Available Lippert 5th Wheel Trailer Shock Absorber Kits

Updated 01/21/2020 | Published 03/04/2017

Products Featured in This Question

Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 3,500-lb (2-3/8") Axle

(87)

$190.27

Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle

(87)

$236.39

Question:

I recently had a MOR/Ryde SRE 4000 system added to my 2002 Carriage Cameo LXI 5th Wheel. This increased the distance between the axle and the frame which meant the stock shocks could no longer be used. I would like to add aftermarket shocks, but only need the shocks as the mounting brackets are already present. The mounts are about 14 inches apart - can you help me?

asked by: Steve

Expert Reply:

We offer two heavy-duty trailer oil shock kits from Lippert, who makes most of the RV frames in use. Those kits are designed for either 3-inch axle tubes, part # LC281281, or for 2-3/8-inch axle tubes, part # LC281255. Both kits include mounting brackets. The shocks in both kits measure 13-1/2-inches long when extended.

expert reply by: Adam R

Mike C.

1/20/2020

would these work on 8thousand lb axles

Jason S.

1/21/2020

If your 8,000 lb axles have a 3 inch diameter then the Lippert Components Bolt-On Shock Kit w/ Heavy Duty Gas Shocks # LC281281 would work. Most 8k axles are a 3-1/2 inch diameter, so you'd need a different kit like the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 8,000-lb Axle # RM-2470. This is my recommendation for your trailer.

Helpful Links

tv-Demo-Lippert-Components-Trailer-Suspension-LC281281.aspx

tv-review-roadmaster-comfort-ride-shock-absorbers-rm-2460.aspx