1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # 24775
lowest price pledge
Retail:$273.31
Our Price: $150.45
You Save: $122.86
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 22 lbs
Quantity: 
24775 - Concealed Cross Tube Draw-Tite Custom Fit Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24775 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (56)
  • Q & A (29)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 24775

  • Draw-Tite
  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Concealed Cross Tube
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24775 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60846 Hidden Hitch Class 1 Trailer Hitch Receiver

Installation Details 24775 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24775

Average Customer Rating:  4.8 out of 5 stars   (56 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

- 24775
by:

Thursday evening I called etrailer.com to place an order for a Draw-Tite hitch and a Swagman XC bicycle carrier. I talked with Laura H. at etrailer.com. She was very friendly and I was so impressed with her knowledge of the products and her thoroughness. Laura took the time to make 100% sure that I was ordering the correct hitch for my car and the correct carrier to fit the hitch. I was notified when my order shipped the next morning and was provided with tracking information that kept me informed of where my order was and when it would be delivered. As promised, my order was delivered the following Monday. I was totally surprised when I opened the box. The hitch and bike carrier were packaged so much better than more for more fragile products I have ordered from other companies in the past. Every part I needed for installation was included along with clear instructions for installation and use. Everything on the Draw-Tite hitch lined up perfectly and it was very easy to install on my car. The Swagman XC carrier is very well made and sturdy and it holds our bicycles very securely. I am very impressed with the staff at etrailer.com and also with the products they sell and I would highly recommend them to anyone. 77708


Comments
I LOVE both the Draw-Tite Hitch and the Swagman Hitch Bike Rack. I have used them numerous times over the past year and they performed flawlessly.I have highly recommended both of these products, and etrailer.com, to my friends and family.You can be sure that when I am in the market for these types of products again I will most assuredly buy them from etrailer.com.
Jim M - 05/16/2014

4231

- 24775
by:

The receiver is unnoticeable when hitch is not installed. The instruction video was very accurate and to the point. I believe the bumper support is hardened steel and is very difficult to drill, I highly recommend purchasing a Cobalt bit, which will save you much agony especially if you don't have a lift rack access. 852556



- 24775
by:

very good product easy to install no pr oblems 852212



- 24775
by:

Fits nicely into all of the connection points and all components work and fit nicely. Small tips to anyone looking to buy one tho: If you have an aftermarket bumper like mine be prepared to drill a slot out. The drilling into the frame is made out of reallllyyy hard stamped steel which we couldn't drill out with a handheld drill it required a Dumore. Also you can poke a hole into the spare wheel rubbers and reuse the seals to reduce vibration and water proofing. 807242



- 24775
by:

Excellent company to work with, fast shipping and the products are well built and very thoroughly thought out. 785118



- 24775
by:

Great product at a great price 781871



- 24775
by:
2011 Mazda 3

Fits well, tucks up nicely behind the bumper cover. Sturdy and well built. Bought for use with bike rack. 778762



- 24775
by:
2007 Mercury Milan

I have a Mercury Milan 2007 premier it had the two holes in the trunk pan and the two bolts you pull out of the bulkhead everything fit right up when it come to drilling the holes in your bumper support many people have said bolts are too long however if you have a die grinder or 1/2 inch drill slot the holes out to the same size the hitche is and the bolts will go right in it is damn near impossible to just drill a half-inch hole and get them in I tried that if you only have a drill you can Waller the whole out but make sure you Waller it to the same size that the hitch is and everything will be fine I had no problem doing this by myself pretty simple installation if you Waller them Holes out do not attempt to make a half inch hole it's not going to work and don't cut the boltswell I'm off to hook up the boat oh PS make sure you order the wiring harness with the hitch 765060



- 24775
by:
2009 Ford Fusion

The hitch arrived quickly and fit my car. The installation was not as easy as described in the video (specifically drilling the 1/2" holes in the frame and using the pull wire) but was still able to get it done. etrailer customer support was helpful. 692983



