Do You Have an Aluminum Fender 11" Wide for a 15" Wheel on My Mission Enclosed Trailer?
Updated 09/12/2025 | Published 08/23/2025
Products Featured in This Question
Question:
Hi, I have a Mission enclosed trailer and need a L/S fender to replace one that I bent up. The fender is smooth aluminum, 11 wide, 36 long, and is rounded 180 degrees. It is over a 15 tire/wheel. I see that you offer a fender but it is not rounded and is diamond plate finish. I would like it to match the other side. Any suggestions other than buying both sides? Thank you.
asked by: Dave D
Expert Reply:
Hello Dave,
The issue that I am running into is the width, and finding something in aluminum. The options we carry are 10" wide, in either cold rolled steel or galvanized.
Here are the part numbers we have available:
- Single Axle Jeep Style Trailer Fender - Cold Rolled Steel - 13" to 15" Wheels - Qty 1 # HP76VR
- etrailer Single Axle Jeep Style Trailer Fender - Galvanized - 13" to 15" Wheels - Qty 1 # HP23RR
You may want to reach out to Mission directly to see if they can tell you where they source their fenders, or consider swapping both out to the 10" wide style so they match.
What happened to the fender? Was it one of those funny stories that maybe didn’t feel so funny in the moment?
(click to enlarge)
Product Page this Question was Asked From
Single Axle Jeep Style Trailer Fender - Cold Rolled Steel - 13" to 15" Wheels - Qty 1
- Trailer Fenders
- No Step
- 13 Inch Wheels
- 14 Inch Wheels
- 15 Inch Wheels
- 10 Inch Wide
- 36 Inch Long
- Steel
- Bolt-On
- Weld-On
- For Single-Axle Trailers
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Galvanized Jeep-Style Trailer Fender 36" x 10" Single Axle - Qty 1
- Shop: Weigh Safe Wheel Chocks - Qty 4
- Shop: Demco eZ-Latch Gooseneck Coupler - Round Inner Tube - 2-5/16" Ball - 30K GTW
- Search Results: plastic fender
- Shop: Dexter Trailer Hub and Drum Assembly - 6,000 lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Shop: Demco Spare Tire Mount for up to 4" Trailer Tongue - Silver
- Shop: Single Axle Trailer Fenders w Mounting Brackets - White Plastic - 13" to 15" Wheels
- Search Results: backing plate
- Search Results: gooseneck coupler
- Search Results: e5226
- Search Results: spare tire mount
- Search Results: couple lock
- Search Results: bk4~100
- Video: Review of the ProGrip SR Track with 2 Carriage Anchors
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: How to Choose a Trailer Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Article: Trailer Lighting Requirements
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
on Trailer Fenders
Kate F.
9/12/2025
Hey Dave, did you have any luck reaching out to Mission about the fender or deciding on a solution? I'm curious because it might help others facing a similar situation.