Review of Lippert Components - RV Exterior - LC281331

content loading



Customers compare LC281331 to these similar products


Products Featured in this Video



Lippert Components - RV Exterior - LC281331 Review


Today, we're going to take a look at the Lippert Components 2X2 Slide-Out Gear Pack without roll pins assembly. Now, this is going to get you rolling your slide-out easily and quickly again. Maybe you had a broken tooth on one of your gears and you need a new one. So, again, this is going to work for your 2X2 tube. Basically, that just means that it's going to be a two-inch opening there that this is going to fit into. Our pin assembly is going to go through that.

We're have our rollers and gear to easily roll out our slider. And then, our two attachments on the outside to keep everything in place.Now, again, this does not come with the roll pins. That would be the two things that go in the holes that are on our main pin. So, you will have to pick that up separately, or reuse them from your old gear pack. That just keeps our center pin from sliding one way or the other.

Our gear itself is going to have 15 teeth. So, it's going to be a 15-tooth gear. We'll have our two rollers to get everything rolling as it should.Take everything apart. It's going to look like that. So, we'll have our two attachment points for the outside.

You'll want that fatter end to be towards the middle to hold in place. Then we'll have our two roller with the sort of octagon spacer, or hexagon space inside to make sure that turns with our pin. Our 15-tooth gear itself and then that center pin.So, might not be a bad idea if you had one broken tooth on one gear to go ahead and replace the one on the other side, since you've already got everything taken apart. It's never a bad idea to just replace everything all at once, so that it's all going to wear the same. But this will get you back to using your slide-out with no problem.

It should be a dependable, durable gear pack to get you back enjoying your vacation or enjoying life as you should. This product is also made in the USA and it comes with one-year limited warranty from Lippert Components.That's going to do it for our look at the Lippert Components 2X2 Slide-Out Gear Pack without roll pins assembly.


Questions and Comments about this Video

add comment

Info for this part was:

Installed by:
Kathleen M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.