Good question, Dave. The easiest way is to match the RVpaws kit to your jack leg or leveling system. For example, there are specific kits for the brands and lineups out there: Standard 2" round jack leg = #RV57FR Standard 2" square jack leg…
Hey Arkadius, welcome back! Yes, the ducted version of the Chill Cube comes with a remote. However, you're going to need the complete system for a replacement. You can choose from the following based on color: -Furrion Chill Cube RV Air…
Good question, Mark. The RVpaws V2 pads are definitely stronger than most OEM setups. They are built from 1/4" plate steel with 6 gussets, so they’re a nice upgrade over thinner factory-style feet that have about 1/8" thick plate. The right…
Hey Dennis! If your fifth wheel uses standard 2" square leveling jack legs, the RVpaws articulating jack pads #RV24FR is the correct kit. If the legs are standard 2" round instead, you’d use #RV57FR. If you actually have Lippert Titan or…
Hey David, it sounds like you know what you're doing but I've also gone ahead and found the wiring diagram for the Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR for you to check out so you can use it as a cross…
Hey Jerry, does the LED still light up on the front of the Mighty Cord SurgeMinder Surge Protector and Circuit Tester #SU39SR? If it was actually overloaded it would have damaged the internals of it and it wouldn't work as a surge protector any…
Hi Bill! You will need to completely replace the system since you have old Dometic R410a units on your Monaco. Everything switched to R32 refrigerant following new EPA regulations in 2025, and the new systems are not backwards compatible. For a…
Hi Jeff! To be perfectly honest, there is no difference between them. The Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness #RED72CR comes to us already put together to fit your 2017 Toyota Tacoma, whereas the Redarc Tow-Pro Liberty Brake…
Hey Scott. The Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump like item #FR97TQ in black or item #FR67TQ in white are only available in 18K btu capacities. The Chill Cube uses variable-speed technology, which allows it to reduce…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…
Hey Ken, welcome back! The Chill Cube #FR24TQ is just the rooftop unit. The #FR67TQ is the rooftop unit with the air distribution box (ADB) and the remote. This is everything you need for a complete installation. The #FR59TQ is the AC unit with the…
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Eric
Cedar Springs, MI
RV Interior Lights with Bright White Puck Light
Count on a bright white puck light when you want crisp, focused illumination inside your RV. Pick the switch style that fits your setup—some have a built-in button, others wire to a wall switch—and choose a mounting method that matches your existing cutouts. If you prefer adjustable output, select options that work with a 12 volt LED-compatible dimmer for softer light when needed.
Yes, if the dimmer is a 12 volt LED-compatible dimmer. Verify the dimmer is designed for LEDs to help prevent flicker. If your setup uses a built-in switch on the puck, confirm the light's wiring allows a dimmer in the circuit.
Choose between a push-button puck light or one that wires to a wall switch. Some puck lights use a rubber push and others a hard button—if rubber buttons have stuck for you, look for a solid switch. If a light is not a push light, plan to wire it to a switch. Before ordering, match the switch style to what you want to press at the light or control at the wall.
Yes, Bright White puck lights provide a nice bright light suited for tasks and table areas. If you prefer a softer tone, warm white options around 3,500 kelvin are available. Try one location first to confirm the look before updating multiple lights.
Confirm whether you need surface mount or a spring-clip mount for a headliner. Spring-clip puck lights are easy to mount and have strong tension springs. For surface-mount styles, check your screw pattern. Do a quick power test before final mounting to confirm it lights bright as expected.
Filters
