Looking for Replacement Trailer Fender for Tandem Axle Trailer that is 9 inch by 70 inch
Updated 02/20/2026 | Published 02/14/2026
Question:
I am looking for tandem axle fenders with back plate like Part Number: HP82VR. My fenders are 9x70 for 15” tires. Do you all carry 9x70 fenders with backing plate. If so, what is the part number. Thanks.
asked by: George S
Expert Reply:
Hey George, the closest option we have would be the Tandem Axle Trailer Fenders w/ Backing Plates # HP82VR that you referenced which are 9 inches wide and 72 inches long. These are intended for 15 and 16 inch diameter wheels like what you have as well. Would the extra length be an issue?
Darrell
2/20/2026
Pricing fantastic and they work perfectly. No issues. Would definitely recommend
Product Page this Question was Asked From
Tandem Axle Trailer Fenders w/ Backing Plates - Steel - Qty 2
- Trailer Fenders
- No Step
- 9 Inch Wide
- 72 Inch Long
- Steel
- Bolt-On
- Weld-On
- For Tandem-Axle Trailers
- etrailer
more information >
Continue Researching
- Q&A: What is the Height of the Backing Plate on the Tandem Axle Trailer Fenders HP82VR?
- Shop: Tandem Axle Trailer Fenders for Enclosed Trailers - Steel - 15" to 16" Wheels - Qty 2
- Shop: Tandem Axle Fenders - 72" Wide x 10" Deep x 20-1/2" Tall - Qty 2
- Shop: Tandem Axle Trailer Fenders for Enclosed Trailers - Steel - 15" to 16" Wheels - Qty 2
- Shop: Tandem Axle Trailer Fenders w/ Backing Plates - Steel - Qty 2
- Video: Feature Review Tandem Axle Trailer Fenders
- Video: The Low-Down on the Tandem Axle Trailer Fenders for Enclosed Trailers
- Shop: Tandem Axle Trailer Fenders - Bolt Together - Steel - 14" to 15" Wheels - Qty 2
- Shop: Tandem Axle Trailer Fenders - Bolt Together - Steel - 14" to 15" Wheels - Qty 2
- Search Results: trailer fender
- Search Results: trailer brakes
- Search Results: trailer hub
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Shop: Tandem Axle Trailer Fenders w/ Backing Plates - Steel - 14" to 15" Wheels - Qty 2
- Q&A: Where to Weld Tandem Axle Trailer Fenders w/ Backing Plates
- Q&A: Do Hub Races Have to Be Replaced Each Time Bearings Are Changed
- Q&A: How Do I Determine What Bearing Sizes I Need For My Trailer
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Trailer Tire Sizes ST205/75R15 and ST225/75R15
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Replacement Brake and Hub Assemblies Needed for Dexter Axle 3,500 lb Axles
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: What Is Flat Towing and How to Ditch the Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Lighting Requirements
Ron R.
2/19/2026
I bought the above mentioned fenders for.my trailer and they fit great! Easy to install, and with a coat of primer and paint, look great too!