Replacement Motor for Slide Out Motor with Part # 8532-18HT  

Hey John, thanks for reaching out! Aside from the Motor #LC132682 operating slower than the Motor #LC295380, there shouldn't be any problems or possible damage because these have the same 18:1 gear ratio and power settings.

If your vinyl trim track on your travel trailer is 1 inch wide from outside edge to outside edge you'd need 3/4 inch wide vinyl trim as the trim fits into the track. So for 100 feet of black 3/4 inch wide trim you'd want the…

Just the motor for what you have is not available. But we have the motor with the actuator as the Lippert Components Venture Actuator and High Speed Slide-Out Motor Item #LC168956. This is the same 9,500 RPM motor you have.

We have had this question before and according to Lippert the replacement for your actuator and slide out motor 131903 is the Lippert Venture Actuator and High Speed Slide-Out Motor item #LC168956 or the Replacement 18:1 High Speed Motor Assembly…

There is a gear in the housing of the Replacement 18:1 Venture Motor and Driveshaft with Right Angle Gear Box #LC117292 right by where you would bore through so you run the risk of it interfering with the operation of the motor. You'd also break…

The Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out part #LC295380 is only offered by Lippert as a complete unit with the motor and gear. The motor is not available separately from Lippert.

Your best bet would be to attach something to the tail light housing on the driver side. It looks like perhaps the zip ties in the second picture could have been used to hold a license plate at some point? You might be able to use the existing holes,…

Yes, if you just need the motor from the Lippert Replacement RV Slide-Out Venture Actuator with 18:1 Motor #LC119128 then you'll need to get the following: - Replacement 18:1 High Speed Motor Assembly #LC295380

Hey Jeff, appreciate all the details you provided that was super helpful and we do have the MORryde cushioned pin box that is designed to replace a Lippert Rhino pin box. For the 17,695 lb GVWR you mentioned on the 2024 Brinkley Model Z 3610, what…

Generally I would say that there isn't a reason to go to a higher capacity than needed, but as the price difference between the 16k Reese Goose Box 20k Reese Goose Box #RP85FR is so little, there isn't really a reason to not go for the more…

Parts like the Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out #LC295380 will have a 1 year limited warranty against manufacturing defects.

I spoke with my contact at Lippert and the replacement motor you'll need for your Thompson Saginaw Part No. 7831293 is the Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out #LC295380.