9" Wide x 71-1/2" long x 20-1/2" tall. Get 2 extra-sturdy fenders for your tandem-axle trailer with this bolt-together fender kit. 16-Gauge steel is durable. Bolt or weld onto your trailer.
Features:
Specs:
Note: Do not use the connecting plates to mount these fenders to your trailer.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, our buddy, this is Jeff at etrailer.com. Today, we take a look at the CE trailer, tandem axle bolt together, seal trailer fenders for 14 inch to 15 inch wheels. It is for a quantity of two fenders. Now these are rounded fenders. That'll cover two tires on each side of your tandem-axle trailer. These fenders will act as a splash guard to help keep road debris from hitting other vehicles, kind of help protect your trailers cargo.
Now, these are a bolt together design, and I wanted to zoom in just to show what we're talking about. Basically, if you notice we've assembled these that this bolt together design is designed to save shipping costs because of the smaller on assemble size. When compared to a single piece fender, you can see each vendor comes as two, half fenders also comes with the connecting plate you can see underneath and all the great five hardware now does off also offer extra strength of the fender because of the way this is assembled with the connecting plate here and the nice grade five hardware holding all the pieces together. So it does get a lot stronger fender.Also, she noticed the edges on these fenders, both the inner and outer edges are all a one-inch curve. Radius slip gives you a nice extra protection and top quality appearance.
And these are a sturdy 16 gauge cold rolled steel construction. Now they are raw. Initially you might see some surface rust spots on them. Those can be easily sanded, and then you just needs to be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish.Now, if you sorry, but weld on or bolt on installation, and now they are not pre drilled. Now the mounting brackets for bolt on installation, we do sell those separately on our website.
These fenders are made in the USA specs. Again, tandem they've designed to fit tandem axle trailers with 14 inch to 15 inch diameter wheels. It is for a quantity of two fenders, the weight on each Fender's about 13 pounds and the dimension we measure these, the length from one end, all the way to the other end is going to be 71 and a half inches long. The width on them is nine and a half or nine inches wide. And then the highest from the bottom to the very top is 20 and a half inches tall, but that should do it for the review on the etrailer.
Tandem axle bolt together, steel trailer fenders for 14 inch to 15 inch wheels for a quantity of two..
Average Customer Rating: 4.6 out of 5 stars (933 Customer Reviews)
9" Wide x 71-1/2" long x 20-1/2" tall. Get 2 extra-sturdy fenders for your tandem-axle trailer with this bolt-together fender kit. 16-Gauge steel is durable. Bolt or weld onto your trailer.Seems like good quality product once I paint them and weld them on we will see how they do
Exactly what we needed! Good & sturdy m aterial
Had to replace boat trailer fenders and ordered from etrailer. Shipment was amazing and quick. The fenders were a little longer than we needed, but my husband made them fit. The outcome is great!
These fenders were a replacement on a Skeeter boat trailer. These fenders are a much better quality than the original fenders and I am very happy with them. Highly recommended.
I absolutely hate to leave this store a bad review because I've had nothing but good experiences with them in the past. However I'm extremely disappointed. I Purchased these replacement fenders through etrailer after shopping around and even though they were cheaper elsewhere I opted to do my business with etrailer and pay a little more knowing how impressed I've been in the past with the level of pride they take in shipping items, I've gotten boxes inside of boxes in the past. Unfortunately this time I recieved $xxx worth of dented up fenders for my trailer. They were only wrapped in stretch wrap, not even bubble wrap much less a box. Very disappointed in etrailer after this purchase. You guys can do better, I've seen you do better, with the rims and tires I bought there for this same trailer.
Husband modified his boat trailer from a single axle to tandem and then needed new fenders of course and these were perfect. Very pleased with them and etrailer.com was great to work with from initial purchase to delivery. Thanks!!
Great products, I'm rebuilding my boat trailer after 24 yrs. Kodiak brake system still in great shape, just needed new pads! I'm very impressed with the quality fenders. Thanks
They do not work for 15 inch wheels . My trailer had no fenders so I had nothing to compare them to. I bought some 14 ga. Material and made them 4 inches longer. I radiused the sides with a snap on impact deep socket. Mig welded them up and will sand down tomorrow . They fit great now. Thank you.
Your fenders arrived yesterday. They look fine. It would have been nice if the person I dealt with on the phone had mentioned the panels that close off the back of the fender. I noticed the panels on your web site while checking to see the status of the fenders that were supposed to be delivered on March 30 but didn't arrive until the 31st. Not a problem, since I now have to wait for the second order of the backing panels. Not totally the salesperson's fault as I should have noticed the lack of backing on the website photo. Always been good dealing with you folks so no problem.
I purchased these fenders and am very pleased with the quality. I had one get scraped during shipping and contacted etrailer, they sent a replacement quickly which showed excellent customer service! I will definitely use trailer for my trailer needs
Metal was thick enough to weld safely to the trailer frame and thicker angle iron. I did a crappy spray can paint job(just brake cleaned them before painting) and they are still looking great a year later.
I just bought them a month and a half ago, I still haven’t installed them and they are already like this
My trailer had a few tire blowouts that destroyed the plastic fenders. After ordering steel fenders and brackets from etrailer, my trailer looks brand new! The delivery and products are flawless!
After sending the wrong fenders, etrailer made returning easy and correct fenders shipped right away. Thank you.
Have to be a bit gentle with these since they can be warped out of shape before attaching, but they are otherwise good quality, and welded up nicely to my trailer.
The fenders are good quality although had to modify them to fit my trailer. My issue is how they were shipped. no protection aside from a plastic film on them and shipped both fenders in one box so they came with some scratches which was pretty disappointing. I reached out to ETRAILER but no one ever responded. if they'd take a moment to pack them to protect them during shipment I'd have given 5 stars. Although exact same size as my original fenders, I had to use ratchet straps and a floor jack to get them in position and drill new mounting holes. In the end, aside from some scratches during shipping they look great and have had no issues. I'd probably buy them again but would call and ask if they'd protect them instead of just throwing them in a box.
They sent me two of the same side fenders I believe two left fenders, I would have returned them and gotten a the correct one sent but I didn't realize until to late. We had gotten someone to come out and weld them on and he is the one who figured out they sent two of the same sides. Because he drove two hours to come weld them on for us and we needed them put on asap, we had to just weld them on anyways. Although they aren't even our welder did a great job at making them look the best he could. Wish the correct ones were sent so that they would have been perfect but it's just a bit of a bummer. The fenders them self are great looking good quality and sturdy it was just who ever packed it unfortunately made an error. I purchased a lot more things from this buisness and all are great other then this error
What great service ,I have used Etrailer several times, always happy with them.Shipped the same day ,can't ask for more than that.
Very good quality. I would recommend to anyone looking for trailer parts. Great service at a reasonable price.
Fenders look good had to trim a little off both ends of backing plates. Yes I will buy from them again.
Fenders were as advertised at a good price point. They replaced ones that had been on the trailer for 20 years. I'm certain these will last just as long.
Good quality . arrived undamaged.i welded
Metal condiut at a angle in the middle and all under the outer edge so it would be extra strong in case i have to stand on it.
Useed on Car trailer
Great product well made
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.