Product Experts Available Now!
Call 1-800-940-8924
EZ Connector Magnetic 7-Way Trailer Connectors w/ Watertight Seal - Hardwire - Vehicle/Trailer End
(80 reviews)
Price: $168.59
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
EZ Connector Magnetic 7-Way Trailer Connectors w/ Watertight Seal - Hardwire - Vehicle/Trailer End
Part Number: 319-R7-01
In Stock
$168.59
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (80)
- Q & A (0)
- Photos
EZ Connector Trailer Wiring - 319-R7-01
- Trailer Connectors
- Trailer and Vehicle End Connector
- Plug and Lead
- 7 Contact
- EZ Connector
Upgrade the 7-way connection on your vehicle and trailer with this complete kit. Built-in magnets create tight connection. O-rings make a watertight seal. Face-to-face contacts mean no bent or broken terminals. Includes plug holder and dummy plug.
Features:
- Trailer connectors install at the back of your vehicle and at the front of your trailer to power your trailer's signal lights
- Powerful magnet in socket joins with magnet in plug to keep connection secure
- Plugs stay tightly connected, despite the bumps and vibrations common with towing
- Face-to-face electrical contacts - no pins or blades to bend or break
- Eliminates concerns about electrical arcing and abraded pins
- Contacts are easy to clean when necessary
- Ideal for marine applications
- Double silicon O-ring on plug creates watertight seal with socket to keep out moisture and debris
- Water-block powder in cable keeps moisture away from wiring
- Plug holder and dummy plug keep terminals from becoming exposed when connectors are not in use
- Simple installation
- Hardwires to existing vehicle and trailer with included connectors
- Thumb notch on plug allows for easy alignment
- Twist plug until tabs line up and connector snaps into place
- Vehicle-end connector fits into factory socket mounting location on most newer vehicles
- Standard mounting bracket included
- Adapter brackets (sold separately) also available
- Made in the USA
Specs:
- Trailer-end cable length: 4'
- Vehicle-end wiring harness length: 2'
- Wiring configuration:
- White: ground
- Red: left turn
- Brown: right turn
- Black: auxiliary power
- Green: tail lights
- Yellow: reverse lights
- Blue: brakes
- Wire gauges:
- 14 Gauge: red, brown, green, and yellow
- 12 Gauge: blue
- 10 Gauge: white and black
- Limited lifetime warranty
These connectors give you the functionality of a 7-way connection, but without any pins or blades to bend or break. They're designed to create a secure, watertight connection that lasts. Strong magnets in both the plug and the socket keep the connection tight and secure, even when you're driving on rough terrain. Built-in O-rings create a seal to keep out water and debris. And spring-loaded, face-to-face electrical contacts are long-lasting and easy to clean. These factors combine for a strong, durable connection that's easy to use and to maintain.
Magnetic Plugs Stay Connected
The EZ Connector system uses magnets inside the plug and socket to hold the connectors together. Simply insert the trailer-end plug into the vehicle-end socket and the internal magnets will snap them together, no latch needed. To disconnect, just pull the plug out by hand.
This is an improvement over typical trailer connectors, which rely on a plastic latch on the socket lid to hold the trailer plug in place. With any trailer connector it can be easy to forget to disconnect the wiring when you unhook your trailer. If you drive off without disconnecting a standard 7-way plug, the connector will get pulled out of the socket, likely tearing off the lid. Without a lid, the electrical terminals are exposed to damaging moisture and debris. But if you forget to remove the EZ Connector plug when unhooking your trailer, the plug will simply disconnect from the receptacle as you drive off.
The magnets inside of these trailer connectors are made of neodymium, an extra-strong, rare-earth alloy. These high-quality magnets ensure a tight connection between the connectors that is stable enough to make it through intense bumps and road vibration.
Silicon O-Rings Create Watertight Seal
The EZ Connector trailer-end plug has a double O-ring that will create a watertight seal with the socket when it's inserted into the vehicle-end connector.
