Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
5-3/4" x 1-9/16" Oval. Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Surface mount - hardware not included. 2-Wire design. Amber LEDs. P2 rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (1759 Customer Reviews)
5-3/4" x 1-9/16" Oval. Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Surface mount - hardware not included. 2-Wire design. Amber LEDs. P2 rated.Bought these to replace all of the single wire, ground to the trailer type lights that were on my boat trailer. They are bright and work very well. For mounting hardware, an 8-32 machine screw fits just right. Something to be aware of, they say it’s a flush mount, but it’s not with the wires sticking out the back of the light. Instead of drilling a relief in my trailer, I opted to use some aluminum cable stops as standoffs. See pictures to further explain. Worked great in the end. These are quite bright for marker lights and and perfect for what I wanted. ETrailer has prompt shipping as usual.
I found the exact replacement side light to match my custom trailer, reasonable price and quick shipping
Quick shipping - great product.
These are sharp looking lights that are super bright. Looking forward to seeing how they hold up to water.
These guys are BRIGHT; I ordered these (amber and red) to replace the lights on my trailer. They are very easy to install; no worry about which wire is the "hot" wire and/or "ground" wire. They are so bright that I'm considering switching the tail lights to LED.
slow shipping, missing parts, it looked like the boxes got dropped kicked of a building.
Brooke M.
8/23/2022
Thank you for reaching back out. I haven sent your information along to our customer service team and they will be in touch with you to get those missing parts to you as quick as we can.
I just got a new truck and I had a different version of these lights on my old truck for many trouble free years so I picked these for the new one, they are exactly as shown, seem to be of nice quality and are quite bright for a reasonable price, what more could I ask for?
LIGHTS ARE FINE. NOT HAPPY WITH TIME FRAME AND SHIPPING. ORDERED ON SATURDAY BY NOON, FINALLY SHIPPED WED MORNING AND SHOWED UP FRIDAY AT MY SHOP. OPENED BOX I ORDERED 24 TOTAL AND THE LIGHTS, PACKAGES AND OUTTER RINGS WERE JUST ALL IN BOX NOT TOGETHER.
Excellent product.
Great product, customer service is the best!
Fast shipping, lights easy install, look great
Super bright!! Love it!!
SOLID. SEALS WELL. BRIGHT AS LISTED
An excellent looking marker light. Looks very good.
The size was right, and the brightness of the LED light, let's people know there is a trailer in front of them, especially when braking, or making a turn
Much brighter than my previous tail lights. Easy to install. Would definitely buy again!
These side markers (both red and amber LED) are great for my 12' trailer. They have 3 LEDs (you can also get 4), and their size is perfect for a small trailer. The LED's are really bright, not only at night, but also during the day, so they are easily seen. I especially like the fact that they are sealed, so there should be no water intrusion problems in the future. I have included a few pictures, the first showing the round LED brake/turn/running/reverse lights (that I had purchased earlier from etrailer) with the red side marker mounted vertically on the outside. The second shows a side view of the red side marker light, and the 3rd picture shows the side marker mounted to a small piece of 1" X 1" x 1/8" aluminum angle which I painted black to match the mounting frame of the round LED lights. I mounted the LED side marker to one leg of the aluminum angle, then mounted the other leg with 1" standoffs to two holes already present on the black mounting frame of the round LED light. Although all the lights are sealed against water intrusion, I decided to mount them on each side of the trailer at the top of 2 PVC pipes, about 36" long each, where the lights would not be exposed to immersing in water when launching/retrieving a boat.
I installed these lights in a T@B teardrop camping trailer. The grommet would not work on this style trailer so I installed the lights using a silicone adhesive the same as the original Peterson lights. eTrailer delivered them in the same timely manner I have come to expect from them and the LEDs were easy to install. These lights are blindingly bright - simply amazing. I had rear lights with 1157 bulbs which I had upgraded to 2357 bulbs and equipped the tow vehicle with a powered converter but the light output was dim by today's standards. These lights are twice as bright on running lights and about 4 times brighter on the brake/turn signal elements. The thing we all fear when towing is being hit from behind by a driver that does not see our running, brake or turn signal lights in time. I know these lights will vastly improve the safety and visibility of our trailer. Thanks!
love etrailer. They are fantastic!
Great little lights, and very bright as well. They have been installed on a trailer and submerged many times since installed, and still work great!! Can't beat LED's for brightness and, hopefully, longevity!!! Attached is one picture of the overall trailer, and a closeup of the amber side light. I also have 2 red sidelights that are mounted above water at the rear of the trailer, and they are still working great as well.
Looks and works way better than the factory lights on my Thule Transporter Combi.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David
10/31/2018
They are still looking great. The only complaint is with the manufacturer of my trailer they drill a 1 inch hole in the sides to mount the original lights. This has become a leak waiting to happen around three of the replacement lights, beware of the size your covering...