Command Electronics RV interior lights add a clean black look that fits right into your setup. Installation is straightforward with standard white and black wires for RV connection and solid construction. Depending on the model, you can get independent base/reading control or lights that are dimmable with a 12v dimmer switch, and LED strips are not replaceable.
Yes, some Command Electronics black RV interior lights are dimmable when paired with a 12v dimmer switch. Check that your specific light supports dimming. Look for a built-in on/off switch and a 2-wire design with white for ground and black for power. Verify dimmer compatibility before wiring.
No, the LED strip in these Command Electronics lights is not replaceable. To swap the fixture, pull the lens up and away to access the mounting holes, then remove the light from the ceiling. If you're covering old ceiling holes, add a plate to keep the new fixture from collapsing into a gap.
Yes, certain Command Electronics reading lights let you switch the base light and the reading light independently. Check for separate switches on the fixture. Confirm wiring access and that your power and ground (black and white) are available for both functions.
The USB port stays powered even when the light is off, as long as the RV battery switch is on. Expect very little draw (if any) when nothing is plugged in. If you want it off, place it on a switched circuit. Verify your model includes a USB port before planning the circuit.
Installation is typically straightforward with standard black (power) and white (ground) wires. Some reading lights use 14 gauge wire; confirm yours before connecting. If replacing larger OEM fixtures, plan for a trim plate to cover existing holes. Test function before final mounting to ensure proper polarity.
Dome Light
Reading Light
RV Interior Lights Parts or Accessories
Filters
