See what our Experts say about this TruRyde Trailer Bearings Races Seals Caps

• What Size Dust Cap Does The Dexter Idler Hub DX77UR Use?
  Hey Jim. The Dexter Trailer Idler Hub Assembly for 2,700-lb Axles item # DX77UR comes with a 1.99" OD grease cap like item # DX59HR. When you say removable seal are you referring to the EZ Lube Grease Caps like item # DX69HR? If so these are what you need for the Dexter Idler Hub item # DX77UR.
  view full answer...
• What Grease Cap do I Need for My Malone EcoLight Sport Trailer?
  Hello Ginger, Thank you for the kind words about our customer service. For your Malone EcoLight Sport Trailer with V-Style Carriers for 2 Kayaks - 400 lbs # MAL43FR the correct center cap is the Grease Cap - 1.988" Outer Diameter - Drive In # F001518. Are you able to get out on your kayak often?
  view full answer...
• Replacement Dust Cap For Malone MicroSport LowBed Trailer
  Hello Shaun, the Malone MicroSport trailer uses a 1.98" dust cap. For that you can use the Grease Cap # F001518.
  view full answer...
• Replacement Dust Cap for a Malone MicroSport Trailer
  Hey William. All we would have is the grease cap. We don't do hub caps so hopefully this is what you mean. The Malone MicroSport trailer uses a 1.98" dust cap so you would need item # F001518. If you have any additional questions go ahead and throw them into the comment box below and I'll be happy to help you with them.
  view full answer...
• Parts Needed To Convert Oil Bath Hubs On EZ Loader Boat Trailer To Grease
  While we do not carry a replacement cap which will allow you to convert your hubs from oil bath to grease we do have a hub and all the components you will need to install a new setup which can be filled with grease. You will need one of each per hub. Hub # DE36VR Inner Bearing # L68149 Outer Bearing # L44649 Grease Seal # 168255TB Grease Cap # F001518 When I reached out to EZ Loader they told me you would need an entirely new hub as well but I was able to determine your grease cap has...
  view full answer...
• Trailer Hub Bore Caps Which Fit Between 1.9" and 2.0" Hubs
  It is best to use a Digital Caliper # PTW80157 to determine the exact size of your hub bore to find the correct size cap. A 1.988" Cap # F001518 is the most commonly found size on current 2,000lb and 3,500lb axles. We do also have a couple Bearing Buddy protectors in a few other rare sizes you can use. 1.938" Hub Bore # BB1938SS 1.968" Hub Bore # BB1968SS 1.980" Hub Bore # BB1980A-SS If none of these sizes will fit please let me know what size hub and bearings you have as I can recommend...
  view full answer...
• Help Reducing The Chances Of Water Getting Inside The CE Smith Hub Assembly # CE13511
  First be sure to check your Grease Seal # 58846 for any signs of damage on your CE Smith Hub Assembly # CE13511. The Grease Cap # F001518 would be a better option than the one with a rubber grommet since it is another part which can fail. Personally I prefer the Bearing Buddy Bearing Protectors # BB1980A which have the auto check feature. The addition of the spring allows you to easily see the hub is full of grease and the tension the spring puts on the grease helps to keep water from...
  view full answer...
• Replacement Hub For Trail Star Boat Trailer With 5 Lugs For Threaded Wheel Bolts and L44649 Bearings
  Thank you for including the image Nick as that helps me see your hub has the 5 lugs and threaded holes for wheel bolts. The Dexter Trailer Idler Hub # 008-258-04 is currently the only hub we have for your spindle size which has the threaded holes. This hub comes with the races pressed in but you will need 2 of the Bearings # L44649. a Grease Seal # 10-9 and either a EZ Lube Grease Cap # DE69YR, Standard Grease Cap # F001518 or we have the Bearing Buddy # BB1980A you can upgrade to. We...
  view full answer...
• How to Determine What Size Grease Cap is Needed
  If you can provide the reference number for the OUTER wheel bearing, I can determine which replacement grease cap you actually need. You can also use a digital caliper to find the exact inside diameter of the hub bore. With a standard grease cap, the next larger size from the 1.98 inch is a 2.25 inch, which is quite a bit larger. If you're speaking of a bearing protector like the Bearing Buddy, the next largest size from the 1.98 is the 2.047 inch. If you click the provided link, you...
  view full answer...
  
