2013 Ram 1500 Brake Controller

Features:

Bluetooth-enabled brake controller wirelessly connects to your smartphone, turning your phone into a brake control interface. The compact unit plugs in line with your 7-way trailer connector - no complicated install and no bulky cab-mounted unit.

Installation Notes:

Features:

Proportional brake controller automatically levels when mounted within a 360-degree vertical range. Includes digital display, 3 boost levels, battery protection and continuous diagnostics. Easily transfer between different automobiles.

Installation Notes:

To comply with California regulations, additional part number 30235-P is required for this trailer brake controller system in that state.

Tech Tip:

Outside California, part number 30235-P is also needed with this system at the 7-Way of the tow vehicle to ensure your brake lights activate when the override is used on the brake controller.

Features:

Brake controller activates trailer brakes in proportion to deceleration. LED screen shows settings and diagnostics. Features 3 boost levels. Automatically levels when mounted within 90-degrees in the vertical plane.

Installation Notes:

To comply with California regulations, additional part number 30235-P is required for this trailer brake controller system in that state.

Tech Tip:

Outside California, part number 30235-P is also needed with this system at the 7-Way of the tow vehicle to ensure your brake lights activate when the override is used on the brake controller.

Features:

Proportional brake controller installs anywhere in your cab and at any orientation. User-friendly, dash-mounted control knob with 10 tri-color LEDs creates a clean, OEM look. Easily adjust braking output, switch between modes, and view diagnostics.

Installation Notes:

Brake controller harness is designed to comply with California regulations when installed as instructed. Harness also ensures your tow vehicle brake lights activate when the override is used on the brake controller.

Because the vehicle already has a factory installed 7-way connector, the brake controller and wiring adapter are the only components needed for installation.

Features:

Proportional brake controller automatically levels when mounted within a 90-degree vertical range and a 40-degree horizontal range. Includes digital display, 9 sensitivity settings, reverse-polarity protection, and continuous diagnostics.

Installation Notes:

Brake controller harness is designed to comply with California regulations when installed as instructed. Harness also ensures your tow vehicle brake lights activate when the override is used on the brake controller.

Because the vehicle already has a factory installed 7-way connector, the brake controller and wiring adapter are the only components needed for installation.

Features:

Electronic controller activates electric trailer brakes with a preset intensity when you apply the brakes in your vehicle. Power output and braking aggressiveness are easily adjustable. Includes easy-to-read digital display and manual override.

Installation Notes:

Brake controller harness is designed to comply with California regulations when installed as instructed. Harness also ensures your tow vehicle brake lights activate when the override is used on the brake controller.

Because the vehicle already has a factory installed 7-way connector, the brake controller and wiring adapter are the only components needed for installation.

Features:

Brake controller engages trailer's brakes in proportion to deceleration. Mounts with included sleeve within a 125-degree range. Easily adjust power output and braking aggressiveness. Includes digital display, audible alert, and manual override.

Installation Notes:

Brake controller harness is designed to comply with California regulations when installed as instructed. Harness also ensures your tow vehicle brake lights activate when the override is used on the brake controller.

Because the vehicle already has a factory installed 7-way connector, the brake controller and wiring adapter are the only components needed for installation.

Installation Notes:

Brake controller harness is designed to comply with California regulations when installed as instructed. Harness also ensures your tow vehicle brake lights activate when the override is used on the brake controller.

Because the vehicle already has a factory installed 7-way connector, the brake controller and wiring adapter are the only components needed for installation.

Features:

Brake controller activates trailer brakes in proportion to deceleration. Plug-and-play design automatically syncs to your vehicle's computer network for precise braking. Pair with Tuson ActuLink actuator system for enhanced network monitoring.

Installation Notes:

To comply with California regulations, additional part number 30235-P is required for this trailer brake controller system in that state.

Features:

Brake controller activates trailer brakes in proportion to deceleration. Plug-and-play design automatically syncs to your vehicle's computer network for precise braking. Low speed brake adjustment. No directional mounting required.

Installation Notes:

To comply with California regulations, additional part number 30235-P is required for this trailer brake controller system in that state.

Features:

Brake controller activates trailer brakes in proportion to deceleration. Plug-and-play design automatically syncs to your vehicle's computer network for precise braking. No directional mounting required. Large display provides diagnostics.