- 24775
by:
2007 Ford Fusion

Easy to find the right hitch for my car. Fast delivery! Very pleased with it! I will be using it to tow my small kayak trailer. 650276



- 24775
by:

The hitch and cargo basket both worked great and my wife and I couldn't be any more pleased. 646580



- 24775
by:

Exactly what I ordered, packaged well and delivered fast! 611779



- 24775
by:
2009 Ford Fusion

Overall, very satisfied with this product! Shipping was fast and installation was pretty straightforward. I found the installation video very helpful and the same steps applied for my car (the '09 Fusion SEL model with V6 engine and two mufflers in the back). Only difference was having to lower two mufflers vs. one, everything else worked the same as in the video. Only challenges during installation were drilling through the frame of the car and fishing the carriage bolts through the bumper support as they were a little too long. I simply cut a 1/4" of the bolts off and secured the bolt to the metal plate with some electrical tape before fishing it through the bumper support and this made it much easier. You could also consider drilling the holes a little bigger than 1/2" but make sure you have a decent drill bit for getting through the frame (it took a while for me). 553481



- 24775
by:
2006 Ford Fusion

They were quick and efficient. their price was reasonable. they mailed my product quickly. all a very good experience. 517420



- 24775
by:
2004 Mazda 6

Great product. Hopefully your bolts your are taking out aren't rusted like ours were. 498617



- 24775
by:
2008 Ford Fusion

Great product fast shipping a+ on eve rything 492752



- 24775
by:
2008 Mercury Milan

Perfect fit and super fast shipping. 488705



- 24775
by:
2007 Ford Fusion

This fit perfectly. Easy done. 472830



- 24775
by:
2007 Mercury Milan

Overall installation wasn't too bad. Bolts which are meant to be fished through the bumper are too long. It's not possible to rotate them up and slide them through the drilled holes on a 2007 Mercury Milan. I had to cut 1/4" off these two bolts. Otherwise, the hitch seems very solid and fits well. 456940


Comments
Mike,Thank you for your review.The bolts that came in the hardware kit for the 2007 Mercury Milan are designed to be fished through the frame using the bolt leader provided. It may take a bit of maneuvering to get the bolt through the frame and to the mounting holes. We do not recommend trimming the bolts since it may void your warranty or affect the integrity of the hitch.
-- Heather A - 12/04/2017

31426

- 24775
by:
2008 Ford Fusion

Love it, exactly what I wanted when I o rdered. 445270



- 24775
by:
Mazda

Installed on my 2006 Mazda 6 S. The process was very straightforward, and the video was helpful. Drilling through the trunk bottom was unfortunate, but it's good to have 6 mounting points for a trailer hitch for sure. 415032



- 24775
by:
2008 Ford Fusion

The trailer hitch i bought has been amazing! I needed extra cargo space and this did the trick! The installation was easy and straight forward. 412310



- 24775
by:
2008 Mercury Milan

Price of products were very good and shipping was quick and right on time as indicated in tracking. If I ever need any other products I would being using this site again. John Caul 407161



- 24775
by:
2007 Ford Fusion

All I wanted was a trailer hitch for my fusion so that I could put a carrier rack behind the car for a vacation. So I ordered the least expensive one I could fine from etrailer. The hitch arrived exactly on time when I got home from work yesterday at 4 o'clock I had it completely installed by 730. The directions were OK but I could make sense of them ,the only problem that I had was using the wire with the curly cues to pull the bolt through the frame.I needed to elongate the holes instead of having them round, I struggled for an hour trying to get the bolt in a round hole and they would not go. Once the hole was egg shaped installation went at lightning speed. I added a little RTV sealant in the spare tire well to keep moisture coming in from underneath. 402601



- 24775
by:
2006 Mazda 6

Still can't find an adapter to fit this hitch. I need to go from 2" to 1 1/4 but haven't found any of the standard adaptors side all the way in so the pin holes can line up. Very disappointed. Wasted money. 383952


