Hey Hadiya! No, the Curt E16 5th Wheel Hitch w/ S20 Slider for Ram #C85PV will not give you enough clearance to maneuver the Layton Skyline 5th wheel with your 2021 Ram 1500 with a 5-1/2' bed. This unit only moves you 12" back from the…
Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…
Sergio, yes, the PullRite SuperGlide part #PUL63RR will work with your MORryde cushioned pin box like part #MR55QR. you will just need to pair it with the PullRite SuperGlide Quick Connect Capture Plate part #PUL76RR for the setup to function…
Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…
Hey Rob! You can actually use either one, but my recommendation would be the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches #BWGNRK1320-5W. B&W makes some of the best hitches available, and the Turnoverball is no…
Hey, Ron! I've got just the rails you need! B&W Custom Installation Kit part #BWRVK2401. This kit will come with the rails, frame brackets, and all the hardware needed for the install. Since this is a custom kit you will not have to do any…
Hey Doug. So long as your Husky 5th wheel hitch isn't three decades old you shouldn't have any issues attaching it to the B&W Custom Installation Kit w/ Base Rails item #BWRVK2402. Most 5th wheel hitches for the last 20 years have used…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…
Hi Chis yes, the PullRite SuperGlide #PUL93RR will work with your 2024 Ford F-250 short bed. This hitch will work with any industry standard rails, so as long as you have a set of those you'll be good to go. If you don't have any rails, then…
I do have an option for you if you have the PullRite SuperGlide #2700 which uses industry standard rails but if you have the PullRite SuperGlide #4100 you will need to get the rails from PullRite. For the PullRite SuperGlide #2700, you can use the…
There really is no way of knowing what set of 5th wheel base rails would work with the holes already in place without knowing what base rail kit was previously installed. That being said, the Curt Custom Fifth Wheel Installation Kit #C16418-204 is…
Hey Hadiya! No, the Curt E16 5th Wheel Hitch w/ S20 Slider for Ram #C85PV will not give you enough clearance to maneuver the Layton Skyline 5th wheel with your 2021 Ram 1500 with a 5-1/2' bed. This unit only moves you 12" back from the…
Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…
Sergio, yes, the PullRite SuperGlide part #PUL63RR will work with your MORryde cushioned pin box like part #MR55QR. you will just need to pair it with the PullRite SuperGlide Quick Connect Capture Plate part #PUL76RR for the setup to function…
Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…
Hey Rob! You can actually use either one, but my recommendation would be the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches #BWGNRK1320-5W. B&W makes some of the best hitches available, and the Turnoverball is no…
Hey, Ron! I've got just the rails you need! B&W Custom Installation Kit part #BWRVK2401. This kit will come with the rails, frame brackets, and all the hardware needed for the install. Since this is a custom kit you will not have to do any…
Hey Doug. So long as your Husky 5th wheel hitch isn't three decades old you shouldn't have any issues attaching it to the B&W Custom Installation Kit w/ Base Rails item #BWRVK2402. Most 5th wheel hitches for the last 20 years have used…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…
Hi Chis yes, the PullRite SuperGlide #PUL93RR will work with your 2024 Ford F-250 short bed. This hitch will work with any industry standard rails, so as long as you have a set of those you'll be good to go. If you don't have any rails, then…
I do have an option for you if you have the PullRite SuperGlide #2700 which uses industry standard rails but if you have the PullRite SuperGlide #4100 you will need to get the rails from PullRite. For the PullRite SuperGlide #2700, you can use the…
There really is no way of knowing what set of 5th wheel base rails would work with the holes already in place without knowing what base rail kit was previously installed. That being said, the Curt Custom Fifth Wheel Installation Kit #C16418-204 is…
Built for towing confidence, these rails keep your 5th wheel hitch stable and hold it in place while you tow. For beds shorter than 8', pair with a sliding hitch for extra clearance; trucks with factory puck or a gooseneck ball may use an adapter instead of above-bed rails. Installation can be tight near fuel tanks or heat shields, with high torque on 3/4" bolts, so removing the spare and using a long 3/4" or 19 mm ratcheting wrench can help.
You don't need rails if your hitch locks into the factory pucks or onto a gooseneck ball. If you want to run a hitch that mounts to above-bed rails, use adapter rails that connect to the factory pucks and provide a rail platform. Verify your truck has the factory puck system before ordering parts.
Yes, a sliding 5th wheel hitch is recommended for beds shorter than 8' to add clearance on tight turns. Confirm your bed length and that your hitch offers enough travel for your trailer's front cap. If you often maneuver in tight spaces, a slider helps reduce cab-to-trailer contact risk.
Access around the front driver-side bracket over the fuel tank is tight; removing the spare and working near the rear axle can help. A long 18 inch or longer ratcheting 3/4 inch or 19mm wrench is handy when a socket won't fit. Torque on 3/4" bolts is high. You may need to loosen heat shield bolts and tape washers in place to start nuts. Plan about 4 hours and study instructions carefully.
They're designed for hitches that mount to above-bed rails; check your hitch's mounting style and pin-hole spacing. Properly installed rails hold the hitch secure and help minimize movement when towing. For aluminum beds, confirm any required bed isolators or hardware specified by your truck or hitch instructions before you start.
5th Wheel Hitch Rails Parts or Accessories
Filters
