If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. SeeLeveL sensors track 2 holding tanks with single-digit accuracy at the monitor. Also displays battery voltage and includes water pump switch.
Features:
Specs:
Note: SeeLeveL tank monitoring systems are not compatible with metal tanks.
Traditional tank monitors have a reputation for being unreliable. Only a few sensors are installed inside, meaning that they usually only measure in quarter increments and can send false readings if they get dirty. When you're keeping an eye on how much fresh water you have, the difference between 25% full and empty means a lot, and that inaccuracy can be a problem.
The SeeLeveL tank monitoring system uses technology that can sense fluid levels from the outside of the tank. The sensors' flexible circuit board sticks in place and measures along its entire height. This makes it accurate in single-digit increments.
California residents: click here
Grreat solution to tank reading
Love it!
Awesome product!!! Now I can really see how full each of my tanks are!
These sensors are so much better than the internal probes because they don’t get gunk on them. You can set the sensors on the outside and the positions that you want and it reads by percentage. I would definitely buy them again.
It is a Christmas present so I haven’t opened it yet.
I still have not managed to install the sensors. The side walls of the gray and black tanks are stepped, making the installation of the sensor strips a bit more complicated (vs, tanks with vertical side walls). Also I'm a little hesitant about how to connect the wiring.
I think (hope) it will be great when I'm done, but the process is more complicated than I expected.
The installation of these tank level sensors was straight forward. The video from Garnet Instruments was very helpful. I had to order a cable from FireFly Integrations to connect the 709 panel into the CAN bus system in my RV. My tank readings are now more accurate and not subject to interference from debris inside my tanks. Very happy with this product.
Work great, seem to be accurate
Works just like it is supposed to
Great product. They work very well.
Would purchase again.
Package arrived ahead of schedule - thanks.
We’ll have the see Level system installed by professionals.
All appears to be good.
Good
Follow through and was kept up to date on delivery. Satisfied
Much easier to install than I expected. My fresh tank is surrounded by a metal shroud and required peeling half of the paper back and sneaking the sensor over the top, aligning the top to the sensor with the tank and pressing it in place through a wiring hole. then grabbing a corner of the paper and pulling it the rest of the way out. It sounds tricky but while the adhesive feels very secure it wasn't grabby. I could lightly lay an edge in place and still reposition. I don't think you could safely reposition if a large area stuck. The metal shroud is less than an inch from the sensor and it is working great, (many warnings in the instructions about keeping metal away, (These work on capacitance so a piece of metal can influence the sensor) The black and gray had to go on the ends because there wasn't room between the support rail the tanks hang from and the tank for the sensor to fit. You have to download instructions but really all you need to know is all of the sensor blue wires connect together with the blue line on the monitor and the black lines on the sensors can ground to the frame or I just wired them all together with the black ground on the monitor (and grounded that) And the red is 12 V positive. The white connects to the pump positive at the switch to light the monitor panel led. I have a 24V water pump and it didn't like it so I don't have the led. The switch is a SPDT so it can be wired with another 3 way switch to allow controlling the pump from two locations, or not.
An excellent system! Simple reason: designed and Made in Canada! To date, "etrailer" was a great source for the various items required for our production line and we did not mind buying a Canadian product in the US. But obviously, in light of recent political events, this practice is no longer logical nor viable. Canadian RV folks and Vanlifers, take note. This item, and most of the others, are available in Canada.
We put the SeeLeveL system in our camper van about a year ago, and it has been a game changer for us. Before installing the system we only had a visual check on water level, by looking at part of the tank under the seat bench in the back of the van. It was inconvenient and because the tank is only semi-translucent, not always very accurate. The monitoring system remedied that. In addition, I can now monitor tank level while filling the tank by watching percent full from the back of the van... filling the tank used to be a two-person job. Finally, we have a 5 gallon gray water tank under the sink... we attached one of the sensors to the gray water tank, epoxied it for extra support, and wired the sensor to the system using flat electrical connectors so that it can be easily removed from the van for disposal of the gray water. It works like a charm, enabling us to monitor both fresh and gray water in the van. It was a simple installation, and I highly recommend the product.
Do you have a question about this Smart RV?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.