Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube

Ask the Experts about this Loctite Lubricants Sealants Adhesives

• Parts Needed to Flat Tow 2020 Lincoln Nautilus
  There are a number of parts needed to flat tow your 2020 Lincoln Nautilus 2.7L V6 engine and we can start with the wiring you asked about, which would be the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This kit is recommended because it is designed to prevent any type of electrical feedback to keep your Lincoln's electrical system safe. Along with this wiring kit here are the other parts recommended to flat tow your 2020 Lincoln Nautilus with a 2.7L V6 engine: -...
  view full answer...
• Parts Needed to Flat Tow a 2005 Jeep TJ
  Flat towing your 2005 Jeep TJ will require a base plate kit, tow bar, wiring, and braking system, but you will need to remove your front-mounted hitch because it will interfere with the base plates. If this is something you are willing to do, here are all the parts you need in order to flat tow your 2005 Jeep TJ, assuming you also have the standard factory bumper: - Base Plate Kit: Blue Ox Base Plate Kit # BX1120 - Tow Bar: Blue Ox Alpha 2 Tow Bar # BX7380 - Wiring Kit: Roadmaster...
  view full answer...
• Lippert 6-Point Level-Up System Foot Pad Torque Requirement
  For the 6-point Level-Up System by Lippert, I made a call to the manufacturer to ensure you would receive correct information. Lippert said that when you bolt the footpads to the jacks, you need to torque them to 132 ft-lb. They said to make sure to use Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube, # LT37420 on the footpad bolts and do not try to remove the bolt once it is tightened as removing the bolt could result in damage to the cylinder. It...
  view full answer...
• Parts Needed to Flat Tow 2014 Honda CR-V
  We can get you all the parts you need to flat tow your 2014 Honda CR-V, and let's start with the base plates you mentioned, which are a fit so long as your CR-V does not have the extra bumper trim package - the Roadmaster Direct-Connect Base Plate Kit # RM-521567-5. Keep in mind when installing this you will need the Loctite Threadlocker # LT37420. The best tow bar available, due to its long arms, lighting, and included safety chains - saving you an extra purchase - is the one you...
  view full answer...
• Parts Needed to Flat Tow 2013 Cadillac SRX Behind a Motorhome
  There are a number of parts you will need to flat tow your 2013 Cadillac SRX, which I'll list for you. All of the parts are going to be required, and these are going to be the best parts for your Cadillac as they offer you the best value in terms of both quality and cost. Here are the parts you'll need: - Base Plate Kit: Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # RM-523162-4 - Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 - Safety Chains: Roadmaster...
  view full answer...
• Is there a Way to Lock D-Ring Shackles to Front Of Jeep Wrangler Bumper
  Most Jeep guys leave the D-rings inside the Jeep or torque down the pins so tight that it would take a very determined thief to get them. You can also try a thread locker like the part # LT37420 to make them even harder to remove.
  view full answer...
• Replacing Foot Pad On Lippert 6-Point Level-Up System - 132 Ft-lb Torque Requirement + Loctite
  I understand your concern. I called Lippert to verify that the 132 Ft-lb of torque and use of Locktite is still valid. They said that was the requirement and there were no alternative instructions. The assumption is that this is the method they used for installation and that by removing the foot pad you will run the risk of damaging the cylinder. I also verifed the order that bolts, washers, and o-rings are installed. It is bolt, then washer, then o-ring, then through the foot pad, add...
  view full answer...
  
• Tow Bar Wiring for 2006 Chevy Suburban Z71
  We do have harnesses that will work for your 2006 Chevy Suburban but my guess is the Z71 doesn't have the needed connector to install the Hopkins harness you were referring to. I can see why you would want to use that one as it does not involve splicing, but each of the harnesses that fit a 2006 Suburban Z71 are going to require splicing to install, and for that I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. Other parts you'll need to flat tow your...
  view full answer...
• Troubleshooting Wear On Folding Hitch And Recommendations For Hardware
  If your bolts are getting loose, I recommend using Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube # LT37420 and torquing your bolts to the manufacturer specs. The Loctite will keep the bolts from coming loose and prevent further wear because of loose hardware. If you need to replace the unit you currently have due to the oblong holes, I recommend the Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Tongue - Bolt On - Up to 5,000 lbs # FHDPB330301. ...
  view full answer...
• Replacing SumoSprings Solo Custom Helper Springs SSR-610-40 on 2005 Toyota Tundra
  I'm certainly sorry to hear about one of the SumoSprings falling off off your 2005 Toyota Tundra; however, they are only sold in pairs so you would need to replace the set with the SumoSprings Solo Custom Helper Springs # SSR-610-40. I do recommend using Loctite on the bolts as well, the Loctite Threadlocker 262 - High Strength # LT37420.
  view full answer...
• Roadmaster Base Plate for 2020 Jeep Cherokee Trailhawk
  For your 2020 Jeep Cherokee Trailhawk the Roadmaster base plate kit that's confirmed to fit and I recommend is the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521451-5. I like Roadmaster base plate kits more than any other I've installed. They seem to go on smoother, and have less drilling, modifying or obstacles to work around. When it is fully installed, it has a really clean look as well, the base plate replaces the factory tow hooks up front, and the arms are...
  view full answer...
  