27
59
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch

  • Hitch Availability for a 2009 Lincoln MKZ
    We do have hitches available that have been confirmed to fit your 2009 Lincoln MKZ, but if Lincoln says you can't tow with your vehicle then we can't recommend you do so. Basically the hitch manufacturers will make hitches for vehicles as long as there is a demand for them, regardless of what the vehicle manufacturer recommends. For your vehicle you may still be able to carry a bike rack like the Swagman XTC2 # S64670 so a hitch like the Draw-Tite part # 24775 would work well for this.
    view full answer...
  • Trailer Hitch that Fits 2009 Ford Fusion
    We have the Draw Tite trailer hitch # 24775 for the 2009 Ford Fusion that has a towing capacity of 2,000 lbs. This capacity though is independent of the capacity of your vehicle. I tried looking up the capacity for it online and most places say it wasn't listed or it's not rated for any towing. So I really wouldn't feel comfortable telling you that your vehicle could tow a 1,500 lb trailer. Especialy on the hills you describe. If you really wanted to do it though I would recommend checking...
    view full answer...
  • Trailer Hitch Recommendation for a 2006 Lincoln Zephyr
    At this time there is not a Class III, or larger 2 inch receiver hitch available for your 2006 Lincoln Zephyr. I have included a link to the available hitches for you. The most popular option is the Draw-Tite hitch, # 24775. To look at the installation instructions and an installation video, click the provided link. I have listed some items you may need to complete your towing setup. Drawbar # 3592 Hitch Ball # 19256 or # 19258 Hitch Lock # e98879 Pin and Clip ...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for Towing and Bikes for a 2004 Mazda 6 Hatchback
    If I were choosing a trailer hitch for a 2004 Mazda 6 hatchback I would choose Draw-Tite trailer hitch # 24775. You mentioned you might do some towing. The appropriate ball mount and pin and clip is # 3592. All that would be needed is a ball # 19256 for a 1-7/8 inch or # 19258 for a 2 inch. The Curt hitch # C11308, requires the use of stabilization strap # 18050 when using the hitch with a bike rack or cargo carrier for Curt's warranty requirements. Draw-Tite does not have that requirement. The...
    view full answer...
  • 2005 Nissan Pathfinder Trailer Blinker Isn't Working Solution
    The blue relays part # 38666-1 are turn signal relays for Nissans like your 2005 Nissan Pathfinder. If the fuses are good and the blinkers are not working these are what you'd need to get them going again. The relays will install in the relay box under your hood on the passenger side of the vehicle.
    view full answer...
  • Pulling Installation Bolts Through the Frame when Installing Trailer Hitch on a 2008 Ford Fusion
    When installing a hitch that requires drilling on your 2008 Ford Fusion, like the Draw-Tite Sportframe Trailer Hitch Receiver # 24775, you will need to use a little extra force to pull the bolts through the hole that you drilled. When I first started here I helped out installing a trailer hitch on a vehicle and I had the same thought that you did. I quickly found out that if you have enough of the wire threaded on the bolt, you can actually give it a good yank and it will stay on the...
    view full answer...
  • Trailer Hitch and 4 Bike Carrying Recommendation for 2007 Lincoln MKZ
    Although they're a little different in design, the Draw-Tite # 24775 and the Curt # C11329 both have the same weight capacities and would install in the same manner. Either would work fine for you, and in this instance, you could choose the less expensive option and not feel as if you've sacrificed anything. You can use an adapter like # HTAD, but there's 2 problems with doing that. Both the hitch and bike rack manufacturers state that no more than 2 bikes should be carried in a bike...
    view full answer...
  • Recommended Trailer Hitch Receiver and 2 Bike Rack for 2008 Ford Fusion with Rear Spoiler
    For your 2008 Ford Fusion I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24775. This hitch is an easy installation that you can do or have any local mechanic you trust do for you. I've attached a video as well as the installation details to assist. The 1-1/4 inch hitch is decently recessed under the bumper of your vehicle, so I recommend the Saris Freedom EX 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount # SA4412F. This bike...
    view full answer...
  • Trailer Hitch and Wiring for a 2006 Ford Fusion
    That was a nice gift but Hidden hitch trailer hitch 60282 will not fit a 2006 Ford Fusion. It used to fit 2010 to 2012 Fusions, 2010 and 2011 Mercury Milans, and 2010 to 2012 Lincoln MKZs. But that hitch is now discontinued. The comparable trailer hitch for the 2006 Ford Fusion is # 24775. I have linked a video showing how it installs. If you plan on doing some towing the correct ball mount is # 3592. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring...
    view full answer...
  • Can a 2008 Ford Fusion Accept a Class II Hitch to Allow Use of Wheelchair Carrier
    All of the trailer hitches offered for your 2008 Ford Fusion (a great car - I used to own one until an East Coast blizzard took her away from me) are light-duty Class I types with a 200-lb tongue weight capacity. These do not have the capacity to transport a wheelchair and carrier and no Class II hitches are available for the vehicle. Your option then is to use a small trailer (which will work with one of these Class I hitches). Local outdoor and farm stores often carry small utility...
    view full answer...
  • Parts Needed to Tow Trailer with 2004 Mazda 6
    If you went with a 2004 Mazda 6 we have the Draw Tite hitch part # 24775 which fits the sedans and 5 door hatchbacks that has a 2,000 lb capacity. For trailer wiring you'd then want the part # 118405 which is a custom fit and then for a ball mount you'd want the part # 3594 and hitch ball # 19256. If you were thinking about a different vehicle let me know and I can see what would work for that as well.
    view full answer...
  • Ground Clearance with a Trailer Hitch Installed on a 2006 Ford Fusion
    Draw-Tite trailer hitch # 24775 has the receiver directly under the rear fascia. The bottom of the receiver will be approximately 1-1/2 to 1-3/4 inches below the bottom of the rear fascia. I have included an image showing the hitch in its final position. If you measure from the ground to the bottom of the fascia and subtract 1-3/4 inches that is approximately where the bottom of the hitch will be. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then...
    view full answer...
  • Troubleshooting Trailer Lights Not Working With A 2012 Nissan Pathfinder
    In order to activate the tow package on your 2012 Nissan Frontier, a wiring harness like the Curt # C56225, or # C56226 (which includes the jumpers and relays) is what you need to use. If you have all the necessary relays, I would test the wires at the back of the harness connector with a tester like # 40376. I included a video resource walking through how this is done. If your relays are missing or damaged, you will need a relay kit for your 2012 Nissan Pathfinder. For that, you will...
    view full answer...
  • Trunk Mounted Bike Rack Recommendation for a 2006 Mazda Speed 6 Hatchback
    There are no hitches available that are confirmed to fit your Mazda Speed 6, but in case you are looking for a way to transport bikes there is a trunk mounted bike rack option available. The Hollywood Racks Over-the-Top 2 Bike Carrier # HRF2 has been confirmed to fit your vehicle and would work well. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike...
    view full answer...
  • Which Trailer Hitches and Wiring Will Fit on a 2009 Ford Fusion
    We do have several hitches available for your 2009 Ford Fusion, but # 60254 is not one of them and has been discontinued. The comparable hitch to the one you referenced is the Draw-Tite Trailer Hitch, # 24775. You might also be interested in adding the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118422. This is a T-one style harness that plugs in line with your vehicles taillights and provides a 4-Way connector at the rear of the vehicle. The powered converter requires...
    view full answer...
  • Hitch and Roof Cargo Carrying Options for 2008 Lincoln MKZ
    Good for you for checking out your car's capabilities before you use it to tow. Not everyone does that! Lincoln includes the following statement on page 176 of their online owner's manual for your 2008 MKZ: "Never tow a trailer with this vehicle. Your vehicle is not equipped to tow." All is not lost, as there are still several ways to transport your cargo items on the MKZ; it just won't be with a trailer. If you were to install Draw-Tite Class I hitch # 24775 on the MKZ you could...
    view full answer...
  • Hitch Comparison and Recommendation for a 2008 Ford Fusion
    The only real difference between the Draw Tite hitch part # 24775 and the Hidden Hitch part # 60846 (no longer available) is that the Hidden Hitch comes with a ball mount and a pin and clip. These hitches are made by the same parent company and are identical. In case you don't have a ball mount yet you would also want the part # 3592, and then for a 2 inch ball # 19258 and for a 1-7/8 inch ball # 19256. For trailer wiring you would want the part # 118422.
    view full answer...
  • Differences in Trailer Hitch Installation Between a 2008 and 2009 Ford Fusion
    The 2008 and 2009 Ford Fusions are from the same generation meaning that as far as installing a trailer hitch goes, the steps and attachment points are going to be the same. The video, linked below for reference, does feature a 2008 Ford Fusion and also a Draw-Tite trailer hitch, # 24775. Both this hitch and the Hidden Hitch, # 60846 (no longer available) that you have referenced will fit a 2008 or 2009 Ford Fusion because they have the same design. So, when installing the trailer hitch...
    view full answer...
  • Comparing the Curt and Draw Tite Hitches for a 2009 Ford Fusion
    The two different hitches for your 2009 Ford Fusion are basically two different brands versions of the hitch fit for your vehicle. We have the Curt # C11329 and the Draw Tite part # 24775. The Draw Tite part # 24775 is the hitch I'd recommend for a couple reasons. It has the better price and when used with a non-supported load like a bike rack it doesn't require a stabilizer strap like part # 18050 like the Curt does.
    view full answer...
  • Trailer Hitch and Bike Rack Recommendations for a 2008 Ford Fusion
    Class I trailer hitches such as # C11329 can hold bikes but are limited to 2 bikes and the rack has to be compatible with a Class I hitch. I recommend the BikeWing # LGA54FR because it is not only Class I compatible but weighs just 20 pounds which will minimize the stress on the hitch. I have linked a video review of this rack for you. But for your 2008 Ford Fusion I actually recommend Draw-Tite hitch # 24775 for a couple of reasons. First, it costs less. And second it does not require...
    view full answer...
  • Can the Foot-Activated Liftgate Still Work with Trailer Hitch Installed on a 2015 Ford Edge
    I recommend going with the Draw-Tite Trailer Hitch # 75234 for your 2015 Ford Edge. This is a Class III trailer hitch with a 2" receiver that will not prohibit the use of your foot-activated tailgate although you may have to kick straight out in a different spot than you do now (see attached picture). If you let me know what you will be using this hitch for I can make additional recommendations if necessary. As far as towing with your 2008 Ford Fusion is concerned, I took a look at the...
    view full answer...
  • Is There a 2" Trailer Hitch Available for a 2009 Ford Fusion
    I do have an option for you but they do not make a 2" trailer hitch receiver for your 2009 Ford Fusion to my knowledge. Instead, you will want to choose from the Curt Trailer Hitch Receiver part # C11329 or the Draw-Tite Sportframe Trailer Hitch Receiver part # 24775 which both have 1-1/4" receiver tube openings. In order to get a 2" receiver tube opening on your Fusion you will need to use an adapter like part # HTAD but please keep in mind that this will reduce the hitch capacity...
    view full answer...
  • Tips for Installing Draw-Tite 1-1/4 Trailer Hitch 24785 on a 2007 Mazda 6 Sport Wagon