Once you disconnect your trailer from your vehicle, just insert the included dummy plug into the EZ Connector socket. This plug also has a double O-ring designed to seal to the socket, keeping out moisture and debris.
A storage holder is included to keep the trailer-end EZ Connector plug safe and dry when it's not in use. This holder conveniently attaches to your trailer so that it is always available when you need it. This ensures that the terminals on the plug and socket stay protected from moisture and debris at all times.
All of the EZ Connector systems have earned a perfect score on the SAE water submersion test. This means that the seal created on these connectors will stay watertight, even if the connectors are completely submerged in water for extended periods of time.
No Pins or Blades to Bend or Break
The EZ Connector plug and socket both have spring-loaded, face-to-face electrical contacts instead of pins or blades. Pins and blades can bend, corrode, and even break off, which can lead to a permanently damaged connection. With the EZ Connector system, there are no pins or blades to bend or break. Because there are no pins or blades, there are also no pin sockets on the trailer-end plug that can trap debris. And if any dirt or debris does collect on the terminals of either end of an EZ Connector setup, it can be quickly and easily wiped away. No more scraping pins to get grime off. The result of all of this is a quality, effective connection every time you plug in.
R7-01 Easy Connector 7-Way, RV-Style Trailer Connector Kit - Vehicle Side and Trailer Side - Hardwire
Installation Details
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- etrailer mistake
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.7
80 reviews
by:
Dennis
12/28/2025
Ran over debree from a semi tire carcus on I 75. It ripped the electrical cord out of the E-Zee plug going into my truck. The plug stayed in place even having the cord ripped out of it. Guess why I ordered a new one, I’ve never experienced a connection issue! Thank you Dennis Horton
by:
Paul
06/26/2024
The trailer plug is indeed novel and seems well-made: that said, the pigtail provided on the trailer side of the plug is BARELY long enough to make the reach to the truck!
Luckily, I'm good at repairing poor designs...:)
Luckily, I'm good at repairing poor designs...:)
by:
Christopher Boehm
06/21/2018
Firstly, the product looks and feels like a quality product. The quality of the rubber, the strands of copper in the wire are thin to make the cord more flexible, and the secure grip of the magnet all give the impression of quality. The mounts are nice and the covers on each end fit really nice.
Secondly, my interaction with Dena was really helpful and professional. She really made an extra effort to make sure the order was correct and she was so polite about it.
I always had connection problems with the spade connectors and was never quite sure if my trailer lights would be blinking when I walked around to check the lights. I use one van and have 3 trailers for different purposes. There's nothing more annoying than seeing the lights are out when you want to take off in a hurry. The bolts are stainless which is always a sign of a quality product.
I think direct flat surface pin to pin contact is a reliable means of conducting electricity.
Secondly, my interaction with Dena was really helpful and professional. She really made an extra effort to make sure the order was correct and she was so polite about it.
I always had connection problems with the spade connectors and was never quite sure if my trailer lights would be blinking when I walked around to check the lights. I use one van and have 3 trailers for different purposes. There's nothing more annoying than seeing the lights are out when you want to take off in a hurry. The bolts are stainless which is always a sign of a quality product.
I think direct flat surface pin to pin contact is a reliable means of conducting electricity.
Christopher B.
6/21/2019
I use the trailer a lot and every time I plug it in, I get the feeling that my connection is secure. No signes of wear or corrosion after one year.
by:
Stephan
02/28/2026
Excellent product,makes hooking and unhooking a breeze.
by:
Robert
11/30/2022
While I think the plug will perform very well (well made, excellent sealing ability), I was stimmed by the truck installation portion of the project. After many trials and errors, I hired an experienced mobile RV service. He too had many problems. After contacting e-trailer, it was determined that the 2002 Ford Excursion 7.3 is NOT "plug and play" wire color to wire color. He gave us the correct wire color connections for the truck and trailer and it worked perfectly.
