Recommended Axle Flip Kit for a 2-3/8" Axle with 2" Wide Leaf Springs
Updated 09/10/2026 | Published 09/05/2026 >
Products Featured in This Question
Question:
I have a Lippert 2-3/8 3500 axle that I want to convert to an overslung setup. The kit info says up to 1-5/8 wide leaf springs, mine are 2 wide. I was also interested in adding the gas shock kit for that same axle. The shock kit has new bottom plates, but there is mention as to how wide of a leaf spring the shock kit can accomadate. Im hoping the shock kit will work withg my 2 wide springs.
asked by: Jim E
Expert Reply:
Hey Jim!
The Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 would normally be the right kit for a 2-3/8" diameter, 3,500-lb axle, but the hardware included with that kit is only designed for leaf springs up to 1-5/8" wide, so it won't work as-is with your 2" wide springs.
You can still convert your axle to an overslung setup, though. Instead of using the complete Dexter kit, you can piece it together with the Spring Seat # TRSS238, which fits a 2-3/8" axle tube and 2" wide leaf springs, along with four 5-1/2" U-Bolts # 176400. The new spring seats will need to be properly positioned and welded to the top of the axle tube.
For the shocks, the Lippert Bolt-On Shock Kit # LC281255 will work with your setup. I checked directly with Lippert and they confirmed that this kit is selected by axle tube diameter rather than leaf spring width. Since you have a 2-3/8" axle tube, your 2" wide springs won't be an issue. The kit also includes the # LC22FR lower shock mounting plates, so those will replace the standard lower spring plates in the setup.
That combination will let you move the axle below the springs and add the Lippert gas shocks while keeping your existing 2" wide leaf springs.
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Raise Your Travel Trailer Height
- Q&A: Replacement Water Heater for 2001 Keystone Springdale
- Q&A: Parts Needed To Move Axles From The Top Of The Leaf Spring To The Bottom On The Leaf Spring
- Q&A: Adding Lift to 3,500 lb Trailer Axle
- Q&A: MORryde Suspension Upgrade Kit For 2021 Northwoods Nash 24b Travel Trailer
- Q&A: Replacement 2,500 lbs - 3,500 lbs Axle w/a 86.5" Hub Face and a 68.5" Spring Center
- Q&A: Availability of Lift Kit for 2024 Sports Haven Utility Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement 3,500 lbs Axle w/a 86.5" Hub Face and a 68.5" Spring Center
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern


Jim E.
9/10/2026
Jerry, thanks for the thorough answer to my question. I will be purchasing this week.