Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.
Hey Rick! The B&W pin box adapter is a great choice to upgrade your trailer setup to tow with your diesel 2026 Chevy Silverado 2500 HD with 6-1/2' bed! I gave your specs to the manufacturer and confirmed that you have a Lippert Rhino pin box.…
Hi Scott, That’s a smart question to ask before you pull anything apart. Good news, the Vision S+ side cameras in the kit part #FR64AD are designed to use the same style marker light base and wiring as the original Vision S system. If your fifth…
Hey Clark! We didn't have the version with the 5" screen so I went ahead and added it to our site for you. For the standard system we have the Furrion Vision S+ Wireless RV Backup System w/ 1 Camera - 5" Screen #FR39DF. If you want the…
*Updated From Below Hi Michael; I'm sure you're right, it is probably prepped for the Furrion. Since Furrion is phasing out the old Vision S, and parts won't be available soon, you want to get the new Furrion Vision S+ Wireless RV Backup…
Hey Mike, your 2025 Chevy Silverado 2500HD will have the power issue with the Furrion Vision S + #FR57AD that you have so you would need a solution like the part #VGR64VR that you referenced. Or if you don't want to mess with any wiring you could…
Hey, Joe. That's a great question. Backup cameras and rearview, observation, cameras are essentially the same, the difference comes down to how they’re wired. With a system like the Furrion Vision S+ Wireless RV Backup System #FR57AD, it’s…
Hi Mark, You shouldn't need to use the Furrion 7-Way Vehicle Power Adapter part #FR87PR because your 2018 Ram 2500 is from the fourth generation of the Ram 2500 before they did the huge overhaul that changed the circuits and resulted in the newer…
Hey Doug, congratulations on the new truck and trailer! That is a nice setup for sure. Unfortunately, the backup cameras aren't going to integrate with your dash cam system. Since you're already prepped for Furrion, and it is the best on the…
Hi there Ross. Thanks for all the details. The microSD card is not required for the camera to work; it is only used for recording and firmware updates. Since the monitor of the #FR39DF powers on but says “No Signal,” I would start by checking the…
Hey Tandra, we haven't tested the Furrion Vision S + systems like the part #FR57AD on a Bulletproof mount system at this time but I can tell you that the diameter of the ball is 5/8 inch. Is that the correct size for that system?
Hey Luke! What kind of trailer do you have? Yes, the Furrion Vision S+ Wireless RV Backup System #FR57AD will fit where the old Vision S was. They use the same mounting bracket and wiring so it should be an easy swap. The only thing that isn't…
Built-In DVR
Filters