• Are Roadmaster or Blue Ox Base Plates Easier to Install on 2011 Honda CR-V
  Between the base plates that fit your 2011 Honda CR-V, the Blue Ox Base Plate Kit # BX2246 and Roadmaster Direct-Connect Base Plate Kit # RM-521559-5, I recommend the Roadmaster as it will be the slightly easier installation. The reason for that is the Roadmaster does not require having to saw off part of the bumper core in order to install the base plates, which the Blue Ox does require. That is the major difference between the two installs so if it were my 2011 Honda CR-V I would...
  view full answer...
• Replacement Crossbar Hardware for Yakima Y01151 OverHaul HD Truck Bed Ladder Rack
  Although Yakima doesn't offer the M8 x 18mm security Hex Screw as a separate item, they do offer the screws as part of their # Y42XR replacement hardware kit which includes 4 of the M8 x 18 screws, 4 flat washers, 4 lock washers and 2 nut plates. As you can see by using the provided link, the kit is very inexpensive and it never hurts to have some spare parts around. I'd also think about using some thread locker like # LT37420 to make sure the hardware doesn't back out again.
  view full answer...
• Is Red Loctite Required to Use Roadmaster Hitch Mounted Spare Tire Carrier RM-195225
  It is not necessary to use red Loctite like # LT37420 on the hitch bolt of the Roadmaster Hitch Mounted Spare Tire Carrier # RM-195225. It is optional, like you mentioned, and the intent with the Loctite is simply added tightness at the connection and security since the bolt is anti-rattle and not locking. What you can do instead is use Loctite Blue # LT37614 like you mentioned, and instead of the hairpin on the hitch bolt, use the RoadMaster Quick-Disconnect Padlock # RM-301.
  view full answer...
• Parts Needed to Flat Tow 2014 Ford Explorer
  There are several components to safely flat tow your 2014 Ford Explorer, a base plate, a tow bar, safety cables, a wiring/lighting solution, a battery charge line and a supplementary braking system. I linked an article that goes over all of these in detail. The Blue Ox Base Plate Kit with removable arms # BX2632 is confirmed to fit if you have the 3.5L v6 or the 2.0L ecoboost and the one I recommend. I think it has a clean look on the front of the Explorer when your not towing. The arms...
  view full answer...
  
• How To Keep Hinge Bolts From Coming Loose On the Furrion 2-in-1 Range Oven
  Yes, you can use thread locker part # LT37420 on the bolts that hold the glass to the hinge on the Furrion 2-in-1 Range Oven like part # FSRE21SABL. The issue however could be damaged threads or inproper torque so it might be a good idea to go ahead and replace them or keep some on hand, the Replacement Hinge for Furrion 2-in-1 Range Oven part # LC719851 are correct for the Furrion 2-in-1 Range Ovens.
  view full answer...
• Installing A Replacement Foot Pad For Lippert Hydraulic Ground Control Level System
  The replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System - Qty 1 # LC324269 needs to be torqued to 132 ft-lb and Lippert recommends using some Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube Item # LT37420 to prevent the bolt from loosening. You are correct with the placement of the washer and o-rings.
  view full answer...
• Flat Tow Set Up For A 2021 Jeep Wrangler Unlimited
  We do not offer a complete flat tow kit for a 2021 Jeep Wrangler Unlimited because there are too many different product variations that some vehicles require and others don't. We do not offer the ready brute 2 tow bar kits. That being said I am more than happy to list out the products I have installed and recommend, that would be best for setting up your Jeep to be flat towed. I recommend the following: Roadmaster Direct-Connect Base Plate Kit Item # RM-521453-5. This base plate attaches...
  view full answer...
• Installation Troubleshooting for Squeaking EcoHitch on 2005 Toyota Prius
  The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2" # 306-X7196 should be torqued to 40 ft lbs. The hitch receiver itself normally doesn't squeak, and lubricating the hardware will not help. Normally you would do the opposite and add lock-tite thread locker like # LT37420. I'll send you the entire installation instruction link.
  view full answer...
  
• Attaching Safety Cables to the Blue Ox Base Plate Kit Part # BX3824 2006 Volkswagen New Beetle
  There are two sets of safety cables that are required by law for all flat-towing application. There are what is referred to as short and long safety cabes. Short safety cables connect the base plates to the vehicle and long safety cables connect the base plates to the RV's trailer hitch. The short safety cables included with the Blue Ox Base Plate Kit part # BX3824 can be wrapped around anywhere on the vehicle's frame and base plates crossbar. The location of the short cables are not...
  view full answer...
  