Robert
12/1/2023
A very reliable and consistent method of making the truck to trailer 12v hookup. Weather impervious have experience travel in heavy snow and rain. Highly recommend this connection to the traditional 7-way.
by:
Michael
05/11/2020
I haven't actually used the products as yet, as my new trailer is still on order. I needed to get my Chevy Equinox tow ready so I ordered early. As usual, etrailer.com was very prompt with my shipment. Everything arrived with plenty of time to get them to my installer!
Mike S.
5/12/2021
Its been wonderful!Late last summer,I made a 4500 mi. run to SW OR to pick up a car that I had bought. I ran into a blizzard in WY mind you, it was still Summer with all the muck & slush Ma Nature could muster. Didnt have a bit of trouble with the trailer electrics! I am very satisfied!!!
by:
Mary
10/21/2022
This is a very strong connector. No more bad connections on the road! Excellent product. For me as a female, disconnecting the plug is actually a bit difficult because the magnets are so strong. But I manage and it feels great not to worry about this connection anymore.
None
10/22/2023
The connector is still working great. The seal is strong and I never lose connection. I love the feature of having a magnetic cover for the connector when it is not being used. It is protected at all times.
Mike L.
11/10/2023
@None That IS a cool feature!
by:
Spencer
11/24/2024
By far the best and most reliable 7-pin connector anywhere. With the included magnetic dust caps, electrical connections are always clean, and reliable. I use these on an overland trailer that sees water frequently, and I’ve never had an issue. Highly recommend!
by:
Ray kuduk
03/21/2019
I needed a good waterproof connector for my snowblower and I think I just found one. I didn’t get it connected yet but I think it’s going to work
Ray K.
3/22/2020
Great I’ve had no problems with this winter with my big snowblower
by:
Mike
10/03/2023
The best trailer connector available. Should be on all Trailers.
Mike
10/4/2024
The ez connector has been working as good as the first day! No issues should be on all RV’s.
by:
David
05/24/2021
Shipping was fast. Have not installed them but I'll update when I do. Excited to have plugs that work more than half the time!!:)
David
5/25/2022
Working good
by:
Greg G.
05/23/2021
I really like dealing with etrailer.
Great selection at very competitive prices.
My last order arrived with one item slightly damaged. etrailer made it right quickly, easily and no hassle.
Bought the EZ connector trailer plug system for a new truck. A well thought out system that sure looks like it's going to be way better then any other trailer plug I've seen.
Great selection at very competitive prices.
My last order arrived with one item slightly damaged. etrailer made it right quickly, easily and no hassle.
Bought the EZ connector trailer plug system for a new truck. A well thought out system that sure looks like it's going to be way better then any other trailer plug I've seen.
by:
MP
06/28/2022
Couldn't be better! My wiring connection went from being a constant worry to a never worry. The EZ Connector just works. I love that it seals. All the connections still look new. Even has a sealing storage receptacle for when it isn't connected. I will never have another camper without it.
by:
Stanton
02/16/2023
Awesome design for an electrical coupler. Prevents unwanted water intrusion and is super easy to use.
Only complaint is that the trailer side pigtail is too short to allow the end user to terminate the connections where needed if you have a long trailer tongue.
Only complaint is that the trailer side pigtail is too short to allow the end user to terminate the connections where needed if you have a long trailer tongue.
by:
Larry
05/12/2020
I have converted my trucks and trailers to the magnetic EZ Connectors. I love them and I recommend them. They are trouble free in my experience. They stay clean and functional in all kinds of weather.
From time to time we have someone else using one of our trailers, etc., so having adapters available is a good idea.
Great service from etrailer.com
From time to time we have someone else using one of our trailers, etc., so having adapters available is a good idea.
