Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Getting a trailer low enough to load cars or heavy gear safely can be tricky. This hanger kit makes it simple with 1-1/2" tall front and rear hangers and 2-1/2" tall center hangers that keep the deck closer to the ground. It’s a solid setup for tandem systems where a lower ride height improves stability and loading angle without giving up suspension travel.
Rough roads and uneven driveways can throw weight around between axles. The 7-3/4" long curved equalizers are built to pivot and distribute that load evenly as your trailer moves. They help both axles stay planted so the suspension works smoothly through bumps and dips, keeping everything balanced as it should be.
Nothing slows a rebuild more than missing parts. This kit includes everything needed to hang your double-eye leaf springs to the frame—hangers, equalizers, shackle straps, bolts, and locknuts. The hardware ties the system together so the springs swing freely with no binding, giving you the consistent suspension action a tandem setup needs.
Loose hardware can throw a suspension out of line fast. Each of the fourteen 3" x 9/16" shackle bolts pairs with a matching locknut to keep the connection snug without over-tightening. Torque them until they seat, add a quarter turn, and the locknuts will hold fast while the springs move easily through their range.
Keeping enough space between the frame and axle lets your suspension flex without bottoming out. This kit sets up a clearance of 3-1/2" or 3-3/4", depending on axle size, for proper travel under load. It’s designed for tandem, 2,000-lb to 7,000-lb axles, giving you dependable geometry and ride height across a wide range of builds.
| Leaf Springs | A - Distance Between Front and Center Hangers | B - Distance Between Center and Rear Hangers | C - Distance Between U-Bolts | D - Distance Between Center of Axle and Trailer Frame | Axle Diameter |
|---|---|---|---|---|---|
| SP-169275 (1020) | 24-3/4" | 24-3/4" | 30" | 3-3/4" | 1-3/4" (typical 2,000-lb trailer axle) |
| SP-219275 (PR722) SP-220275 (PR3) SP-218275 (PR4) SP-212275 (PR4B) SP-111275 (PR5) SP-198275 (PR6) | 29-1/2" | 29-1/2" | 33-1/2" | 3-1/2" | 2-3/8" (typical 3,500-lb trailer axle) |

Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews

Laura E.
3/13/2017
Michael, you could lubricate the bushings if you want to with a multi-purpose grease, but the nylon bushings dont necessarily require lubrication, so there isnt a particular technique. We offer wet bolts that have a grease zerk on them to pump grease through, but other than that, the nylon bushings are designed to provide smooth operation until they wear down to a point where they should be replaced.

Michael
2/5/2018
The parts I bought from you to repair the suspension on our livestocktrailer did the trick of getting it roadworthy. We dont use it often, butthe couple times weve had it on the road since the repairs have beenuneventful and thats a good thing when you have a couple tons of beef onit.

Michael
2/25/2023
Working great, dont worry about the suspension, everything is working perfectly.

Jcfohio
7/10/2018
They are still performing but are very rusty. I should have put my own paint on them to prolong their life.

Brooke M.
5/24/2022
Thank you for reaching back out. I have sent your information along to our customer service team.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Ranger T.
1/19/2024
The springs and hangers are still working great. Exactly what I needed.