• Availability Of Galvanized Idler Hubs To Replace Dexter 8-248 Idler Hubs
  We do have the etrailer Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K and Trailer Idler Hub Assembly # AKIHUB-545-35-G-K available in a galvanized finish. Currently the Dexter 8-248 Idler Hub # 84545BX we only carry in the black finish. We also have the CE Smith Trailer Idler Hub Assembly w/ Case # CE13515 that is also galvanized or the Kodiak Trailer Hub # KH84545S made from stainless steel. The stainless will give you the best corrosion resistance of all the hubs. You...
  view full answer...
• Recommended Bearings, Seal, And Grease Cap For Lippert 3500 lb Axle
  According to Lippert, the items in # BK2-100 bearing kit are the correct parts needed to replace the bearings on one hub of your Lippert axle. For a dust cap, you will most likely want the Grease Cap - 1.988" Outer Diameter - Drive In # F001518, but I recommend measuring your hubs to confirm.
  view full answer...
• Replacement Dust Cap for Hub of Malone LowMax Trailer
  For the Malone LowMax trailer the correct replacement dust cap is the part # F001518.
  view full answer...
• Recommended Dust Cap for Dexter 10" Hub-and-Rotor Assembly
  The Dexter 10" Hub-and-Rotor Assembly part # K08-435-05 works with the Grease Cap part # F001518.
  view full answer...
• Bearings, Seal, Grease Cap, & Grease For Malone MicroSport Trailer
  We do indeed have the correct replacement bearings, grease seal, grease cap, and grease for your Malone MicroSport Trailer # MPG460G. What you will need is the following: - Bearing Kit # BK1-100 - Grease Cap # F001518 - LubriPlate Poly HP-2 Wheel Bearing Grease # L11465 The bearing kit comes with the correct bearings, races, and seal for one hub on your MicroSport trailer. Then for a grease gun and bearing packer use the LubriMatic Grease Gun # L30200 and Bearing Packer # ALL647646.
  view full answer...
• Replacement Interior Wear Components For Dexter 8-248 Idler Hub
  Your Dexter 8-248 Hub # 845475UC1 uses the following interior parts. Inner Bearing # L68149 Inner Race # L68111 Outer Bearing # L44649 Outer Race # L44610 Grease Seal # 58846 Grease # L11390 Depending of if you have a standard spindle or E-Z lube spindle there are different grease caps available. Grease Cap # F001518 standard spindle Bearing Buddy # BB1980A upgrade to standard spindle Grease Cap # DC200L-DCRP for E-Z lube spindle And finally there are different nut retainer based...
  view full answer...
  
• Recommended Hub & Drum & Brakes That Measures 10 x 2 1/4" and has a 5 on 4 1/2 Bolt Pattern
  Hey Derrick, the good news is yes it does exist. So what you're going to want is the Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing # AKFBBRK-35 for brakes, and the 10" Hub and Drum for 3.5K Axle AKBD2-545-97 for the hub and drum. This hub and drum has a 10" x 2-1/4" diameter, a 5 on 4-1/2" bolt pattern, and is designed for 3,500-lb axles. Along with the hub and drums and brakes, you're also going to need the grease seal # 58846, the inner bearing # L68149, the outer bearing...
  view full answer...
• How to Measure to Determine Correct Trailer Hub Grease Cap
  You will want to use a dial caliper or micrometer like part # PTW80157 to measure the inner diameter of the hub you have on your trailer to determine what size cap would be needed. Check out the picture I attached that shows this measurement being taken on a hub. I attached a link to all the grease caps we offer, once you know what size you need check out the link I attached to see all the sizes we offer. The closest cap we have to what you listed is the part # F001503 which has an outer...
  view full answer...
  
• What is The Difference In The Dexter Trailer Hub/Drum Assemblies # 84656UC3 & # 84656UC3-EZ?
  You are correct the only difference in the Dexter Trailer Hub and Drum Assemblies # 84656UC3 and # 84656UC3-EZ is the grease cap. The Kit # 84656UC3-EZ uses an EZ Lube # DC200L-DCRP cap while the other has a standard Grease Cap # F001518 spindles without a grease cap.
  view full answer...
• Grease Caps With Outer Diameter Smaller Than 1.988 Inches
  We do have a grease caps that are smaller than those with a 1.988 outer diameter like the Grease Cap # F001518. In order to know the correct fit for certain you will need to use a digital caliper and take a measurement, but I'll go ahead and list out the smallest size grease caps we offer so you can try and match up the correct size. - 1.957" Outer Diameter: Grease Cap # TRAG-DC-196 - 1.943" Outer Diameter: Fulton Grease Cap # F001524 I have also added links below to video reviews for...
  view full answer...
• Purpose of Grease Caps and How to Measure to Get Correct Size
  The purpose of the grease cap is to protect the bearing and the axle from any dirt getting into the bearing, which would then damage the bearing, hub and axle. So it is a good idea to have caps on your axle. To get the correct size cap you would need to measure the inside diameter of the cap mounting surface on your hub. Then that measurement would match up to the cap size outside diameter. The sizes of caps only vary by a small amount so the measurement has to very accurate. Some of the...
  view full answer...
• Is There a Special Tool Or Trick To Installing Trailer Grease Cap On Trailer Hub?
  One simple trick to help install the Grease Cap # F001518 from the Timken Bearing Kit # TMK34ZR is to put the cap in the freezer. The extreme cold temperature will actually cause the steel to shrink slightly making it easier to get the cap started. Be sure to clean both the portion of the cap and hub where they fit together as any lubricants on the surfaces will actually make it harder to install since they add to the thickness. Also if you have a large socket which fits over the cap but...
  view full answer...
• Bearing Buddy Recommendation for Hub Bore of 2.32 inches
  The closest Bearing Buddy we have to fit a hub bore of 2.31 inches is the # BB2328SS. This is for a hub bore of 2.328 inches. You might measure yours again with a digital caliper like part # PTW80157.
  view full answer...
• Bearing Buddy Recommendation to Replace a 2-3/32 Diameter Grease Cap
  If the measurement you listed (2-3/32 inches) the only caps we offer that would work would be a Bearing Buddy part # BB2080SS. We do not have any standard grease caps that would fit.
  view full answer...
• What Might Cause a Grease Cap to Keep Coming Off of the Hub Assembly On a Boat Trailer
  I would recommend to remove and reinstall the complete trailer hub assembly to make sure all of the parts are installed properly. I am including a link to a video of how to remove and reinstall a trailer hub on a boat trailer. This video will show you how to take off the hub assembly and how to properly put it back on and tighten the spindle nut. The spindle nut on the end of the spindle should be held on with a cotter pin or tang washer. If the cotter pin or tang washer is missing that...
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?