Hi Guy, That's a great question, and thank you for providing so much detail. It really helps narrow things down. Based on your description, it sounds like you may have cruiser style or step through bikes with front baskets, and that combination…
Hey Patti, thanks for reaching out. The Swagman E-Spec Pro Bike Rack #S45SR is a solid option for this. It can hold two bikes weighing up to 70 lbs apiece on a 5th wheel, and it does not have a minimum tongue weight capacity limitation like the…
Hey Charles, the Swagman E-Spec part #S45SR is rated for use at the rear of a travel trailer so it will work great for you. It is odd that it's not closer connected to the other RV rated bike racks but that's our fault and I'll see if I…
THey Brian, the Coleman Mach Signature Mach 15 part #CM32RR is a really solid AC unit. As far as how it compares to the Furrion Chill Cube #FR69TD it only has the advantage of working more consistently with furnace controls. Aside from that the Chill…
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Tom, this is a really great question but we had an affiliate who tried all of the newer cushioned fifth wheel to gooseneck adapters and he said the MORryde Goosetec like the part #MR47MV provided the smoothest ride quality. This would be what I…
Hello Bobby, I have a great solution for you to be able to transport your two 55 lb bikes on the back of your travel trailer with a spare tire. You will want the Lets Go Aero V-Lectric VFR Bike Rack for 2 Electric Bikes #LGA25VR. This rack is rated…
No, it will not Mayra. The Universal Wheel Holder Kit item #HR89FR is designed to replace the wheel holders on the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes item #HLY84FR. This is a custom fit replacement part so it's not…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hi Tanya, Only certain bike racks are recommended for use behind a fifth wheel due to the extra movement and bounce the rack has to withstand behind a fifth wheel compared to when it's on the back of a vehicle. Bike racks are tested by the…
Hey Sherri! The Lets Go Aero Jack-It PLUS Bike Rack for 2 Bikes #LGA47ZR does indeed mount using the same bolts and bolt holes as your trailer jack. Why do you think it won't work? Did you measure and you don't have enough room? It requires a…
Hey there Lisa, hope you're having a great day. So you actually brought up a really good question. The etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers #e38FV uses a gate that comes down and makes contact with the shank of the bike…
RV and Camper Bike Racks for RV Hitch Rack mounting
Set up your bikes on an RV Hitch Rack that suits RV and camper travel. Look for RV-approved options with reinforced shanks for travel trailers, plus designs that secure by the frame for fenders or use tire straps that work with step-through frames. Consider tilt and fold features for access and bumper clearance, and note when a step-through adapter bar is needed.
Use a rack that clamps to the frame or seat post, or add a frame adapter bar if hooks don't reach low enough. Check the hook travel on low step-through frames and adjust the center bar or bracket height as needed. If using wheel straps, ensure they route under the fender. Test-fit and tighten everything before hitting the road.
Assembly is generally straightforward but can take time the first go. Plan on adjusting trays and hooks so each bike sits best in relation to the other, then you're set for future trips. For low step-through frames, lower the bracket or center bar to get a secure hold. Do a full test load and short drive to confirm fit.
Look for an anti-rattle design, such as a threaded hitch bolt, to help reduce movement. Verify the hitch bolt and lock feel solid before travel. Load order matters—placing the heavier bike closer to the vehicle is recommended when the rack allows it. Some jostle can be normal; secure all clamps and straps firmly.
Yes, choose an RV-approved hitch rack that secures by the frame or uses tire straps that fit under fenders. Confirm the per-bike weight rating matches your e-bikes. If the rack uses hooks, make sure they clamp the frame rather than the fender. Do a test load to verify strap or hook placement with your specific fenders.
2 Bikes
4 Bikes
5 Bikes
RV and Camper Bike Racks Parts or Accessories
Filters