Great service from etrailer.com
by:
Michael
07/10/2019
I was tired of having connection problems with the standard 7 prong trailer plugs, I did not like the fact that I could not count on my trailer brakes 100% of the time to help me stop or slow down in an emergency. After doing some research I found that people were having good luck with these EZ Connectors. I was working on my standard plugs all of the time. I know that rough dirt roads and driving over roads treated with magnesium chloride did not help with my connection issues, but I finally had enough and purchased what I believe is the best trailer connector made, The EZ Connector is completely sealed and the contacts are under constant pressure when in use, It also came with magnetic caps for both ends to keep the socket clean when I am not pulling. It is made in the USA so that makes me happy as well. I am very pleased with this product, and the service I received from etrailer was Top Notch.
by:
Dwayne
10/30/2021
I love this connector. When I first read the description for this product I thought where has this product been? I have it installed on my Class A motorhome and Jeep. The best modification ever! When the cables are connected 100% confidence the Jeep tail/brake/turn signals are working. Love it! No more spreading pins or reconnecting cables.
by:
Alex
11/26/2020
Have had this product for one year now. We drive a lot of gravel roads with our truck and trailer. The magnetic connection and watertight seal keep all water and debris out of the connections. Haven’t had one issue with poor connections. Will definitely be upgrading more trailers to this connection!
by:
Terry
12/31/2022
This is by far the best upgrade to my trailer,for the mere fact that I do not have to worry about it coming detached and losing my brakes on a steep down hill,it should be standered on all new trailers if the manufacturers give a darn!
by:
Mark
11/30/2022
I like the design and function off the plugs but the lack of wire for the trailer plug is a big concern. Instead of splicing it would rather have enough to go to the junction box
by:
Tom
11/30/2024
it does exactly what i was looking for.
we pulled home to potatoe storage 900 trailers without a single issue with our harvest. Great product.
we pulled home to potatoe storage 900 trailers without a single issue with our harvest. Great product.
by:
Lesgo Brandon
07/23/2022
I love the convenience of having a magnetic connector. Unfortunately after 6 months the connector gives me problems with a solid connection. If it was just a matter of plug and go I would give 5 stars.
by:
Kevin
05/13/2021
Great item - install is a bit intricate , but the included instructions give plenty of detail to assist . Some electrical knowledge is definitely helpful . Security of the connection is the primary reason this is a huge upgrade from the normal 7-pin . I have a Propride hitch which puts additional stress on my 7-pin and this completely eliminates any issues .
by:
William
06/04/2025
Overall very pleased with this product. If I had one issue it would be with the durability. When i took my trailer out of storage this spring, the the cover you place over the trailer side connector plug broke. It he magnet still works well but the plastic cover broke. Other than that i love the ease of use.
by:
James S
05/13/2024
Great contact, with the regular 7 pin I would get “trailer disconnected’ warning and would lose backup camera. Haven’t lost connection yet in 400 miles.
25
80
true
Show More Reviews
See what our Experts say about this EZ Connector Trailer Wiring
- What to Do About Corroded EZ Connector 7-WayHey Timothy, that's really a bummer that your EZ Connector 7-way corroded so badly. They aren't known to do this so it is a bit of a surprise. If you are running short on time you might just led the connector soak in Coca Cola as that will eat away all of the corrosion (makes you wonder what it does to your stomach...) but either way do you have a standard 7-way picked out already and you were wanting to just share what your EZ Connector looks like or were you wanting a recommendation for...
view full answer... - EZ Connector Magnetic 7-Way Trailer Connectors For 2016 Ram 3500Hey Thomas, thanks for reaching out. We do have an EZ connector kit for your 2016 Ram 3500, but the # 319-R7-01 you mentioned is a universal hardwire kit, and we actually have a more custom fitted kit for your truck. For a 2016 Ram 3500 I recommend the following: - EZ Connector Magnetic 7-Way Trailer Connectors w/ Watertight Seal - Custom - Vehicle/Trailer End # 319-R7-02 This comes with a custom vehicle side harness so as long as your truck has the factory 7-way it'll just plug right...
view full answer... - Parts Needed To Connect Lights From A Removable Trailer Extension To A 5th WheelHi Rick, I am aware of the Swivelwheel extenders, though not the Blue Ox ones, so I do have an idea of what you are attempting to achieve. It sounds like what you are looking to do should pose no problems at all and shouldn't be too difficult either, especially if you are familiar with wiring. You will, of course, need some butt connectors, wiring, and both trailer and vehicle side 7 Way connectors. I have a list of everything you would need listed out below, but I included two different...
