Filter by Accessory Type

$5.32 - $124.04

$13.03 - $148.27

$40.20 - $81.94

$21.22 - $109.61

$15.50 - $135.14
Videos
for Propane Fittings
Help Articles
for Propane Fittings
Expert Answers
for Propane Fittings
The difference between the prices of the JR Products Automatic Changeover LP Gas Regulators and Camco Automatic Changeover 2-Stage Propane Regulators are in the BTU per hour, which as you correctly noted, is important information. The JR Products…
view full answer...Hey Mark, To plug the unused ports on your JR Products RV LP Gas Manifold #JR65CR you'll just need the JR Products RV LP Gas Manifold Plug #JR25CR. We also offer a couple of adapters to make your connection to the ports easier: 1/2" x…
view full answer...Hi Ron, Your 2013 Montana 3150RL has two propane tanks so you'll want a dual stage pressure regulator with automatic changeover. The automatic changeover will switch from the main tank to the reserve tank if the main tank were to run out of…
view full answer...To add a 100 lb tank to your two 30 lb tanks, I recommend the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports #103615. This will allow you to connect the red fitting to one of your tanks and the…
view full answer...Hello Royer, Thanks for writing in, we’re glad you found us! The correct wiring harness for your 2020 Toyota Highlander XLE without the factory tow package is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C76CR. Even…
view full answer...I attached a picture that shows what the typical dual tank setup looks like with the accessories needed labeled. First thing you need is pig tails to go from the tanks to the regulator like the part #100473-12. Then for a dual tank regulator with…
view full answer...Yes, there is a way to measure the fitting size to ensure it is the correct size to use with the Propane Adapter Fitting #37207-30225. The best way to do this would be to use a digital caliper like the #PTW80157. A 1/4" NPT fitting should…
view full answer...The Automatic Changeover RV LP Gas Regulator part #37207-30395 will be a great replacement for the Fairview GR-9984. The fittings are all the same so it should be an easy bolt-on swap. They are both auto-changeover regulators with an 11" W.C…
view full answer...Welcome back James! I recommend the Mach-C Everest Variable Speed RV Air Conditioner System item #CM35MR in white or item #CM55MR in black. These are complete AC systems that include an 18k variable speed air conditioning unit, an air distribution…
view full answer...From what you're saying you have a 3/8 Female Flare fitting on your regulator and need to connect to propane tank with a pigtail hose. While we don't currently carry an adapter hose to meet this need we do have some adapters that can help get…
view full answer...Thanks for the picture Ken! The LaSalle Bristol Drain Valve item #LSB44AR is exactly what you need. I checked with Grand Design and the 1-1/2" diameter fittings match up to what came on your trailer from the factory. To remove the old drain…
view full answer...Hey, Chris. Happy to help out! There is an option for you, but it won’t be a simple swap since we don’t have an axle with a 77.5" spring center and a 93.5" hub face. The closest option we have is the Dexter Trailer Axle Beam #7359765. This…
view full answer...Videos
for Propane Fittings
Help Articles
for Propane Fittings
Expert Answers
for Propane Fittings
The difference between the prices of the JR Products Automatic Changeover LP Gas Regulators and Camco Automatic Changeover 2-Stage Propane Regulators are in the BTU per hour, which as you correctly noted, is important information. The JR Products…
view full answer...Hey Mark, To plug the unused ports on your JR Products RV LP Gas Manifold #JR65CR you'll just need the JR Products RV LP Gas Manifold Plug #JR25CR. We also offer a couple of adapters to make your connection to the ports easier: 1/2" x…
view full answer...Hi Ron, Your 2013 Montana 3150RL has two propane tanks so you'll want a dual stage pressure regulator with automatic changeover. The automatic changeover will switch from the main tank to the reserve tank if the main tank were to run out of…
view full answer...To add a 100 lb tank to your two 30 lb tanks, I recommend the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports #103615. This will allow you to connect the red fitting to one of your tanks and the…
view full answer...Hello Royer, Thanks for writing in, we’re glad you found us! The correct wiring harness for your 2020 Toyota Highlander XLE without the factory tow package is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C76CR. Even…
view full answer...I attached a picture that shows what the typical dual tank setup looks like with the accessories needed labeled. First thing you need is pig tails to go from the tanks to the regulator like the part #100473-12. Then for a dual tank regulator with…
view full answer...Yes, there is a way to measure the fitting size to ensure it is the correct size to use with the Propane Adapter Fitting #37207-30225. The best way to do this would be to use a digital caliper like the #PTW80157. A 1/4" NPT fitting should…
view full answer...The Automatic Changeover RV LP Gas Regulator part #37207-30395 will be a great replacement for the Fairview GR-9984. The fittings are all the same so it should be an easy bolt-on swap. They are both auto-changeover regulators with an 11" W.C…
view full answer...Welcome back James! I recommend the Mach-C Everest Variable Speed RV Air Conditioner System item #CM35MR in white or item #CM55MR in black. These are complete AC systems that include an 18k variable speed air conditioning unit, an air distribution…
view full answer...From what you're saying you have a 3/8 Female Flare fitting on your regulator and need to connect to propane tank with a pigtail hose. While we don't currently carry an adapter hose to meet this need we do have some adapters that can help get…
view full answer...Thanks for the picture Ken! The LaSalle Bristol Drain Valve item #LSB44AR is exactly what you need. I checked with Grand Design and the 1-1/2" diameter fittings match up to what came on your trailer from the factory. To remove the old drain…
view full answer...Hey, Chris. Happy to help out! There is an option for you, but it won’t be a simple swap since we don’t have an axle with a 77.5" spring center and a 93.5" hub face. The closest option we have is the Dexter Trailer Axle Beam #7359765. This…
view full answer...Filters
- 379 results
Filter Results
Adapter Fittings
$5.32 - $124.04
Hoses
$13.03 - $148.27
Manifolds
$40.20 - $81.94
Regulators
$21.22 - $109.61
Tees
$15.50 - $135.14