Features to know about

Tough Roads and Heavy Use: Steel Armored Protection

When your trailer takes a beating from road debris or weather, fragile lights can’t keep up. This armored clearance and side marker light uses a heavy-duty steel housing that shields the lens and bulb from impact and corrosion. It’s built for rugged use and holds up well over time, even when exposed to dirt, rocks, or moisture during long hauls.

Keeping Moisture Out: Sealed Gasket Design

Water inside a light can ruin bulbs fast. This light uses a durable gasket that creates a weathertight seal between the housing and the trailer surface. Combined with its snap-on acrylic lens, the seal helps keep out rain, dust, and road spray—so your light keeps shining bright instead of fogging up or corroding.

Bright Coverage from Every Angle: PC-Rated Illumination

Visibility matters most when you’re towing at night or in low light. The PC rating on this 4-1/2" by 2" rectangular light means it shines out at a full 180-degree beam spread—90 degrees to either side of centerline. That wide coverage helps others see your trailer from both the front and sides, keeping you safer on the road.

Simple Replacement Fit: Standard Mounting Pattern

Replacing an old or broken light shouldn’t mean drilling new holes. With mounting holes spaced 3-7/8" apart horizontally and 13/16" vertically (center-to-center), this light lines up with standard patterns used on many trailers. The single-wire design grounds through its mounting hardware, making wiring fast and clean—no extra ground wire needed.

Reliable Incandescent Output: Serviceable 194 Bulb

This light runs on a common 194 wedge base bulb that draws 2.7 amps at 14 volts. When it eventually burns out, simply pop off the lens and replace it—no need to swap the entire fixture. It’s compatible with 12V DC systems and designed as an easy, long-term solution for dependable marker and clearance lighting.