view full answer... - Does EZ Connector 7-Way come with Traditional 7-Way AdapterHey Mark, so the EZ Connector Magnetic 7-Way Trailer Connectors # 319-R7-01 does not come with a standard 7-way adapter BUT we do have that available with the part # 319-R7-52 so you'd want this too.
view full answer... - Can You Install EZ Connector Magnetic 7-Way On the Nissan Frontier?Hello Bruno. Yes, the EZ Connector Magnetic 7-Way Trailer Connectors w/ Watertight Seal - Hardwire - Vehicle/Trailer End # 319-R7-01 would install onto the 2011 Nissan Frontier. It would replace the current 7 way connector that is already on the back of the vehicle and will need to be hardwired in. If your vehicle did not come with the tow package and you do not currently have a 7 way on the back of the Frontier please let me know.
view full answer... - Does The EZ Connector 319-R7-01 Come With A Coiled Or Straight Trailer Side Cable?Hello Alex. Yes, you are correct. The EZ Connector kit # 319-R7-01 does come with a non-coiled trailer side cable. There are other kits available that come with coiled cables, but the # 319-R7-01 is a straight cable.
view full answer... - What is Width of Mounting Bracket of EZ Connector Magnetic 7-Way Trailer Connectors Hey Jerry, the width of the mounting bracket of the EZ Connector Magnetic 7-Way Trailer Connectors w/ Watertight Seal # 319-R7-01 that you referenced is 4 inches. Would that be small enough to work?
view full answer... - Recommended Waterproof 7-Wire Socket For A Flat Towed 2024 Jeep Wrangler Hey Ron, We don't currently offer a replacement 6-pole socket with a waterproof screw cap instead of the spring loaded cover. EZ-Connector has a magnetic 7-way # 319-R7-01 that you could potentially switch to since it has a waterproof plug to push into the socket. You can use the female socket side of this on the Wrangler and then splice on the male side to your 7-wire cable connecting the motorhome and Wrangler together. When not in use the plug will prevent water from seeping into the...
view full answer... - What All is Needed to Add an EZ Connector to a 2012 Expedition and Trailer?Switching over to the EZ Connector Magnetic 7-Way # 319-R7-01 will lose the 4 flat connection. However, I do have a couple solutions for you. First will be the Trailer Connector Adapter # 319-R7-54. This will adapt a standard 4 flat to work with the # 319-R7-01. If you preferred to keep a 4 flat plug, it will be a little more complicated, but not overly so. To do this, you will need to splice a 4 flat, like the Curt # C58345, either into the # 319-R7-01 at some point, or where the #...
view full answer...
- Wiring Solution to Match 2004 Lance In-Bed Camper with Truck 7-Way SocketHey Mike, thanks for reaching out! I don't know why Lance chose to make their own unique connector but I do know that it's been a pain point for Lance camper owners for quite a while. We actually recommend cutting off the Lance connector and replacing it with a standard 7-Way like the Hopkins # H20046 so the connector will match perfectly with your 2011 Ford F-350 Super Duty 7-way socket. Just be sure you wire the Hopkins wiring to the correct function instead of trying to match wires...
view full answer...
- Which Magnetic 7-way Connector Harness Is Correct For 2014 Toyota TacomaThanks for the pictures! Since your 2014 Toyota Tacoma has a 7-way connector that is hardwired in you will need to cut the wires from the factory connector and hardwire them to the EZ Connector Magnetic 7-Way Trailer Connectors w/ Watertight Seal - Hardwire - Vehicle/Trailer End # 319-R7-01. Before removing the factory wires from your connector you will want to use a circuit tester # PTW2993 to test the functions of each wire to make sure they get connected to the new connector in the...
view full answer...
