Dimensions for Portions of etrailer Trailer Fenders
Updated 03/31/2014 | Published 03/29/2014 >
Products Featured in This Question
Question:
Hi I am looking at a couple different model #s. HP76VR and HP99VR. The measurements given on the web site are that the J101936 is 10inch wide, 36inch long and 19 1/4inch tall. I would assume that in the picture I attached, line #1 would be the tall mesasurement from the website, #2 line would be the length measurement and I know the width would be how much of the tire it covers width wise. But my questions are, what are the measurements on line #3 and #4 from my picture for both models? I would assume that #4 would be similar to the tallinch measurement but slightly different as it is not straight up and down. And Im unsure of the length of line #3 as well. Can you provide those measurements for both models #s?
asked by: Jeremy
Expert Reply:
I went out to the warehouse and pulled the two fenders and took the measurements you requested of each one.
The dimensions of the etrailer Trailer Fender # HP99VR from the side starting from the ground straight up to the midpoint of the radius measures 15 inches. The dimension for the top from the midpoint of the radius (both sides) is 7 1/2 inches.
The dimensions of the etrailer brand Trailer Fender # HP76VR from the side starting from the ground straight up to the midpoint of the radius measures 17-1/2 inches. The dimension for the top from the midpoint of the radius (both sides) is 20 inches.
I have attached two images showing the dimensions.
Product Page this Question was Asked From
Single Axle Jeep Style Trailer Fender - Cold Rolled Steel - 8" to 12" Wheels - Qty 1
- Trailer Fenders
- No Step
- 10 Inch Wheels
- 11 Inch Wheels
- 12 Inch Wheels
- 8 Inch Wheels
- 8 Inch Wide
- 24 Inch Long
- Steel
- Bolt-On
- Weld-On
- For Single-Axle Trailers
- etrailer
more information >
Continue Researching
- Video: Review of CE Smith Trailer Fenders - No Step - CES73WR
- Q&A: How to Determine Bolt Pattern of Trailer Where There is No Wheel
- Q&A: What is Largest Trailer Tire Size that Has 4 on 4 inch Bolt Pattern
- Q&A: Availability of Wheel and Tire to Replace B78-13 that Has 4 Bolt Mounting Pattern
- Q&A: Recommended Wheel/Tire Combo W/ a 4 on 4 Bolt Pattern
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Hard Tonneau Covers vs Soft Tonneau Covers
- Article: How to Raise Your Travel Trailer Height
- Article: Slipper Spring Trailer Suspension System Review
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Mastering Tire Maintenance: Does Tire Pressure REALLY Matter?
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range B
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range B
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range C
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: Single Axle Jeep Style Trailer Fender - 8" to 12" Wheels - Qty 1
- Video: Detailed Breakdown of the Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres

