bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class II
  4. 1-1/4 Inch Hitch
  5. 3500 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Item # 36416
Retail:$339.92
Our Price: $189.85
You Save: $150.07
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 35 lbs
Quantity: 
In Stock
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" Class II 36416
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number 36416 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (205)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 36416

  • Class II
  • 1-1/4 Inch Hitch
  • 3500 lbs GTW
  • Concealed Cross Tube
  • Draw-Tite
  • 300 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 300 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



36416 Draw-Tite Class 2 Trailer Hitch Receiver

90152 Hidden Hitch Class 2 Trailer Hitch Receiver

Installation Details 36416 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36416

Average Customer Rating:  4.8 out of 5 stars   (205 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:

Hitch is a great fit for our vehicle, however, the unit was not packed or shipped with much care. The hitch was delivered with large scratches and pretty banged up because it was placed very loose in the box. I have bought maybe 4 hitches through etrailer and this is the first time an item was sent with such lack of detail (at least that I can remember.) Hope this is not the standard for the future.


Comments
I will have our customer service team reach out to you. I recommend touching up the affected places on the hitch with a rust resistant paint. This will help to prevent rust and also you will have it on hand for regular hitch maintenance.
-- Etrailer Expert Jenny N - 02/28/2022


by:
2008 Lexus ES 350

Shipped quicker then expected. Easy install. Fits perfect.




by:
2011 Toyota Camry

The hitch was exactly as ordered and fit perfectly. It is sturdy and a great value. It arrived quickly to CA. I really liked the videos and reviews on the site which gave me ideas and a sense of knowing I was installing everything correctly. I, like most of us, do not have access to a lift, but I used the ramps I have for oil changes on our cars. I just backed up on them and and chocked the front wheels. I also do not have lifting help and I am 71 so I set the hitch on a floor jack and my wife raised it up as I guided it in behind the bumper cover. I read a review that said he was able to install without dropping the muffler, and I did the same. Thanks for that tip, it was easy. Our Camry had weld nuts on both sides, maybe because it is one of the early 2011 models, which made it very easy. Let me say that I can see the muffler drop if you are using power tools. But if you are using good old had tools it really is not necessary. Another comment about the reviews. One review expressed concern over ware on the spare from the added bolts and the fact of permanently removing a factory bracket. This must have been a brother of mine as I had the same thoughts when I viewed the installation video before ordering. If you have a "donut" spare, like most, with it in the well look through the center hub with a flash light, the added bolts and plates are inside the rim area and never contact the actual tire. The second concern of the bracket removal, after looking at what it was bolted to, and where the added hitch, which is much stronger, is secured, I have no concerns the the bracket is now needed. After clearing the trunk, getting the tools together, and backing on the ramps. From start to final torque down of the bolts it was right at an hour. Note: My wife was very pleased with the hidden appearance of this hitch on "her" car. Always a success when the wife is happy. I recommend this model hitch and ETrailer and will refer friends.




by:
2011 Toyota Camry

Product arrived scratched and scuffed up. Box had several holes in it and and was tore up, even the hitch was protruding out. I have yet to check fitment, but if it lines up I'll definitely have to spray a coat of primer/paint on it to prevent rusting at least where the scratches are. I'm assuming this happened during shipping and I didn't just receive an old returned product.
The hitch itself had this unusual thick coating of dust on it like it had been sitting for a long time. The welds on it are sloppy and uneven, I really hope they hold up, granted it's only a 300lb tongue rating.
On the flip side, the hardware seems to all be there, unlike some other reviews that stated it was missing. First time customer for etrailer, so I guess I was expecting much more quality.


Comments
I am so sorry your hitch is not the quality you expected. I will send this issue to customer service.
-- Etrailer Expert Sierra K - 07/12/2022


by:
2011 Toyota Camry

Excellent product. Came with good instructions for install, does require a jack, wheel chocks, possibly jack stands, wrenches and ratchet and sockets, and a drill for bracketing thru trunk basin. Does take some time and patience especially dropping the muffler to get up and under it. The hitch itself is great. I use it for my bicycle rack. Once installed it is hidden other than the receiver. Very satisfied and glad I was able to install myself with the good instructions.




by:
2011 Toyota Camry

Installed on 2011 Camrey LE

etrailer
upgraded shipping to 3-5 day express at no charge. Hitch installed in an hour and fifteen minutes per their instructions. Completely satisfied with etrailer, purchase, and product.


Comments
I am interested in purchasing the Drawtite hitch for my 2007 Camry. I have a 2 bike rack mount so I will be using a 1 14 to 2 adapter but I also wanted to raise the rack. Will the MaxxTow Hitch Accessories - MT70355 work with this hitch on a Toyota Camry clear the bumper? Thanks, Dave
-- comment by: Dave M - 10/25/2013



by:
2010 Toyota Camry

So about a year ago I bought a reciever hitch, receiver cover,euro style ball and wiring for my 2010 Camry to tow a 4x8 foldable trailer for powersports......Installation was straight forward and dedicated an afternoon for install.....Directions for the products was easy to follow for both products.... so far the wiring is just as I installed it and the hitch is holding up great, you can barely notice that I have a hitch back there. I think it blends in nicely....I anticipate many years of worry free towing....
Customer service is top notch also ????




by:
2007 Toyota Camry

Not starting off well. Product was delivered to wrong address!
It was very heavy so needed to make additional arrangements.
The box was broken open and parts were exposed. Hopefully not parts are missing. I will let you know is any parts are damaged or missing.




by:
2007 Toyota Camry

The hitch was an easy install for one person with a floor jack, if you want more elbow room. You don't need to drop the exhaust on a Toyota Camry LE to complete the install.


Comments
Works great
Bob T - 07/07/2018


by:
2009 Toyota Camry

We recieved the package in less than a weeks time. Along with the great tutorials I was able to install the trailer hitch in 30 minutes. I have yet to tow anything, but the product seems of high quality. I will be coming back to etrailer.com for all my towing needs.




by:

I only recommend etrailer to people who want to buy a hitch receiver. Amazing videos and amazing service, plus the part installed and has worked great!




by:

The entire hitch looks very solid and well made. It was difficult to install, though. Took me a couple hours to figure out how to get it in place.


Comments
Sorry about the difficulty. We have an installation video of your year, make, and model here:
-- Etrailer Expert Sierra K - 12/27/2021


by:

Trailer hitch works great easy to install. ordered a Cargo Carrier works great for adding more room 7 space for moving


Comments
Still works GREAT!
Da L - 06/17/2021


by:

Fit was perfect. Nice and easy install.




by:

Just what I needed!!!




by:
2011 Toyota Camry

Trailer hitch was a perfect fit for the car. Instructions were easy to follow. All necessary parts were in the kit. Took a couple of hours to do the complete install. I was very happy with the website, the quick shipping, the hitch and the installation!!


Comments
I have had the hitch on the car for a year and it is working out great!
Dave C - 10/06/2017


by:
2007 Toyota Camry

I bought the hitch a year ago for a Camry we keep at a vacation home - it showed up on time and in perfect condition. I had the hitch installed by an auto repair place and the guy who installed it told me it was manufactured to fit the car, exactly. We attach a bike-rake to it and it works like a charm.


Comments
A year later, the hitch works great and has caused us no trouble at all.
S. D - 10/19/2018


by:
2011 Toyota Camry

I just finished installing the trailer hitch I bought from eTrailer.com and it went on perfectly. Everything was as described in the video and the installation could not be better. Absolutely perfect online purchase experience. Thank you for a great product and quick shipping.


Comments
Still pleased with quality and performance of the hitch. Went on easily, fit perfectly, solid unit.
John - 05/03/2018


by:
2010 Toyota Camry

Install video was great! Product was exactly as advertised! Great price for a well built hitch! Very easy install (took 45 minutes) on my 2010 Camry! Arrived at my home in a short time! If I need another hitch in the future, I will definately come back to etrailer!!! I HIGHLY recommend this product and this company !!!!!!!!!!!!


Comments
Have owned and used this hitch for over a year now. Still VERY happy with my ion. Last April we pulled a small trailer from Ohio to Arizona and back with my 2010 Toyota Camry. No problems whatsoever. No bumping or thumping from loose hardware or faulty construction. I am VERY confident that this is the best product for the money.
Marc - 04/02/2014


by:
2011 Toyota Camry

the box arrived in pretty bad shape. however the receiver was undamaged and was installed at work in the parking lot during my lunch hour, I needed a 2nd pair of hands for less than 5 minutes. very happy with every aspect off this receiver, my only suggestion would be to offer it with a 2'' receiver option as there are more accessories available in that configuration and you wouldn't have to deal with any adapters


Comments
been a year and no complaints, the finish has held with no rust appearing anywhere. very satisfied [still wish it was available in 2 ]
Jim - 03/14/2020


by:

The hitch was for a 2007 Toyota Camry. The installation was easy after watching the videos on how to install it. It requires drilling a couple of holes in the tire compartment but following the instructions carefully and sealed everything well and everything is just fine. I recommend this product for anyone because the installation is really easy.


Comments
The hitch still hanging in there. I had no issues with it and I am very satisfied with this product. I am considering buying one more for my second car.
Rene A - 12/17/2020


by:
2011 Toyota Camry

The hitch was here in a couple of days. I installed it today myself. I watched the instructional video and the installation went exactly as described. It's rock solid and looks great. This is the 2nd hitch I've installed from etrailer. 5 stars


Comments
No problems at all, well worth the price
James - 02/18/2020


by:

This is a review for the Draw-Tite Trailer Hitch Receive-Class II-1-1/4". I installed it on a 2010 Toyota Camry to attach a Swagman 4-bike rack. The hitch was installed by a local shop. Works wonderfully! It did stick out just 1/2" more than what I would have liked. I do have to be careful when going up or down a steep driveway, the hitch rubs against the road. This could be an installation issue or a hitch design issue. It just means I cannot use the Camry on a few steep inclines. But otherwise, I still rate it 5 star for the wonderful job it does. I have not seen it wobble even with the Swagman loaded with three bikes...yet to load the four bikes at a time.




by:
2011 Toyota Camry

Purchased this hitch for a 2011 Camry SE. Outstanding support from the eTrailer folks to price match, then provide missing bolts. No fuss and professional folks !!!!

The hitch was harder to install than planned. It can be done by one person. Lifting it was not the hard part. There weren't weld nuts on the passenger side, so you have to deal with that, but luckily, there are nuts and washers in the bag of hardware. The problem is that on the far right passenger side, it is very difficult to get the nut and washer in there without lowering that side of the bumper. I used black silicone to hold the nut to the washer, then was able to get the bolt to catch the nut/washer (w/o loosening the bumper). Same black silicone was used under the tabs in the trunk to seal it from exhaust fumes. All torqued-up really well and the rest of the install went easy. You don't have to lower either exhaust pipe, but you do have to remove one of the brackets.

In order to put the black plastic skid plate back on, you have some significant measuring and cutting. In the end it will look home made when viewed from the bottom; like a pack of rats chewed through portions -- you have to precision cut around those long metal extensions and the bolts that go through them. Much work. little payoff. I put a can if undercoat on the parts that were previously covered by the skid plate and the hitch extensions. looks good and protected from road grime and winter salt.

The hitch is hardly noticeable from the rear. It blends into the lower black portion of the rear spoiler. If you buy a Toyota hitch cap, it looks stock.

Good Luck and enjoy !!!!




by:
2009 Toyota Camry

I took my time installing it and it took about one hour.
I had to jack up the car in order to drill the two holes in my 2009
Camry. I did not have to unbolt the muffler.
Very happy with your hitch.


Comments
It is still working great. This was the third item I had purchased from your store. All of them are made with quality for long lasting trouble free usage.
Bill M - 07/12/2014

25
207
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Trailer Hitch Recommendation for 2007 Toyota Camry
    For your 2007 Toyota Camry there are only 1-1/4 inch hitches available like the Draw Tite part # 36416 which is a confirmed fit. 2 inch hitches are typically only seen on higher capacity vehicles like trucks and SUVs.
    view full answer...
  • Trailer Hitch Recommendation for 2008 Toyota Camry with Dual Exhaust
    For your 2008 Toyota Camry with dual exhaust we have the Draw Tite hitch part # 36416 which is a confirmed fit and would work well. We've had several customers come back with dual exhaust vehicles and state that this hitch was a fit. I attached an install video for you to check out as well.
    view full answer...
  • Removal of Black Plastic Covering on Underside of 2011 Toyota Camry to Install Hitch
    I believe you are speaking of the plastic cover shown in the video I have linked to. Before the hitch installation, the cover is removed and is not re installed after the hitch is in place. Once the hitch is installed, the plastic cover will no longer fit on the Camry. Because the hitch needs to be in direct metal to metal contact with the underside of the vehicle once it is installed, the hitch cannot be installed over the cover. To view the video I mentioned and to see the install instructions,...
    view full answer...
  • Will a 1Up Quickrack Trailer Hitch Mount Bike Rack Fit Draw-Tite Trailer Hitch # 36416
    I looked up the 1Up bike rack and it states it will fit a 1-1/4 inch or 2 inch trailer hitch. The Draw-Tite trailer hitch # 36416 is a Class II trailer hitch with a 1-1/4 inch receiver so it is compatible with the bike rack. I have included a link to the installation instructions and a link to a video showing a typical installation for you.
    view full answer...
  • Determining Tongue Weight Capacity of 2007 Toyota Camry
    The tongue weight capacity, or maximum downward force that can be safely applied to a hitch is typically 10 percent of the towing capacity of the vehicle. The combined weight of your chair plus the lift comes to 275 lbs, which is within the 300 lb tongue weight capacity of the hitch itself, but if the tongue weight capacity of your vehicle is less, you will need to abide by the lower rating. The hitch can handle the tongue weight, but you will need to determine if the vehicle itself can....
    view full answer...
  • Installing Draw-Tite Class II Trailer Hitch, Part # 36416 on 2009 Lexus ES350
    The installation procedure for the Draw-Tite Class II Hitch, part # 36416 would be the same for your Lexus ES350 as it is for the Camry. The two holes will need to be drilled into the spare tire will.
    view full answer...
  • What is the Difference Between the Draw-Tite and Hidden Hitch Available for a 2007 Toyota Camry LE
    The Hidden Hitch, part # 90152 (no longer available), and the Draw-Tite, part # 36416 are essentially the same hitches. Draw-Tite and Hidden Hitch are sister companies and these hitches were probably built using the same jigs. The difference is, as you saw, the Hidden Hitch is packaged with the proper drawbar, pin and clip, sort of a complete starter kit.
    view full answer...
  • Could a Class II Hitch Be Used as a Recovery Point for Snow/Mud
    The Draw-Tite Trailer Hitch Receiver # 36416 that you referenced wasn't exactly designed as a recovery point, BUT it has a trailer capacity of 3,500 lbs. So for snow it would work great since snow doesn't really hold the vehicle like mud can. If you are just in an area that is slick and aren't buried in mud the hitch should work well there too.
    view full answer...
  • Can Draw-Tite # 36416 or Hidden Hitch # 90152 on 2008 Toyota Camry LE Handle 4 x 8 ATV Trailer
    Although the Draw-Tite, # 36416, and Hidden Hitch, # 90152 (no longer available), trailer hitch receivers have a 300 lb tongue weight capacity and a 3500 lb towing capacity which would be sufficient for a trailer carrying 750 lbs, you are going to be limited by the capacity of your 2008 Toyota Camry LE. Since the Camry is designed primary as a passenger carrying vehicle, Toyota doesn't provide a specific towing capacity. In this case you'll just need to make sure that the load of the...
    view full answer...
  • Availability of 2-Inch Hitch for 2011 Toyota Camry Non-Hybrid SE
    We offer one hitch for your 2011 Toyota Camry Non-Hybrid SE, part # 36416 from Draw-Tite. This is a Class II hitch with a 1-1/4-inch receiver opening. No 2-inch hitches are offered for your 2011 Camry. This is because hitch makers base their hitch sizes and weight capacities on the structural strength of the vehicle's frame, where the hitch mounts. In the case of your 2011 Camry the frame structure is strong enough to handle the load of a Class II hitch, but not the load typical of a 2-inch...
    view full answer...
  • Compatability of Hitches with 2009 Toyota Camry LE
    The hitches available for the 2009 Toyota Camry will fit all Camry models with some exceptions for the SE model. 2 of the 4 available hitches will fit SE models, 2 will not. If there we exceptions for the LE they would be listed. All four of the hitches we have available for the 2009 Toyota Camry will fit your LE model. I have included a link to all the hitches available for your Camry LE.
    view full answer...
  • Does Trailer Hitch From 2000 Toyota Avalon Fit a 2011 Toyota Camry
    We do have a hitch that fits your 2011 Toyota Camry but the hitch you purchased, part # 36293, is only a confirmed fit for the Toyota Avalon from 2000 to 2004. The Draw-Tite hitch for your Camry is part # 36416. It's also a 1-1-/4 inch Class II hitch so any accessories you have will already fit.
    view full answer...
  • Which Ball Mount to Use with Draw Tite Hitch for 2008 Toyota Camry
    With Class I hitches like what you have on your 2008 Toyota Camry you have to use the recommended ball mount otherwise the warranty of the hitch is voided. For the Draw Tite hitch part # 36416 that you have you would need to use the part # 36071 which you referenced which has a 2-5/8 inch rise.
    view full answer...
  • Trailer Hitch Recommendation for 2007 Toyota Camry LE
    The hitch I recommend is the Draw-Tite Trailer Hitch # 36416. It is a good fit for your car with a 1-1/4-inch receiver, a weight capacity of 3500 lbs and a tongue weight of 300 lbs. It comes with a complete hardware kit and requires no welding during installation. You will want to check the towing and tongue weight capacity of your vehicle prior to using any trailer hitch. If the weight capacities between the vehicle and hitch are different, always use the lower of the two. I have provided...
    view full answer...
  • Trailer Hitch for a 2008 Toyota Camry Hybrid to Carry a Bike Rack
    Draw-Tite trailer hitch # 36416 is a great option for your 2008 Toyota Camry Hybrid. The plastic panel beneath the spare tire well is not an integral part of the vehicle and will not cause any harm if it is removed. It also should not require any additional cleaning or maintenance. When sealing up around the holes in the trunk pan you can use silicone such as # 0160297. The biggest issue is that you want to use an adapter to go from a 1-1/4 to a 2 inch. This will reduce the tongue weight...
    view full answer...
  • Hitch, Wiring, Ball Recommendation for a 2008 Toyota Camry XLE
    For a hitch on your 2008 Toyota Camry XLE I would recommend a Draw-Tite Trailer Hitch, part # 36416. You will need the recommended ball mount. I attached installation instructions and an installation video for this product also. The Tow Ready Custom Fit Vehicle Wiring, part # 118405, would be the correct trailer wiring for your vehicle. I attached installation instructions for this product also. For a hitch ball I would recommend the Hitch Ball with 2 inch Diameter and Short Shank, part...
    view full answer...
  • Hitch for 2013 Toyota Camry w/ Dual Exhaust
    For a 2013 Camry, you'd want to use the Draw-Tite Class II, part # 36540. This hitch will fit a vehicle with a dual exhaust. The # 36416 hitch you referred to is a fit for the 2007-2011 Camry, so it won't fit your 2013 model.
    view full answer...
    Image 1 for
  • Recommended Hitch for 2013 Toyota Camry w/ Dual Exhaust
    For a 2013 Camry, you'd want to use the Draw-Tite Class II, part # 36540. This hitch will fit a vehicle with a dual exhaust. The # 36416 hitch you referred to is a fit for the 2007-2011 Camry, so it won't fit your 2013 model.
    view full answer...
    Image 1 for
  • Can I Carry Two Heavy Electric Bikes on a 2011 Lexus ES350?
    For your 2011 Lexus ES 350, the only available hitches are Class II 1-1/4 hitch receivers. Technology has advanced where 2" hitches are being designed for newer models, but for your vehicle, a Class II is as good as it gets. The only solution here would be to use a hitch adapter # 80303 to turn your 1-1/4" into a 2" hitch. I would be cautious though, since this method halves your hitch capacity. Instead of 300lbs tongue weight, you will have 150 lbs tongue weight capacity. Rad Electric...
    view full answer...
  • Replacement Hardware For Draw-Tite Trailer Hitch Receiver on 2007 Toyota Camry
    The Draw-Tite Trailer Hitch Receiver # 36416 for the 2007 Toyota Camry will use the following hardware. Qty. (4) M10 X 40 X 1.25 CL8.8 Hex Bolt Qty. (4) 3/8” Conical Toothed Washer Qty. (2) 1/2-13 X 2.00 GR 5 Hex Bolt Qty. (2) M10 X 1.25 Hex Nut Qty. (4) Block 1/4 X 1.50 X 3.00 Qty. (2) 1/2” Lockwasher Qty. (2) 1/2” Hex Nut Qty. (2) 7/16 Washer We do offer a Replacement Hardware Kit for Trailer Hitches # RHK that you can order to receive all the correct hardware that you need. You will...
    view full answer...
  • Is Trimming of Fascia Needed to Install Trailer Hitch in 2007 Lexus ES350?
    I took a look at the installation instructions for both the Curt # C12343 hitch and the Draw-Tite # 36416 hitch to see if any fascia would need to be trimmed, and the Curt mentions that it may require fascia trimming. However, the Draw-Tite # 36416 will not, as you can see in the installation video I've linked showing the Draw-Tite being installed on a 2008 ES 350, which will be the same as on your '07 model.
    view full answer...
    Image 1 for
  • E-Bike Rack Recommendation for a 2010 Toyota Camry
    For your 2010 Toyota Camry there are Class II hitches available for it like the part # 36416 so your best option will be the Thule Easy Fold you referenced part # TH903202 . This rack fits 1-1/4 inch Class II hitches and has a ramp to make loading the bikes very easy. I attached a review video for more info as well.
    view full answer...
  • Recommendation for Hitch on 2009 Toyota Camry LE To Carry a Hoveround Power Chair With Hoverlift
    To use the Hoverlift on your 2009 Toyota Camry LE to haul the Hoveround Power Chair it does require to use a Class II or Class III hitch. All of the hitches that are available for your 2009 Toyota Camry LE are a Class II 1-1/4 inch hitch. The Draw-Tite # 36416 and Hidden Hitch # 90152 (no longer available) have a tongue weight capacity of 300 lbs. The Curt Class II 1-1/4 Inch hitch, part # 12343, has a tongue weight capacity of 350 lbs. I looked up the weight of the Hoverlift and it was...
    view full answer...
  • Which Type of Hitch do You Recommend for a 2009 Toyota Camry Hybrid
    Draw-Tite and Hidden Hitch are sister companies. The hitches use essentially the same design, the Hidden Hitch, part # 90152 (no longer available), does include a drawbar and pin and clip if you will be doing any towing. However, these two hitches have a tongue weight capacity of 300 pounds, not 350 like the Curt and Valley. If you will not be doing any towing, or your bike rack or cargo carrier load is under 300 pounds, I would not worry about it. The Curt hitch, part # 12343, also includes...
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Shane T
Test Fit:
Shane T
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Mike H
Video Edited:
Mike H
Employee Chris R
Video Edited:
Chris R
Employee Andrew K
Video by:
Andrew K
Employee Alan C
Video by:
Alan C
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.