• Components Needed To Flat Tow A 2016 Jeep Cherokee
  You will need to purchase and install Mopar flat-tow wiring kit 68321424AB before flat towing your vehicle, as per Jeep tech bulletin (08-010-17) for the 2014-2018 Jeep Cherokee. This kit is available at your local Chrysler and Jeep dealership. To flat tow your 2016 Jeep Cherokee you also need the following items: 1. Blue Ox Base Plate Kit - Removable Arms Item # BX1138. This kit, once installed has removable arms which maintains a clean factory look when the vehicle is not being...
  view full answer...
• Recommended Complete Flat Tow System for 2017 Jeep Wrangler Unlimited
  For your 2017 Jeep Wrangler Unlimited, I recommend starting with the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # RM-521448-4. This kit has removable arms to give you a very clean look when not flat towing your Jeep and also gives you a clean connection to your tow bar when towing behind your motorhome. I recommend installing this base plate using Loctite threadlocker # LT37420 to keep your hardware from vibrating loose over time. For your tow bar, I recommend the Roadmaster...
  view full answer...
• Recommended Complete Flat Tow System for Toyota FJ Cruiser
  For Toyota FJ Cruiser models between 2007 and 2014, I recommend using the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 1183-1. This will give you custom fit brackets that will allow you to bolt them right on with Loctite # LT37420. Then I recommend the following: Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs # RM-520 Safety Cables # RM-643 Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 Battery Charge Line Kit for Towed Vehicles #...
  view full answer...
  
• Recommended Parts Needed to Flat Tow a 2018 Jeep Wrangler JL or JL Unlimited
  For your 2018 Jeep Wrangler JL, I recommend starting with the Roadmaster EZ5 Base Plate Kit # RM-521453-5. This kit has removable arms to give you a very clean look when not flat towing your Jeep, and also gives you a clean connection to your tow bar when towing behind your motorhome. I recommend installing this base plate using Loctite threadlocker # LT37420 to keep your hardware from vibrating loose over time. For your tow bar, I recommend the Roadmaster Nighthawk All Terrain, Non-Binding...
  view full answer...
• Recommended Flat Towing Components for 2005 Jeep Wrangler
  For your 2005 Jeep Wrangler to be flat towed, I recommend starting with the Roadmaster EZ5 Base Plate Kit # RM-521424-5. This will install easily with some Loctite Threadlocker # LT37420. Then for your tow bar, I recommend the Roadmaster Falcon 2 Tow Bar - 6,000 lbs # RM-520 which will fit the 2 inch receiver on your motorhome and connect to your base plates. Then for safety cables, I recommend The Roadmaster # RM-643 which will coil and keep tension so they don't drag on the ground....
  view full answer...
• Recommended Replacements For A 3,200 Pound 2 Speed Fulton Winch
  From what I could tell, it looks like you have the Fulton 2-Speed Trailer Winch # F142424 currently installed on your trailer. With that said, the Replacement Handle # F501108 and Replacement Input Shaft Kit # F501134 will definitely be good replacements for you. The Fulton replacement handles will be the exact same ones that come with their winches from the get go, so they will be the same quality steel as the original. Though welding will obviously be a stronger bond, you may try using...
  view full answer...
  
• Recommended Components for Flat Towing a 2018 Subaru Crosstrek with Manual Transmission
  The power steering will not be an issue and no battery disconnect is needed. If there were an issue with this, they would not allow it to be flat towed without restrictions, which they have not needed to do. For instance the CVT transmission for your model year cannot be flat towed or dolly towed as damage to the transmission would occur. For your 2018 Subaru Crosstrek, I recommend you start your flat towing system with the Roadmaster Base Plate Kit # RM-52927-5 and install using...
  view full answer...
• Bolt Torque When Installing Replacement Finger Guard for Roadmaster Falcon
  I spoke with Roadmaster and they told me there isn't a specific torque figure to use since if you overtighten them the arms won't be able to move. "We suggest tightening so that the tow bar is easily maneuverable but can still hold itself up on its own (be sure to use red loctite) like # LT37420. The guards of the # RM-A001237 basically just get lined up like the picture I attached and you'd be set.
  view full answer...
  
• Recommended Flat Towing Components for 2010-2013 and 2014-2015 Chevy Equinox
  For 2010-2013 and 2014-2015 Chevy Equinox models, there are a few components you will need to safely flat tow your vehicle. You will need base plates, a tow bar, safety cables, tow bar wiring, a supplemental braking system, a high low adapter, and a few other parts for power and fuses to make sure everything works together properly. I'll walk you through each part with a brief explanation to assist. Let's start with the base plates. I recommend the Roadmaster EZ5 Base Plates # RM-523160-5...
  view full answer...
• Recommended Complete Flat Towing System For 2017 Jeep Wrangler Unlimited
  For your tow bar, I recommend the Roadmaster Falcon 2 Tow Bar - Motor Home Mount - 2" Hitch - 6,000 lbs # RM-520. This tow bar has stainless steel, telescoping arms that automatically lock into place. It has a large hookup radius, so you don't need to be perfectly lined up with your vehicle to connect. This tow bar easily folds up to store on your RV when not in use. For compatible base plates, I recommend the Roadmaster EZ4 Base Plate Kit - Removable Arms # RM-521448-4. These removable...
  view full answer...

Do you have a question about this Lubricants Sealants Adhesive?