Will EZ Connector Magnetic 7-Way Trailer Connector Fit in Cab and Chassis Square Well in Bed
Updated 11/28/2022 | Published 11/27/2022
Products Featured in This Question
Question:
I have a 2008 Chevrolet Silverado 3500 HD Cab/chassis with a flat bead installed. My gooseneck ball is located in a square well in the flat bed along with the trailer connection for the electrical. How much clearance is needed for the EZ Connector. If a picture is needed for an illustration, please let me know. Thank you
asked by: Wade B
Expert Reply:
The back of the EZ Connector Magnetic 7-Way Trailer Connector with 8' Long Cable # 319-S7-10 plug measures about 2-3/8" from where it connects to the vehicle-side connector which is about the same as what you find with a standard 7-Way so you should be just fine with your current clearance.
The part mentioned above is the trailer end with a storage-type of base unit for when you aren't using it. If you're wanting to add this system to your towing setup then you need the kit # 319-R7-01 which comes with the vehicle and trailer end connectors.
Attached are some review videos for you to check out.
Product Page this Question was Asked From
EZ Connector Magnetic 7-Way Trailer Connector with 8' Long Cable - Watertight Seal - Trailer End
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 7 Contact
- Plug and Lead
- EZ Connector
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Kodiak 225 Stainless Calipers Assembly Rebuild Kit KDBC250KIT
- Article: Trailer Lighting Requirements
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: 2022 Ford F-350 Plug-In Wiring Harness for In-Bed Truck Camper
- Q&A: Does Black Wire on 7-Way Go To 12V Power
- Q&A: Is There an Advantage to Switching From 7-Way Pin Connector to 7-Way Blade
- Q&A: EZ Connector Magnetic 7-Way Trailer Connectors For 2016 Ram 3500
- Q&A: Nicer Looking Aluminum Wheel and Tire Combo with Tire Size ST235/85R16 with 8 Lug Bolt Pattern
- Q&A: Recommended EZ Connector Magnetic 7-Way to Replace Factory 7-Way Connector
- Article: Trailer Wiring Diagrams
- Article: Practice Safe Trailer Towing with These 4 Tips
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)