2018 Chevrolet Traverse Cabin Air Filter

Hey James, the Hollywood Racks RV Rider bike rack does not have a ramp option made for it. Do you have this bike rack already? If not, I'd go a different route for the e-bike rack like the Thule Easy Fold XT part #TH903202.

Hey Jeff, yes the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes #HLY64FR that you referenced would be a great option for you. It can be used in the hitch of your flat towed vehicle and it will be much easier than putting the bikes in your…

Hi Dave; yes, the Curt #C94WR also fits the 2025 Hyundai Tucson Hybrid. You can actually see it on a hybrid model in the picture I added to this page. The hitch has the 2" receiver you need and a max tongue weight of 525 lbs to handle your bike…

Hey David, thanks for reaching out. Hollywood actually makes a light kit specifically for the RV Rider Bike Rack, the Hollywood Racks Safety LED Light Bar for Bike Racks #HLY54RR. This uses straps that attach it directly to the crossmember of the…

Hey Kim, thanks for reaching out! The Kuat Piston SR Bike Rack #KU88ZR just sits straight out so while it doesn't sit lower, it definitely doesn't rise up so I can see why you have the concern about ground clearance on a 2024 Honda Odyssey.…

Hello Stu, thanks for getting in touch. For a travel trailer approved e-bike rack, what I recommend is the Swagman E-Spec Bike Rack #S94FR. This rack has a reenforced shank, making it suitable for RVs and travel trailers. It has a 70 lb per bike…

Hi Jacob, The #MA59FR won't work as a replacement for your MaxxFan Plus or Deluxe which uses the 4-button control. We do have the right replacement for you though, which is the following: - Replacement Key Wall Control For MaxxFan Plus and Deluxe…

The MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke #MA00-04500K is the similar fan to the 4951ksc. The issue you are having with the fan and lid are likely the circuit board which can be replaced with…

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

Hi Donald; for a trailer hitch with a 1-1/4" receiver that fits your 2019 Nissan Leaf I recommend the Curt #C49VV. This has a bolt-on installation and a concealed cross tube so only the receiver will be visible at the rear. It has a max tongue…

Hey Danny, yes the ramp part #KU63VR does fit the Kuat Piston Pro SR part #KU88ZR single bike rack.

Hi Edward; for a bike rack I recommend the 2019 Winnebago Intent Model 29L #HLY84FR. This is rated for motorhome use and has a capacity of 80 lbs per bike. From the center of the hitch pin hole to the farthest part of the rack is 27-1/2" so you…