bing tracking image

RV Door Parts - Screen Door

Filter by Type of Part

Filters
1
Filters: Screen Door

























What our customers are saying:
very easy to shop
Mike
Richmond, CA


RV Door Parts for Screen Door Repairs

From latches and handles to sliders, RV door parts keep your screen door working the way you like. Check dimensions and orientation before you buy—choices include 12 x 12 or 9 3/4 x 12 panels, trim-to-fit panels, left or right hand latches, and universal latches that include a striker. Plan install time; some parts line up with existing holes while others may need drilling or different fasteners, and setting bar length first makes drilling easier.
Yes—match your hardware to the screen door material. If the original was riveted aluminum, machine screws with nuts can work better than wood screws. For latch installs, placing the screen door horizontal can simplify aligning parts. If adding scratch protection, shorter screws may be needed to avoid protruding through thin panels.
Measure your screen door opening first. Common sizes include 12 x 12 and 9 3/4 tall x 12 wide, and some sliders can be trimmed if needed. If your main door handle sits proud, check that the slider's bubble profile will clear it. Some sliders use a push-down knob—verify the height you need before ordering. Older doors may have a more rounded bubble, so compare shapes to your existing panel.
Confirm your screen door can close with the added parts installed. An interior frame overhang or a main door handle can interfere. Set bar length first, then drill the four holes to match; this helps with alignment. If choosing a closer, measure your inside-to-inside frame width carefully—if it's about 28, you may need the longer option. If you want a sturdier feel, compare construction details.
Yes, some screen door latches are designed as universal replacements and include a striker if yours doesn't line up. Confirm your door's handing first. Hole locations can differ, so be ready to elongate holes if needed. During install, aligning the spring, push rod, and button can be tricky—two sets of hands help, and working with the door laid flat can make it easier.