Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
4-3/16" x 1-3/8" Oval. Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Surface mount - hardware not included. 2-Wire design. P2 rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Here we have Optronics Sealed Miro-Flex, Mini Star LED Side Marker Light, part number MCL17AB. The light is a sealed, waterproof unit, so it is fine to use on boat or jet ski trailers. It mounts to the surface of your trailer and has a snap-on chrome cover. There are 3 amber LEDs that draw a total of .047 amps at 12.8 volts. The LEDs are also covered by a lifetime warranty from Optronics. Next, we will hook up the light to a power supply so you can see how it looks. We will take one of our wire leads and connect it to our ground and the other we will connect to our power. Next, we will turn off the overhead lights, so you can see how bright the light is. And there you have it for the Optronics Sealed Miro-Flex, Mini Star Side Marker Light, part number MCL17AB.
Average Customer Rating: 4.8 out of 5 stars (1769 Customer Reviews)
4-3/16" x 1-3/8" Oval. Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Surface mount - hardware not included. 2-Wire design. P2 rated.Nice lights once you get them installed-They are bright and look nice on the 1970 Sears boat trailer.
The wires that come out the back need a 3/4" hole to fit through-so I had to drill a 3/4" hole in the trailer plus the 2 mounting screws holes.
I had as much $ in drill bits as I did with the lights
Shipping was fast, lights were easy to install and look great, really bright at night. The "bling" to top off paint-n-seal update we are in the process of doing on our 1983 travel trailer. The new LED's make the camper look good, friends thought we got a new one. Highly recommend them.
Though I have not hooked up yet…the lamps are an exact replacement for my Toyhauler. Gaskets or screws do not come with these lamps, though there should be a gasket with them. I have material and will make my own (see photo’s).
etrailer does well with follow up email/s along with your order/s. I’ve had no issues with any previous orders as well. Shipping took about a week through USPS.
ds
love etrailer. They are fantastic!
Order was correct and filled quickly.
Fast and just what I have been looking for
These were an exact match for my XLR Hyperlite Toy Hauler. I had one light that was leaking behind it into my front cap. I destroyed the original lights on the trailer trying to get the chrome trim ring off, so I purchased two more from etrailer. It was an exact match. For those wanting to know, there is 16 gauge stranded wire leads on these lights. I couldn't find that anywhere. I installed these with butyl tape behind them and some clear outdoor silicone.
Super efficient.
Everything was good except one of the lights was missing the chrome bezel. Because I was replacing lights I used one of the older bezel.
Vary good quality
Received both lights, but only 1 chrome bezel. I'm hoping they will send the missing piece.
Jenny N.
7/15/2023
Oh my goodness! We will have it sent right out for you. Customer Service will contact you.
Still look good as new great lights
So far so good. They came in yesterday, going to try and make time to get them put in this weekend if weather cooperates. Looks just like what is on my Rig now.
The LED marker lights I ordered look great so here is what I did with them.
This style of light is in my Forest River Toy Hauler. Dealer didn't stock them so ordered it from etrailer. Also ordered a couple of spares in the red and yellow lens. Light was exactly like the unit I needed to replace on my Toy Hauler. Took me about five minutes to install and works perfectly.
Still working good!
I would like to point out that a follow up after a year or 6 months on a product is much more valid and useful to me then someone asking for a review when a product is first purchased. I have purchased a few items from etrailer.com over the last 2 or 3 years and have been completely satisfied!
Matched existing lights perfectly.
Good product fast and easy shipping this is the second time I’ve bought from e-trailer and will buy again
Great service and delivered 3 days early!
Have ordered parts from etrailer several times and ALWAYS had good results
The parts I ordered this time was cheaper than ANY other web site and fast delivery
I live in rural Montana so can't get some parts local
I recommend etrailer every time
Exact match 2018 Tiffin open road running lights
These were a perfect match to the ones that failed on my 2014 Tiffin Open Road, very happy
The clearance are fine; they were an exact dupe of what I had... so I expect them to hold up like the ones I removed... the bezels are a chrome plated over plastic... they should do the trick!
It might be possible to give 5 stars but after purchasing all the products about a year ago, my little fiberglass trailer is not even close to being ready. All the lighting is hooked up and they all seem to work, so that's a good thing. The other products that I purchased have not been installed yet.
I would like to mention how pleased I am with e-trailer videos showing everyone how their products look and how they're used. Keep it up, I am a happy customer.
Vic
Shipping was frustrating! First time the product got lost and second time it took over two weeks to get the lights to Canada.
Maybe offer expedited shipping that would help.
Product is exactly as shown.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Randall
3/10/2024
Exact replacement. Still going strong.