1. Trailer Jack
  2. etrailer
  3. Side Frame Mount Jack
  4. 3000 lbs
  5. Topwind Jack
  6. Drop Leg
Square Direct Weld Jack w/ Footplate - Drop Leg - Topwind - 29-1/4" Lift - 3,000 lbs

Square Direct Weld Jack w/ Footplate - Drop Leg - Topwind - 29-1/4" Lift - 3,000 lbs

Item # TJD-5000
lowest price pledge
Retail:$47.70
Our Price: $44.04
You Save: 8%
Trailer Jack
Orders above $99 qualify for Free Shipping
Shipping Weight: 19 lbs
Quantity: 
In Stock
TJD-5000 - 3000 lbs etrailer Trailer Jack
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Weld-on jack has a retracted height of 24" and an extended height of 39-1/2". The square design provides superior side-load support. Drop leg offers 13-3/4" of lift on top of 15-1/2" of screw travel. Foldaway handle included. Lowest Prices for the best trailer jack from etrailer. Square Direct Weld Jack w/ Footplate - Drop Leg - Topwind - 29-1/4" Lift - 3,000 lbs part number TJD-5000 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (11)
  • Q & A (3)
  • Videos (1)
  • Photos
  • Why etrailer?

etrailer Trailer Jack - TJD-5000

  • Side Frame Mount Jack
  • 3000 lbs
  • Topwind Jack
  • Drop Leg
  • Weld-On
  • etrailer
  • Fixed Mount Jack
  • 29 Inch Lift
  • With Foot

Weld-on jack has a retracted height of 24" and an extended height of 39-1/2". The square design provides superior side-load support. Drop leg offers 13-3/4" of lift on top of 15-1/2" of screw travel. Foldaway handle included.


Features:

  • Utility jack lets you raise and lower your trailer
    • Ideal for agricultural and commercial applications
  • Square jack provides more side-load capacity than round-tube jacks
  • Topwind handle has claw grip for comfortable, easy cranking
    • Easily folds away for storage
  • Drop leg allows for increased lift and saves time when raising or lowering
    • Pin and clip holds leg at desired location
  • Effortless greasing with built-in grease zerk
  • Black painted outer tube
  • Zinc finished inner tube, footplate, and handle for corrosion resistance
  • Welded-on footplate minimizes sinking in soft ground
  • Weld-on installation


Specs:

  • Height (from bottom of foot to top of handle mount):
    • 24" Retracted
    • 39-1/2" Extended
  • Total lift: 29-1/4"
    • Screw travel: 15-1/2"
    • Drop leg travel: 13-3/4"
  • Lift capacity: 3,000 lbs
  • Support capacity: 5,000 lbs
  • Outer tube width: 2-1/4"
  • Inner tube width: 2"
  • Footplate dimensions: 7-1/2" long x 3-3/4" wide
  • Handle radius: 9-5/8"
  • Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole
    • 3-1/2" Between center of hole on bottom and center of nearest hole
  • 1-Year warranty


Ram DimsRam Dims

TJD-5000 Ram Square Direct Weld Jack w/ Foot Plate - Drop Leg - Top Wind - 15-1/2" Screw Travel - 3,000 lbs





Video of Square Direct Weld Jack w/ Footplate - Drop Leg - Topwind - 29-1/4" Lift - 3,000 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for etrailer Trailer Jack - Side Frame Mount Jack - TJD-5000 Review

Today we're going to be taking a look at a square direct weld jack with the included foot plate and this one also includes a drop leg. This utility jack is going to let you raise and lower your trailer. The square jack provides more side load capacity when compared to round tube jacks. This jack is going to feature a lift capacity of 3000 pounds and a support capacity of 5000 pounds. You can see here on top that it has a top wand handle and it has a claw grip that is going to allow for nice, comfortable easy cranking, and another neat feature about the handle is when it's not being used it conveniently folds over into a stowed position. So it's a really nice design of this particular handle mechanism. Now, the handle radius, if we take a measurement from the center of where it mounts to the outer edge of the handle, that's going to give us a measurement of 9 and 5/8 of an inch, that's our handle radius. Again this jack is a direct weld-on installation, meaning it's going to weld directly onto the frame of the trailer. Now I also want to mention that this jack features a drop leg.

A drop leg is going to allow for increased lift, and it is going to save time when raising or lowering the jack. The pin and clip down here is what holds the drop leg in position at the desired location. So if we pull the pin. I am going to go ahead and take the drop leg out, so you can see all of it. So right here is our drop leg. Now this is going to have a five hole design.

It's going to offer an additional 13 and 1/2 inches of travel apart from the jack. So measuring from the center of that hole to the center of this hole, that is going to be 13 and 1/2 inches, and then it's going to be able to adjust in increments of about 3 and 3/8 of an inch. That's going to be the distance that we have center on center between the drop leg holes. Also want to point out that here on the inner tube it's going to feature a hole located on each side. That way you can re-position the drop leg to change the direction of the foot plate. Now the jack also allows for easy maintenance. Right here you are going to notice the included grease Zerk fitting.

That is going to allow you to attach your grease gun pump and your grease and lubricate the internal components. The jack is going to be constructed from a steel construction. Here on the outer tube we're looking at a black powder coat finish. And then everything else is going to have a nice, clear zinc finish on it. So overall the unit is going to do a great job at resisting rust and corrosion. The foot plate is going to be welded to the bottom of the drop plate.

