2-1/2" Diameter beehive. Waterproof, LED trailer light serves as a clearance or side marker light when properly mounted. Durable polycarbonate housing. Mounts to trailer with grommet (not included). Accepts standard 2-prong plug. P2 rated.
Features:
Specs:
Manufacturer Cross Reference
Light will work as an exact replacement for:
Uni Bond # LED7250R
Truck Lite # 10276R
Grote # 47222
Maxxima # M10201R
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we are going to take a look at Optronics sealed beehive LED trailer clearance and side marker light, part number MCL23RB. The lens of this light is sealed and waterproofed against the housing. Inside are eight LEDs that draw a total of 0.051 amps at 12.8 volts. It is designed to mount to your trailer using a 2-1/2 inch mounting grommet. And you will also need a two-wire plug to connect to the connection points at the back. Next we are going to hook the light up to a power supply so you can see how it looks. We will connect one of the contacts to our ground and the other to our power. Next we will turn off the overhead lights so you can see how bright the light is. And that does it for Optronics sealed beehive LED trailer clearance and side marker light, part number MCL23RB.
Average Customer Rating: 4.7 out of 5 stars (80 Customer Reviews)
2-1/2" Diameter beehive. Waterproof, LED trailer light serves as a clearance or side marker light when properly mounted. Durable polycarbonate housing. Mounts to trailer with grommet (not included). Accepts standard 2-prong plug. P2 rated.
They were the exact replacement (I had to reorder to get the correct size, my fault).
Had flush mount clearance lights on back of my trailer and couldn’t see where the back of trailer was at night, put these on and no problem seeing where the end of the trailer is now. They fit as they should and brightness is perfect.
While stripping paint from my 1948 trailer the stripping product damaged the running lights on the trailer. The new light quickly arrived from etrailer and were easily adapted to my vintage trailer. Here's a picture of the trailer with the new lights toward the front. Thanks!
Matches the broken one on my Trailer. It is a little bit hard to install, but worked out just fine.
Easy ordering! Quick shipping! Received my order today! Just as I ordered! Thank you for great service and follow-up !
Bright plug right in fits dimension as said. Good product
photos of finished projectslights installed
these are NOT bright at all you cannot see the light is on unless you're coming at it from the full front on Ie. Facing it. the Leds don't light up the full amber lens. waste of my money
etrailer ,
I inherited two old boats with trailers that need a lot of work. You guys had everything I needed. Delivered on time in great shape. Great price, awesome help desk. You made me feel like I wanted to give you my money just because.
Now, THAT is called customer delight, not customer service.
Thanks again,
Gary D.
I wanted to replace my incandescent lights with LEDs, for the rear sides I went with the beehive style now I can see the rear corners of my trailer.
These lights are good quality and look great.
Don't be fooled by the cheap knock offs out there.
I bought this thinking it would replace the vintage lens on my 1949 Kampmaster camper. It is not just the lens but has a light built into it. It is a sealed unit. I was able to modify it to make it work.Quality seems good. Price was good.
Fit perfect
Quality Product fit as a replacement with out any changes to vehicle wiring and mounting hole Will use this company again for other products
Perfect replacement fit. But better than that was the help I received from etrailer to find the exact replacement lights I needed. A big Thank You for that!
These look great, and are of very high quality.
CAUTION: No where in the description does it indicate that these DO NOT include any way of mounting them. If you don't have an existing mounting bracket and pigtail (as was my case) they arrive and then you realize you can't get your project done because you need more parts.
Get the parts you need, and these are great.
These really look great!
CAUTION: Nowhere in the description does it indicate that these come with NO WAY of mounting them. If you don't have an existing mounting bracket and pigtail (as was my case) they arrive and then you realize you can't get your project done because you lack parts.
Get the parts you need, and these are great!
Good product at a good price. Replaced my regular lights with LED lights from etrailer.com. Much brighter with less power draw. happy with purchase.
Repeat customer here and always satisfied with product quality, prices and fast shipping. The side marker lights I ordered were exact fit for my snowmobile trailer. Thanks again!
Fast delivery and exactly what I ordered. Haven't had time to replace my broken bulb yet but I'm 99% sure it's the one I need. Excellent service and product.
Good looking marker lights for my Cardinal travel trailer. With the 2" grommet this will look wonderful.
etrailer was fast on shipping and answered questions I had! Will buy from them again
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.