Freshen up your entry with black hardware that blends in and holds up. Measure your cutout and door thickness to match the style you have, since some locks use unique openings and many replacements install in minutes when sizing lines up. Choose the part you need—locks, hinges, struts, seals, or handles—and you can even keep things simple with keyed-alike options where available.
No, one controlled-motion hinge can do the job. Replacing a single hinge can help the door resist swinging open or closed. Keep the other hinges in place unless they're worn or damaged. Confirm the hinge style matches your door before swapping parts.
Match the force and hardware to your door. A 10psi strut may be more suitable for a standard weight entry door. Some installs require swapping the threaded ends to clear the door sweep—check clearance and handle retaining clips carefully since they aren't interchangeable. Instructions may not be included, so plan your steps ahead.
Match the cutout and thickness first. This style fits a 7-7/16" tall x 3-3/4" wide cutout, and one option lists a minimum door thickness of 1-1/2". Remove 4 screws and measure your opening before ordering. If your door uses a right-hand latch, verify the hand. A standard plunger-and-strike latch may not fit the same cutout used by a European style lock.
Not currently. This style uses a unique 7-7/16" tall x 3-3/4" wide cutout, so typical keyless handles for standard cutouts won't drop in. If you're set on keyless, confirm the exact cutout and door thickness first. Some options may exist overseas for this style, but they would still need that specific cutout.
Confirm door thickness and hardware. Some slam latches fit a 1-1/4" thick door; if you don't have a mounting plate you may need to add one. Direct replacements can drop in, but if a cam wheel is the only failed part you might reuse just the cam. Verify latch style from your old compartment door before ordering.
RV Door Parts Parts or Accessories
Filters
