Their competitive pricing and availability make them a popular choice for those looking to replace or upgrade their lighting.
These lights are designed to withstand various conditions, making them suitable for outdoor use. They provide a steady beam that's perfect for illuminating work areas, even in challenging environments. While some adjustments may be needed for specific setups, they generally fit well and perform reliably.
While most find these lights to be of good quality, some have noted issues like cracked lenses upon delivery. However, these instances are rare, and the overall feedback highlights their durability and effectiveness. It's always a good idea to check the product upon arrival to ensure everything is intact.
Yes, Optronics lights are often used to replace older or burnt-out models. They are designed to fit a variety of setups, though some minor adjustments may be necessary. Their bright, clear light makes them an excellent upgrade for enhancing visibility and safety in your work area.
When installing these lights, ensure you have the right tools and check the fit against your current setup. Some users have had to make slight adjustments due to metric sizing differences. Once installed, they provide excellent illumination and are a great addition to any work environment.
Filters
