Availability of Tear-Shaped Trailer Clearance Lights in Red and Amber Colors

Question

Question:

I want to get your tear light se but I need the amber and red also Do you have them in red or do you just have the lenses in red and amber I need 5 of each color

asked by: Vickie D

0

Expert Reply:

For a red-lens tear-shape clearance light you can use Optronics # CB22RB or the LED version # CBL22RB. Both lights are submersible. For amber lights you can use either incandescent type # CB22AB or LED-type # CBL22AB. Hardware is not included.

expert reply by: Adam R

0

Answer 1

Yes, the Optronics LED Trailer Clearance or Truck Cab Light part #CBL22AB does come with a thick foam mounting gasket which I have pointed out for you in the attached photo.

view full answer...

Answer 2

The Truck Clearance and Cab Marker Light - Incandescent - Triangle - Amber Lens #CB22AB is a sealed light so there is not a replacement bulb option. Since you want a LED option, I recommend the LED Trailer Clearance or Truck Cab Light - Submersible -…

view full answer...

Answer 3

The Optronics LED Trailer Clearance or Truck Cab Light - Submersible - 15 Diodes - Triangle - Amber Lens item #CBL22AB does not come with the mounting hardware. I have attached a diagram showing the dimensions of the lights and the mounting holes. We…

view full answer...

Answer 4

Although we don't have any specifics for the lights on your 2009 Fleetwood Icon 24A I may have found a solution for you. We do have a selection of cab/clearance lights that are shaped at an angle like what it looks like on your Fleetwood. The…

view full answer...

Answer 5

I think I have the perfect light for you. Take a look at the LED amber clearance light #MCL49AB. This light has 14 diodes so it will be bright and you can see it straight on and from an angle. I have included a link to a video review of this light…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

Hi Arthur, I took a look at your list of parts to flat tow your 2026 Jeep Wrangler Rubicon and it looks like you have almost everything you need! For the Blue Ox Patriot Supplemental Braking System part #BLU37TR, it plugs directly into a 12V outlet…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

Hey Jeff. We've got a couple of options to add a Jerry Can holder to your 2024 Jeep Wrangler JL. They are the MORryde Jerry Can Mount for Jeep Wrangler JL - Driver Side item #MR27UR and Passenger Side item #MR87UR. These mount forward of your…

view full answer...

Availability of Tear-Shaped Trailer Clearance Lights in Red and Amber Colors

Products Featured in This Question

Continue Researching