The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, #LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side, #LC26VR, will of course be the right side as facing…
Hey Jack congrats on the new Jeep! To flat tow a 2021 Jeep Wrangler Rubicon behind your 2012 Thor Hurricane 31J motorhome, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect…
Hey John! Since you have the same number of teeth the Replacement 24 Tooth Pinion Spur Gear for Power Gear RV Slide Outs #LC86EX will likely work as a replacement. I would measure the outer diameter as well. If it matches the 1.417" measurement…
Hey Jared, the pass through amp rating of the Rich Solar NOVA 3K12 3000W 12V Pure Sine Wave Inverter with Built-in Transfer Switch for RVs #RS79VR is 30 amps. What AC units do you have? This should be more than enough for that.
Hey, Skip! Happy to help get your new Jeep set up for flat towing. There is going to be a list of parts, so I'll go ahead and list them all below for ya. Blue Ox Base Plate: Part #BX1139 Blue Ox Avail Non-Binding Tow Bar: Part #BX7420 Demco…
Hello Andrew, good question. Basically the only difference between the composite kits and the standard (non-composite) kits is the application they are used for. Composite are used in motorhomes, the other are used on towable campers. It has to do…
Hey Donna, you would have to replace the entire setup as there was a refrigerant law change in January of 2025 that forced the complete systems to have to be redesigned and because of that nothing is currently backwards compatible. So what I would…
Unfortunately, I cannot tell you what wiper seal you would need for your 2004 Keystone Outback. This is not something that is known just from the RV information. It depends on your particular slide-out. The best way to determine what wiper seal you…
You've got both a wiper seal and a bulb seal here with the wiper seals having a track for the bulb seal to slide onto. The Rubber Wiper Seal with Track for RV Slide Out #SR87FR you were already looking at is most likely the closest option to what…
Hey Kyle, yes the Flair-It High Pressure Hose #FL37FR does fit on the 1/2 barb fitting of the Flair-It PEXLock Female Elbow Fitting #FL44ZR that you also referenced.
In order to determine if the correct Lippert Replacement Hydraulic Cylinder like part #LC339031 you would need to measure the distance between your hydraulic fitting ports and note the color of the cylinder. The above Lippert Replacement Hydraulic…
Hey Henry! I would be happy to help you get your 2026 Jeep Wrangler ready for flat towing. You will need the tow bar, base plate, safety cables, wiring, and a supplemental brake system. I recommend the following: -Blue Ox Base Plate Kit - Removable…
The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, #LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side, #LC26VR, will of course be the right side as facing…
Hey Jack congrats on the new Jeep! To flat tow a 2021 Jeep Wrangler Rubicon behind your 2012 Thor Hurricane 31J motorhome, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect…
Hey John! Since you have the same number of teeth the Replacement 24 Tooth Pinion Spur Gear for Power Gear RV Slide Outs #LC86EX will likely work as a replacement. I would measure the outer diameter as well. If it matches the 1.417" measurement…
Hey Jared, the pass through amp rating of the Rich Solar NOVA 3K12 3000W 12V Pure Sine Wave Inverter with Built-in Transfer Switch for RVs #RS79VR is 30 amps. What AC units do you have? This should be more than enough for that.
Hey, Skip! Happy to help get your new Jeep set up for flat towing. There is going to be a list of parts, so I'll go ahead and list them all below for ya. Blue Ox Base Plate: Part #BX1139 Blue Ox Avail Non-Binding Tow Bar: Part #BX7420 Demco…
Hello Andrew, good question. Basically the only difference between the composite kits and the standard (non-composite) kits is the application they are used for. Composite are used in motorhomes, the other are used on towable campers. It has to do…
Hey Donna, you would have to replace the entire setup as there was a refrigerant law change in January of 2025 that forced the complete systems to have to be redesigned and because of that nothing is currently backwards compatible. So what I would…
Unfortunately, I cannot tell you what wiper seal you would need for your 2004 Keystone Outback. This is not something that is known just from the RV information. It depends on your particular slide-out. The best way to determine what wiper seal you…
You've got both a wiper seal and a bulb seal here with the wiper seals having a track for the bulb seal to slide onto. The Rubber Wiper Seal with Track for RV Slide Out #SR87FR you were already looking at is most likely the closest option to what…
Hey Kyle, yes the Flair-It High Pressure Hose #FL37FR does fit on the 1/2 barb fitting of the Flair-It PEXLock Female Elbow Fitting #FL44ZR that you also referenced.
In order to determine if the correct Lippert Replacement Hydraulic Cylinder like part #LC339031 you would need to measure the distance between your hydraulic fitting ports and note the color of the cylinder. The above Lippert Replacement Hydraulic…
Hey Henry! I would be happy to help you get your 2026 Jeep Wrangler ready for flat towing. You will need the tow bar, base plate, safety cables, wiring, and a supplemental brake system. I recommend the following: -Blue Ox Base Plate Kit - Removable…
RV Slide Out Parts for Lippert Through-Frame Slide-Out Systems
Dial in repairs on Lippert Through-Frame Slide-Out Systems with parts that address common wear points like motors, gear packs, and rails. Measure the arm size to match a gear pack, and remember the motor and gearbox come as a set—match RPM (like 9,000 RPM) to your original for smooth operation. If a slide misbehaves, check the ground connection first, and on older hydraulic setups avoid mixing actuators with different speeds.
It can work, but mixing old and new actuators may cause different travel speeds on older rigs. Consider replacing actuators in pairs or confirm matched performance. To identify what you need, measure stroke as the rod's travel and overall length with the cylinder retracted.
Match the specs on your motor label, like 12V and RPM. Some setups use Thomson/Tuson styles where the motor and gearbox are purchased together. When installing, don't expect the mounting bolt to thread into the motor—on some designs the bolt passes through the motor and threads into the actuator tube.
Measure the slide arm to size the replacement gear pack correctly. Inspect the rail teeth too—if they look worn, plan a rail repair along with the pack. Use a floor jack with a wood block to lift the slide box slightly and take tension off for easier swap. Upgraded steel gears and rollers can help handle torque on heavy slides.
Start by checking the ground wire for corrosion; clean the contact, replace the end, and use a new screw if needed. Worn gearpack teeth or a chewed rail can cause noise—replace the gearpack and consider a rail repair kit if the rack teeth look bad. After replacement, slides can run smoother and quieter.