See what our Experts say about this Optronics Trailer Lights

• Why is There a Driver and Passenger Round Optronics Trailer Tail/Stop/Turn Light
  The Trailer Tail Light # ST24RB is labeled as the passenger side because the driver side option, part # ST25RB, has a clear section on the underside of the housing to illuminate a license plate on a bracket like part # LP10SB. If you already have a light dedicated to the license plate then you can definitely use 2 of the passenger side options for your trailer. Attached are some review videos for you to check out. These light assemblies ground through the mounting hardware and then you...
  view full answer...
• Replacement Trailer Tail Lights for River Drift Boat Trailer
  The Peterson Round Trailer Tail Light, 2 Stud Mounting, Right Hand # 431800 and # 432000 or the 4-3/8" Round Trailer Tail Light, Stud Mount, 3-Function, Right Hand # ST24RB and # ST25RB are both the style you are seeking but are not submersible. They are good for weather, but not for launching a boat as you referenced. I have linked the page to your options for a round light that is submersible but they won't have the 2 stud mount your referenced.
  view full answer...
  
• How Many Functions Can the 7 inch Round Transit Stop and Tail Light # ST90RB Do
  This 7 inch Round Transit Stop and Tail Light # ST90RB can do stop and turn signals when used on a combined stop/turn circuit, but it cannot do taillight functions as well. The closest thing to a 7 inch 3 function trailer light we have is the 4-3/8 inch Round Trailer Tail Light, Stud Mount, 3-Function Trailer Light # ST24RB. However, this light is only 4-3/8 inches in diameter.
  view full answer...
• Does 7 Inch Round Transit Light, # ST90RB, Have Brake, Turn, and Tail Light Functions
  The 7 Inch Round Transit Light, # ST90RB, is a 2-function light. This round red transit light is used as a stop and tail light when connected to combined stop/turn circuit. For stop, tail, and turn lights, you will need a 3-function light like # ST24RB.
  view full answer...
• How Does the Optronics 3-Function Tail Light Provide 3 Functions if There are Only 2 Wires
  The Round Trailer Tail Light # ST24RB grounds through the mounting studs so the two wires are all that is necessary for activating the stop/tail/turn signals of the light. The bulbs are dual intensity so each wire will control a different intensity of the bulb and then ground through the mounting studs. The stop/turn will be on one wire and the tail light will be on another. To determine if you need more lights at the rear of your vehicle you will need to consult your local laws and regulations....
  view full answer...
  
• Sealed LED Tail Lights on Trailer Do Not Illuminate But Incandescent Type Will Work
  The Optronics Submersible LED Trailer Light Kit, part # TLL9RK, provides a lifetime warranty on the the LEDs and features water-proof housings. This particular product uses two threaded stainless steel studs for mounting to your trailer and a 3-wire configuration for electrical connection to your trailer wiring. The light includes separate wires for ground (white wire), stop/turn signals (green and yellow wires) and running lights (carried on the brown wire). There are similar products...
  view full answer...
• How Do I Ground The ST24RB Tail LIght To My Trailer
  The Trailer Tail Light - Stop, Turn, Tail - Incandescent - Round - Red Lens - Passenger Side, part # ST24RB, has studs that will screw into the frame of your trailer. Those studs will act as the ground for these lights. If the lights will not mount directly to the metal frame of your trailer, you will have to add a jumper wire to ground the lights. I have included a video demo link below.
  view full answer...
• How Does the Replacement Lens for Optronics Install
  Yes, the Replacement Lens for Optronics # A24RB which is designed as a replacement for the Trailer Tail Light # ST24RB and # ST25RB does snap onto the tail light assembly.
  view full answer...
• 4 Inch Round Submersible Trailer Light Recommendation
  I have a solution for you, but the 4-3/8" Round Trailer Tail Light # ST24RB that you referenced is not submersible. The closest thing we have to what you referenced that is submersible would be the Red Flush Mounted Sealed Turn Signal # 435800.
  view full answer...
• What are the Wire Functions on an Optronics 3-Wire Pigtail
  On the Optronics 3-wire plugs the white is ground, red is turn signal/brake lights, and the black is for running lights. On your trailer green is likely the right turn signal/brake light wire, brown and tan are most likely running lights, and yellow is most likely left turn signal/brake lights. You will need to use a circuit tester such as # PTW2993 to test the wires on the trailer to confirm.
  view full answer...
• Availability of Surface Mount 4" Round Trailer Taillight That Uses 2 Studs On Back To Mount
  I have another option for you, but we do not have an LED light that mounts in the same fashion as the Trailer Tail Light - Stop, Turn, Tail - Incandescent - Round - Red Lens # ST24RB so you would not be able to install an LED light in the mount you have on your trailer. The only option would be to stick with an incandescent light like the # ST24RB. Since they are mounted inside of the can you can use two # ST24RB as you do not need the license plate light. I included a video of the #...
  view full answer...