1. Trailer Lights
  2. Peterson
  3. Tail Lights
  4. Round
  5. LED Light
  6. Red
Peterson LumenX LED Trailer Tail Light - Weatherproof - Stop, Tail, Turn - 7 Diodes - Red Lens

Peterson LumenX LED Trailer Tail Light - Weatherproof - Stop, Tail, Turn - 7 Diodes - Red Lens

Item # M826R-7
lowest price pledge
Retail:$32.40
Our Price: $18.74
You Save: 42%
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.27 lbs
Quantity: 
In Stock
Peterson LED Light Trailer Lights - M826R-7
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

4-1/4" Round. LED trailer tail light serves 3 functions: brake, tail, and turn. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug. Lowest Prices for the best trailer lights from Peterson. Peterson LumenX LED Trailer Tail Light - Weatherproof - Stop, Tail, Turn - 7 Diodes - Red Lens part number M826R-7 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (3)
  • Q & A (3)
  • Videos (2)
  • Photos
  • Why etrailer?

Peterson Trailer Lights - M826R-7

  • Tail Lights
  • Round
  • LED Light
  • Red
  • 4 Inch Diameter
  • Recessed Mount
  • Peterson
  • Stop/Turn/Tail

4-1/4" Round. LED trailer tail light serves 3 functions: brake, tail, and turn. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug.


Features:

  • Round LED trailer tail light serves 3 functions
    • Turn signal light
    • Tail light
    • Brake light
  • LumenX optics creates a solid panel of light that illuminates the entire lens
  • Skirted weld joint provides added protection against moisture
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Regulated design ensures consistent light output and prevents overheating
  • Compatible with 12V DC systems
  • Red lens over white LEDs
  • Recessed mount with grommet (426-18 - sold separately)
  • Accepts industry-standard 3-prong plug (431-491 - sold separately)
    • Locking tabs help ensure a secure connection
  • DOT compliant
    • Meets FMVSS 108 requirements for automotive lighting
  • Made in the USA


Specs:

  • Dimensions: 4-1/4" long x 1-11/16" deep
  • Diodes: 7
  • Power draw at 12V:
    • Stop/turn: 0.41 amps
    • Tail: 0.01 amps
  • Input voltage: 9V - 16V DC
  • 10-Year limited warranty


Peterson 826R-7 LumenX LED Round Trailer Tail Light Dimensions

PL-3 Wiring Connection

Optronics PL-3 Connection

This light has an industry-standard PL-3 connection as pictured above. The light accepts a 3-prong plug (sold separately).


Recessed-Mount Light

Recessed Grommet Mount Trailer Light Installation Diagram

Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.



M826R-7 Peterson LumenX LED Trailer Tail Light - Weatherproof - Stop, Tail, Turn - 7 Diodes - Round - Grommet Mount - Red Lens




California residents: click here


Video of Peterson LumenX LED Trailer Tail Light - Weatherproof - Stop, Tail, Turn - 7 Diodes - Red Lens

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Peterson LED Trailer Tail Light Review and Installation

Today we're going to be taking a look at, and showing you how to install the Peterson LED Trailer Tail Light. This light's going to give you your running light, your blinker, and your brake lights. What's great about these is that they're LED, which are really, really bright. So not only are they going to help keep you safe, they're also going to help other motorists on the road see you more clearly.The lights going to have seven diodes. What's really nice about the LED lights, you don't have to worry about any brittle filaments like you would with your traditional incandescent style lights. Not only are they going to last a lot longer, they're going to put off a more significant amount of light, and they're going to use way less power to do that.This light accepts an input of nine to 16 volts.

So this'll work great with your typical 12-volt system. The lights accept the industry standard three prong plug. If your trailer doesn't have one, you can find it on eTrader.com. In the back of the light, as you can see, we have our connection points, which do come covered dielectric grease. So that's one less thing you have to worry about during install.There actually is some raised lettering that tells you what each connection point will be used for.

I'll give you a couple measurements, and these will help you determine if this light will work with your application. It is four and a quarter inches wide, and an inch and three eighths from the end of the white to the end of the pod. I'll show you how easy it is to get these lights installed.They are designed to be used with a rubber grommet since we're replacing ours, we're just going to go ahead and put in a new grommet while we're doing that. If you need a new one, or a replacement, you can find one on etrailer.com. Now I'll show you just how easy it is to get this light installed.

Simply take our trailer wiring and feed it through the hole and just simply plug it in to the back of the light.Now sometimes these lights can be a really tight fit, so to help push it it, you can some silicone spray lubricant or just some soapy water, and that will make things a little easier. Just put it in and press, and you'll hear it pop into place. Now we can put some power to the light, make sure all the functions work. So here we have our tail lights, our turn signal, and finally, our brake lights. And if you purchased more than one light, you can repeat that same procedure for the other side.And that will do it for our look at, and installation of the Peterson LED trailer tail light..


Customer Reviews

Peterson LumenX LED Trailer Tail Light - Weatherproof - Stop, Tail, Turn - 7 Diodes - Red Lens - M826R-7

Average Customer Rating:  5.0 out of 5 stars   (3 Customer Reviews)

4-1/4" Round. LED trailer tail light serves 3 functions: brake, tail, and turn. LumenX optics creates a solid panel of light. Integrated voltage regulation. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug.

- M826R-7
by:

Quickly answered my question and included links to what I needed to order. Got confirmation, shipped soon after, arrived today. Fits and works perfectly. Thank you!



- M826R-7
by:



- M826R-7
by:

Peterson quality A+


3
3

Ask the Experts about this Peterson Trailer Lights

  • Replacing an Incandescent Peterson Light With a Peterson LED Light
    The Peterson LumenX LED Trailer Light # M826R-7 should replace your Peterson # 435800 without issue. That being said, though they are the same diameter, the grommet may not be able to be reused. I suggest also getting # 426-18 just to make sure you are covered. Both of these lights do use the standard 3 prong wiring design, so the wiring can be reused from your original setup.
    view full answer...
  • Replacement LED Trailer Light for Petersen 410-25 Light
    So what you have currently is our part # 435800 which we have a replacement LED style light for with the part # M826R-7. For an install grommet you'll then want the part # 426-18 and for a wiring harness part # 431-491 and you'd be set.
    view full answer...
    Image 1 for
  • Replacement Round LED Trailer Tail Light for a Peterson Round Tail Light
    The Peterson part number # 420-15 that you referenced is a replacement lens for the Peterson Round Trailer Tail Light # 431800 which has a 3-3/4" diameter. Although we don't have an exact match to this in LED we do have slightly larger sizes of round tail lights that come as LED. If you are wanting to go with one from Peterson then we have the LED Trailer Light # M826R-7 which has an overall diameter of 5-1/2" but the light diameter is only 4-1/4". The grommet # 426-18 and 3-prong plug...
    view full answer...

Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer lights for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joshua S
Video by:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Cole B
Installed by:
Cole B
Employee Ryan G
Installed by:
Ryan G
Employee Daron K
Edited by:
Daron K
Employee Brian T
Written by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.