Installation Notes:

To comply with California regulations, additional part number 30235-P is required for this trailer brake controller system in that state.

Features:

Mount the control knob of this brake controller on your dash or console, and affix the main unit in an out-of-the-way spot. Controller activates trailer brakes with a preset intensity when you apply the brakes in your vehicle. Great for off-roading.

Installation Notes:

To comply with California regulations, additional part number 30235-P is required for this trailer brake controller system in that state.

Features:

Mount the control knob of this brake controller on your dash or console, and affix the main unit in an out-of-the-way spot. Controller activates trailer brakes with a preset intensity when you apply the brakes in your vehicle. Great for off-roading.

Installation Notes:

To comply with California regulations, additional part number 30235-P is required for this trailer brake controller system in that state.

Tech Tip:

Outside California, part number 30235-P is also needed with this system at the 7-Way of the tow vehicle to ensure your brake lights activate when the override is used on the brake controller.

Features:

Mount the control knob of this proportional controller on your dash or console, and affix the main unit in an out-of-the-way spot. 3-Axis accelerometer ensures unit works no matter its positioning. Switch modes to get preset braking for off-roading.

Installation Notes:

To comply with California regulations, additional part number 30235-P is required for this trailer brake controller system in that state.

Tech Tip:

Outside California, part number 30235-P is also needed with this system at the 7-Way of the tow vehicle to ensure your brake lights activate when the override is used on the brake controller.

Features:

Mount the control knob of this proportional controller on your dash or console, and affix the main unit in an out-of-the-way spot. 3-Axis accelerometer ensures unit works no matter its positioning. Switch modes to get preset braking for off-roading.

Installation Notes:

To comply with California regulations, additional part number 30235-P is required for this trailer brake controller system in that state.

Features:

Electric brake controller installs on your trailer - no box to get in the way in your cab, and you can easily switch between different tow vehicles with no extra setup. Adjust power settings to suit your trailer weight and desired braking intensity.

Installation Notes:

Features:

Brake controller engages your trailer's brakes in proportion to deceleration. Mounts within a 125-degree vertical range. Easily adjust power output and braking aggressiveness. Solid-state design with digital display and manual override.

Installation Notes:

Brake controller harness is designed to comply with California regulations when installed as instructed. Harness also ensures your tow vehicle brake lights activate when the override is used on the brake controller.

Because the vehicle already has a factory installed 7-way connector, the brake controller and wiring adapter are the only components needed for installation.

Features:

Proportional brake controller mounts easily. Digital display indicates braking action of trailer. Fine-tune power adjustment has 5 levels so that you can set braking intensity to suit your towing needs.

Installation Notes:

Brake controller harness is designed to comply with California regulations when installed as instructed. Harness also ensures your tow vehicle brake lights activate when the override is used on the brake controller.

Because the vehicle already has a factory installed 7-way connector, the brake controller and wiring adapter are the only components needed for installation.

Features:

Proportional brake controller can be mounted within a 90-degree vertical range. LED monitor indicates braking action of trailer. Fine-tune power adjustment lets you set braking intensity to suit your towing needs.

Installation Notes:

To comply with California regulations, additional part number 30235-P is required for this trailer brake controller system in that state.

Tech Tip:

Outside California, part number 30235-P is also needed with this system at the 7-Way of the tow vehicle to ensure your brake lights activate when the override is used on the brake controller.

Features:

Proportional brake controller automatically levels when mounted within a 360-degree vertical range. Includes customizable LCD display, storable settings, 3 boost levels, battery protection and continuous diagnostics. Transferable between automobiles.

Installation Notes:

To comply with California regulations, additional part number 30235-P is required for this trailer brake controller system in that state.

Tech Tip:

Outside California, part number 30235-P is also needed with this system at the 7-Way of the tow vehicle to ensure your brake lights activate when the override is used on the brake controller.

Features:

Proportional brake controller automatically levels when mounted within a 90-degree vertical range. Includes digital display, 3 boost levels, battery protection and continuous diagnostics. Easily transfer between different automobiles.

Installation Notes:

To comply with California regulations, additional part number 30235-P is required for this trailer brake controller system in that state.

Tech Tip:

Outside California, part number 30235-P is also needed with this system at the 7-Way of the tow vehicle to ensure your brake lights activate when the override is used on the brake controller.