    You should be able to just pop out the two rubber plugs in the trunk pan of your 2007 Mazda 6 Sport Wagon, using a flat head screwdriver or trim removal tool. Draw-Tite model # 24785 does not require you to lower your exhaust to complete the installation, as the entire hitch assembly runs along the center of the vehicle, between the exhaust. Once you have popped out the two plugs, move straight back from these holes, staying in the center of the vehicle. Once you reach the inner bumper...
    view full answer...
  • Availability Of Bike Rack To Fit a 2005 Mazda 6 Hatchback
    I do have a way to carry bikes on your 2005 Mazda 6 Hatchback, but it is not with a trunk mounted bike rack. A trunk bike rack will not be able to be used on a 2005 Mazda 6 Hatchback model because the hatchback will not be able to carry the weight of a trunk bike rack. I recommend to use a hitch like the Draw-Tite Class I 1-1/4 Inch Hitch, part # 24775, along with the Thule Camber 2 Bike Carrier, part # TH9058. I am including links to the installation instructions of the hitch and a...
    view full answer...
  • Parts Needed to Use Darby Kayak Carrier DTA944-968-924 on 2007 Ford Fusion
    The hitches that are made or your 2007 Ford Fusion are the 1-1/4-inch Class I type, such as Draw-Tite # 24775 that I recommend, so in order to use a 2-inch hitch-mount kayak carrier like the Darby # DTA944-968-924 you'll need a hitch adapter # HT5R to give you the needed 2-inch hitch opening. This adapter not only gives you the larger receiver opening but it also will give you 5-inches of rise (height gain) which will improve your ground clearance when using the Darby carrier. All adapters...
    view full answer...
  • Bike Carrier Fits on 2003 Mazda 6 Sedan with Factory Spoiler
    The various colors of the Saris Bones 2- and 3-bike trunk-mount carriers are shown on the linked page and all do work with most factory spoilers, however the large spoiler on your 2003 Mazda 6 4-door sedan is not considered by Saris to be compatible. In fact Saris' FitGuide shows none of their trunk-mount racks will work with your spoiler. The same holds for Thule. And for Hollywood Racks. However, my contact at Hollywood Racks noted that while they too do not officially have trunk-mount...
    view full answer...
  • Bike Rack Recommendations for a 2005 Mazda 6 Sedan
    I checked with Hollywood Racks and they have confirmed the fit of the Hollywood Racks Baja 2 Bike Carrier # HRB2 on your 2005 Mazda 6. They do say that your vehicle has a soft bumper so deformation is possible. Because of that I would recommend you go with a hitch mounted bike rack. For a hitch to start you would want the part # 24775. Since this is a Class I hitch you would be limited to carrying 2 bikes. For a bike rack I would recommend the Swagman XTC2 bike rack part # S64670....
    view full answer...
  • Fit of Trunk Mounted Bike Carrier on 2006 Mazda 6 Hatchback
    Your best bet would be to install a receiver hitch like the Draw-Tite Class I receiver, part # 24775. The hitch can be used as an attachment point for a bike rack. Because of the limited weight bearing ability of the Class I receiver, you will be limited to carrying two bikes and would need to choose a rack that is compatible with a Class I receiver. None of our bike rack manufacturers recommend using trunk mounted racks on the Mazda 6 hatchback model, because the hatchback is not...
    view full answer...
  • Swapping Hitch Between Different Generations of Same Vehicle
    The Draw-Tite Class I hitch you referred to, part # 24865 is a fit for the 2010-2012 Ford Fusion, 2010-2011 Mercury Milan and the 2010-2012 Lincoln MKZ only. It won't fit your 2006 Fusion. For the 2006, you'd want the Draw-Tite # 24775. If you look at both hitches, as well as their installation procedure, you can see that the two hitches are quite different. I've linked you to install instructions and videos for both hitches. Even if the same hitch fit both vehicles, the hitch hardware...
    view full answer...

Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Written by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Chris R
Test Fit:
Nicholas E
Test Fit:
Alan C
Video by:
Kathleen M
Updated by:
Laura H
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.