Troubleshooting Broken Leaf Spring On a Boat Trailer With Tandem Axles Mounted Individually
Updated 08/16/2023 | Published 08/15/2023 >
Products Featured in This Question
Question:
Is the single leaf spring with dual axles designed to be used with an equalizer on a boat trailer? My rear spring is broke. Also only the rear of the springs have shackles currently. This is how it has been before I bought it 2 years ago.
asked by: Chris B
Expert Reply:
I recommend any trailer with a tandem axle setup use an equalizer regardless of the amount of leaves in the spring or if it is a double eye or slipper spring design. On a system like your trailer where each axle is mounted individually and not connected one axle will carry more of its share of the weight when one axle lowers due to road angles or unlevel trailer positioning. An equalizer setup like the Tandem-Axle Trailer Hanger Kit # APT3 will allow the suspension to continue to spread out the load more evenly across both axles since it provides articulation to the suspension.
As for you mention of only the rear portion of the leaf springs having a shackle, this is normal when used on a single axle setup. The shackle allows the spring to lengthen under load when the spring flattens. Without this the suspension wouldn't compress it would eventually break under load.
Product Page this Question was Asked From
1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Bushing Not Included
- 6000 lbs
- 1-3/4 Inch Wide
- 1 Leaf
- 25-1/4 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Shop: Trailer Hitch
- Search Results: over under
- Search Results: over under conversion
- Search Results: axle flip kit
- Shop: 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Video: 4-Leaf Double-Eye Spring for 5,200-lb Trailer Axles Spec Review
- Q&A: Spring Spring Hanger Spacing for Spring e46SR
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Video: An In-Depth Look at the 1-Leaf Double-Eye Spring for 6,000-lb Trailer Axles
- Search Results: tjd8000s
- Search Results: akebrk~35
- Search Results: curt echo
- Search Results: 68149
- Q&A: Do You Carry Add a Leaf for Trailer Leaf Springs?
- Q&A: Adding Lift to 3,500 lb Trailer Axle
- Q&A: What is Advantage to Single Leaf Trailer Leaf Spring
- Q&A: Can Leaf Spring Part # e46SR Be Mounted Above and Below Trailer Axle
- Q&A: What is the Hanger Spacing on the 6-Leaf Slipper Spring # e46SR?
- Q&A: Can Trailer Weight Capacity Be Increased by Changing One Trailer Axle
- Video: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers Review
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Shop: Suspension Enhancement
- Article: Trailer Lighting Requirements
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Video: In-Depth Review of the CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles


