bing tracking image

RV Interior Lights - Command Electronics

Filter by Type of Light

Filters
1

























What our customers are saying:
Very broad selection and outstanding service.
Mike
Eagan, MN


Command Electronics RV Interior Lights for clean upgrades

Swap in Command Electronics RV interior lights to refresh your cabin lighting. Measure your puck or fixture diameter and mounting pattern so the replacement matches, and note that some use standard white and black wires. Warm white 3,500 kelvin options are available, and you can pick push-button or touch-switch styles to suit how you plan to control them.
Yes, you can add a separate switch to cut power, but the touch switch still needs to be physically touched to turn the light back on. Plan switch placement so it's easy to reach, and test that the light remains in the on state before using the external switch.
Installation is straightforward with standard white and black wires for RV connection. Check the existing ceiling cutout and screw locations; you may need a plate if old holes are larger than the new base. Secure the fixture and test for stable, non-flickering light.
Match the light by measuring the outside diameter and checking the screw pattern (some use three holes, others four). Confirm the switch style you want, like a push button or touch switch. If only the lens is damaged, plan on replacing the whole light since lens covers may not be sold separately.
A Command Electronics warm white LED puck light was confirmed at 3,500 kelvin. Verify your light's size and whether it's surface mount to ensure a proper fit. If you prefer a lower kelvin look, compare the stated kelvin rating before ordering.