bing tracking image

RV Interior Lights - LED Light, Command Electronics

Filters
2
























What our customers are saying:
I hope to install it in the next week or so. I have used your products before and I was very please then... as I am now. BIG THANKS, HENRY
Henry
Indian Land, SC


RV Interior Lights with LED Light by Command Electronics

Command Electronics makes swapping or upgrading interior lighting straightforward and clean. These led light fixtures show up as exact-fit replacements in many rigs and install easily with standard white and black RV wiring. Match your cutout diameter and screw pattern, and pick the warm tone you like—options include warm white at 3,500 kelvin—to get bright, flicker-free light where you need it.
You can add a separate on/off switch to cut power, but a touch-reading light will need to be touched to come back on. Wire the new switch in line with the 12V feed to turn it off from a different spot. If you want full on/off at the remote switch, choose a non-touch style instead.
They're typically easy to install and use standard white and black wires for RV connection. Pull the lens to access the mounting holes, then tie into 12V power. If you're swapping styles, check the existing hole size; you may need a trim plate if the new base is smaller. Verify switch type so it matches what you want at that location.
Start by measuring the light's overall diameter and the cutout behind it. Count the mounting screws and match the pattern, and confirm whether it's surface mount or recessed. If your current puck has a button on the face, stick with a version that also has a button. If you can't find a standalone lens, plan to replace the entire light.
Warm white from Command Electronics is 3,500 kelvin. If you're replacing a light in a bathroom or bedroom and want a softer look, confirm the kelvin rating matches what you prefer. Check the product description for kelvin so you don't end up with a cooler white than expected.