That is going to give us a width measurement of 3 and 3/4 of an inch and a length measurement of about 7 and 1/2 inches. That's a really nice size. That's going to do a great job at spreading out the applied weight, especially on softer ground, that's really going to help prevent sinking. It also increases overall stability. Now another thing I want to point out is when we take a look at the overall height, I'm going to measure from the bottom of the foot plate to the top of the handle mount. That is this right here. So right now the jack is in a fully retracted position. So you can see how easy it is to operate. I don't feel any kinking or binding. Nice fluid design. And again that claw grip really does make for easy comfortable gripping when it comes to raising and lowering and cranking the jack. So nice overall design. Fully retracted this is going to give us a retracted height measuring from the bottom of the foot plate to the top of the handle mount of about 24 inches. Now I did this same measurement with the jack fully extended and that increases to 39 and 1/2 inches, so this jack is going to offer 15 and 1/2 inches of travel and then again you are going to have the additional 13 and 1/2 inches of travel of the drop leg and that can adjust in 3 and 3/8 of an inch increments when it comes at 13 and 1/2 inch drop leg travel. Outer tube of the unit is going to be a square design. That is going to give us a measurement of 2 and 1/4 by 2 and 1/4. The inner tube, square design as well, that's going to be 2 inches by 2 inches. That's going to do it for today's look at the square direct weld jack with the included foot plate as well as the drop leg. Again, it's going to have a lift capacity of 3000 pounds and a support capacity of 5000 pounds.


Customer Reviews

Square Direct Weld Jack w/ Footplate - Drop Leg - Topwind - 29-1/4" Lift - 3,000 lbs - TJD-5000

Average Customer Rating:  5.0 out of 5 stars   (11 Customer Reviews)

Weld-on jack has a retracted height of 24" and an extended height of 39-1/2". The square design provides superior side-load support. Drop leg offers 13-3/4" of lift on top of 15-1/2" of screw travel. Foldaway handle included.

- TJD-5000
by:

This is a nice quality product. I will definitely buy more. 649623



- TJD-5000
by:

built a trailer with parts from etrailer.com over a weekend - everything worked out. My wife's garden can now be watered. 396222



- TJD-5000
by:

I'm very happy with these drop leg Jacks. Every trailer I own has a drop leg Jack. These are smooth operating and built well in my opinion. Thanks for the affordable product. 519902


Comments
I bought 2 of these jacks last year and have been completely happy with them this whole time. The leg is a huge time saver. Both Jacks work and look like they are brand new and have been outside in the elements this whole time Ive owned them.
Jordan - 06/09/2019

56373

- TJD-5000
by:

All the parts have great quality. Haven't gotten to building the trailer as yet! 796238



- TJD-5000
by:

quality jack with a great price. the saying, you get what you pay for, is in question here. this is one time i got more than i paid for. 462317



- TJD-5000
by:

great products...great job in the shipping dept. 412525



- TJD-5000
by:

Very quick dilivery. Easy to find parts needed. Will order again. 394107



- TJD-5000
by:

Quick delivery 382872



- TJD-5000
by:

Love the product. Not sheep looking or made. It is a out standing product and will be buying a lot more 343175



- TJD-5000
by:

Great. Solid build 341611



- TJD-5000
by:

so far so good, i used u bolts across the trailer to bolt it, my trailer is aluminum, and i needed it to be snug up against the tongue to clear the equalizer bars 247018


11
11

Ask the Experts about this etrailer Trailer Jack

  • Trailer Jacks That Can be Welded to Sides of Trailer For Increased Stability
    We have close to exactly what you need, although a direct-weld jack such as the Square Direct Weld Jack # TJD-5000 you referenced will not be able to flip up, it will need to remain vertical where it is welded. If you are okay with that then a pair of these jacks will work great for stability so the front of your trailer doesn't pop up and the hitch ball become detached (assuming you do not exceed the 10,000 lb support capacity a pair of these jacks will give you). If you do need something...
    view full answer...
  • How Much Clearance Is Needed to Use the Square Direct Weld Jack w/ Footplate
    The clearance measurement you are referring to is largely going to depend on where you weld the outer tube of the Square Direct Weld Jack w/ Footplate part # TJD-5000 to your bumper. However, I can confirm that while the jack is completely retracted, the distance from the bottom of the outer tube to the bottom of the foot plate will be 2-1/2". Therefore, if you were to align the bottom of the outer tube on the jack with the bottom of your bumper you would only need 2-1/2" of clearance....
    view full answer...
  • Replacement Top Wind A-Frame Trailer Jack Options for a 16 Foot Camping Trailer
    We have oodles of jacks like the one in your picture suc has # BD155032. I have included a link to them for you. The mounting pattern is an industry standard so you won't have to weld a new jack on. What you will want to look at is the capacity, outer tube diameter, lift amount, and the retracted height. Most jacks have an outer tube diameter of 2-1/4 inches but there are some that are different. Some of the options is the link have feet or a wheel and some do not and there are numerous...
    view full answer...

Do you have a question about this Trailer Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Updated by:
Lindsey S
Updated by:
Ronnie R
Updated by:
Hannah L
Updated by:
Mike S
Expert Research:
Michael H
Installed by:
Cole B
Written by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.