Which Shocks Fit Dexter Axle on Trailer
Published 10/07/2025
Products Featured in This Question
Question:
Which shocks fits my Dexter axle 065904? Thank you.
asked by: Ronald
Expert Reply:
Hi Ronald; a search points to that being a 7k axle but I don't have a way to be sure without the serial number off of the axle tag. You can also measure your axle diameter which is enough to find the right kit. If you have a 3" diameter overslung axle (leaf springs on top of the axle) the # LC281281 is the correct kit. If it is a 2-3/8" overslung axle you need # LC281255 instead.
If your leaf springs run under the axle the only option is the Roadmaster Comfort Ride Shock Absorbers. These are higher quality shocks with better performance overall so it is worth considering them over the Lippert even if you have overslung axles. If your axle has a diameter of 2-3/8" you need # RM-2450 and for a 3" axle # RM-2460.
Is this for your Tritoon trailer or do you have something else now?
(click to enlarge)
Product Page this Question was Asked From
Lippert Heavy-Duty Replacement Shock - Yellow
- Accessories and Parts
- Trailer Suspension Parts
- Shocks
- Lippert
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer leaf springs
- Search Results: rv shocks
- Search Results: roadmaster comfort ride
- Search Results: 3500 lbs trailer leaf springs
- Search Results: bearing buddy trailer bearings races seals caps
- Q&A: Do I Need to Get the Roadmaster Comfort Ride System with Shocks and Springs
- Shop: Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle
- Q&A: Disc Brake Kit Recommendation for 2022 Grand Design Reflection 337RLS
- Shop: RV Mattress
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 3,500-lb Axle
- Shop: Replacement Dexter Bolt-On Shock Kit for 2-3/8" or 3" Diameter Axle - Single Axle
- Shop: Lippert Heavy-Duty Replacement Shock - Yellow
- Search Results: dexter bearings
- Search Results: k71~308~00
- Video: Lippert Heavy-Duty Replacement Shock Feature Review
- Video: Checking Out the Replacement Dexter Bolt-On Shock Kit for 2-3/8" or 3" Diameter Axle
- Q&A: Are Bushings And Install Hardware Included With MORryde CRE3000 Equalizers?
- Q&A: Best RV AC Unit Recommendation for 2025 Micro Winnie 2108 FBS in Arizona Heat
- Shop: Lippert Standard Replacement Shock - Black
- Q&A: Can I Use 4,000 lbs Springs to Replace 3,500 lbs Leaf Springs?
- Shop: Hydrastar Electric Over Hydraulic Actuator Adapter Module for GM Brake Controllers
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Grease Seal 12 x 2 Inch Hub After 1998 - DX72UR
- Q&A: Replacement Cushioned Equalizer Replacement for Dexter 13-143
- Q&A: Recommended Suspension Enhancements for a 2022 Grand Design Imagine 2910BH
- Shop: Suspension Enhancement
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Video: Review of the Replacement Wet Shoulder Bolt
- Video: Roadmaster Comfort Ride Shock Absorbers Install - 2025 Grand Design Influence 3503GK
- Video: Installing the Roadmaster Comfort Ride Shock Absorbers on a Venture RV SportTrek Travel Trailer
Ronald
10/7/2025
Thanks! This is for 7K axle on our 5th wheel. Here is serial number 132146068