- Recommendation for Extending Trailer-End Cable Included with EZ Connector Magnetic 7-Way KitThe EZ Connector Magnetic 7-Way Trailer Connectors # 319-R7-01 referenced in your question includes a 2 foot long vehicle-end cable length and a 4 foot long trailer-end cable length. There is not a kit available that features a longer trailer end cable length. If you need to extend the wiring on the trailer side connector, I simply recommend using the Deka Wire Jacketed 7-Wire # DW04914-1. This jacketed 7-wire is sold by the foot, so you can order exactly the length that you are needing....
view full answer... - What Is The Maximum Power Rating For EZ Connector Magnetic 7-Way Trailer Connectors Charge Line?The EZ Connector Magnetic 7-Way Trailer Connectors # 319-R7-01 are rated for up to 40amps of power on the 10 gauge wiring. These wires are for the charge line and ground wire circuits. The lighting and brake line wires uses smalle 12 and 14 gauge wire and will have lower ratings for their wires.
view full answer... - Adapters To Tow Trailers With 4-Way/5-Way Flat and 7-Blade Connectors After Installing EZ ConnectorsAfter you convert your truck and trailer using the EZ Connector Magnetic 7-Way Trailer Connectors # 319-R7-01 you would then simply need the 7-Way Adapter # 319-R7-52 with a 7-Way to 5-Flat Adapter # A75TB to connect to your other trailer. These adapters will also allow you to connect to a 4-way flat or a standard 7-way blade using the first adapter only.
view full answer... - Parts Needed To Add 2nd Magnetic Connector To 5TH Wheel Trailer To Work With EZ Connector WiringYou can use the EZ Connector Magnetic 7-Way Trailer Connectors # 319-R7-01 with the EZ Connector Magnetic 7-Way Trailer Connector # 319-S7-10 you already ordered. This will allow you to remove the cable completely and provide a much cleaner appearance for your 5th wheel. To splice the 2 male ends together you will match the wiring color for color. On the trailer end connector you will need to verify the functions of each of your connectors when splicing them together. The EZ Connector...
view full answer... - 7-Way Trailer Connector Tab Wont Line Up with Notch on ReceptacleIt's possible that the plug or receptacle was made improperly. If you would like to try and shave some plastic off either side to make it work you're welcome to do so but I recommend switching them out so you don't ever have to worry about a loose fit or the plug/receptacle failing again. This is a great opportunity to upgrade as well to the EZ Connector Magnetic 7-Way Trailer Connectors part # 319-R7-01 which is soo much easier to plug in and remove.
view full answer... - Does The EZ Connector Work On The 2017 Ford F-350?Hello Tim. So, the EZ Connector Magnetic 7-Way Trailer Connectors # 319-R7-02 are designed to be universal. It will work on virtually any vehicle with that uses the standard USCAR connectors for its trailer wiring. Did your 2017 F-350 come from the factory with a 7-way plug? If so, it will have the USCAR connectors and the 319-R7-02 will work great. If your 7-way is aftermarket, you would have to splice in the EZ Connector using the # 319-R7-01 kit.
view full answer... - EZ Connector 7-Way Kit for 2020 Ford F-250 and TrailerTo upgrade the 7-way setup of your 2020 Ford F-250 to the watertight EZ connectors the correct kit you'd need is the part # 319-R7-01 which comes with everything to convert both the trailer and vehicle wiring.
view full answer... - Will EZ Connector Magnetic 7-Way Trailer Connector Fit in Cab and Chassis Square Well in BedThe back of the EZ Connector Magnetic 7-Way Trailer Connector with 8' Long Cable # 319-S7-10 plug measures about 2-3/8" from where it connects to the vehicle-side connector which is about the same as what you find with a standard 7-Way so you should be just fine with your current clearance. The part mentioned above is the trailer end with a storage-type of base unit for when you aren't using it. If you're wanting to add this system to your towing setup then you need the kit # 319-R7-01...
view full answer...
Do you have a question about this Trailer Wiring?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Updated by:
Wilson B
Updated by:
Noah M
Written by:
Alexander C
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Paul
6/28/2025
Not as great as I had hoped: the o-rings swelled to the point the plug would not fully seat home, thereby making bad connections, and the non-gold plated contacts keep needing polishing to remain electrically continuous.