Which Wire is the Ground Wire on Optronics Trailer Light # MCL19CRB
Published 07/29/2011
Question:
description says one of the two wires coming out of the light is a ground wire, both are yellow. how do I tell which wire is the ground wire? Thanks
asked by: John
0
Expert Reply:
On the Optronics Trailer Light, part # MCL19CRB, you can use either wire for the ground. As long as one is wired to power and the other to ground the light will work.
expert reply by:
Jeff D
0
Product Page this Question was Asked From
Miro-Flex LED Clearance or Side Maker Light w/ Chrome Bezel - Submersible - 4 Diodes - Clear Lens
- Trailer Lights
- Clearance Lights
- Marker
- Oval
- Surface Mount
- Submersible Lights
- LED Light
- 5-3/4L x 1-9/16W Inch
- Amber
- Optronics
more information >
Continue Researching
- Q&A: Options For Replacing An Elixir ELX-60 Converter
- Q&A: Optronics MCL19CAB Clearance LIght Recommendation for Trailer
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between 1.25 Inch Trailer Bearings
- Q&A: Replacement for Atwood 82543 Surge Brake Actuator
- Q&A: Surge Brake Actuator to Replace Atwood 82543
- Q&A: Troubleshooting Dexter Brake Actuator K71-651 Keeping Brakes On
- Q&A: Is the GloLight M1 LED Clearance or Side Marker Light Reflective
- Article: Trailer Lighting Requirements
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)