To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you need to protect tools or weekend gear from weather and theft, this hard polycarbonate cover locks down tight. The pop-up handle lets you retract it with one hand, then latch it anywhere along the rails. Close it fully and lock it in place against your tailgate for maximum security—no one can pry it up or cut into it. And when you need to haul taller items, you can leave it partially open to keep smaller cargo covered near the bulkhead.
The cover glides along its rails on sealed ball-bearing rollers for smooth, maintenance-free movement. There are no springs, hinges, or straps to fight with, and it never needs lubrication. The spiral track system keeps the polycarbonate slats from rubbing against each other while they retract into the compact canister. That means it opens cleanly and closes evenly every time without binding, even in freezing temperatures.
Built from high-quality polycarbonate (Lexan) reinforced with 5/8" thick metal I-beams every 4-3/4", this cover is tough enough to handle impacts and up to 200 lbs of evenly distributed weight. It holds up in temperatures from -50°F to 200°F without cracking, swelling, or fading. Foam seals and weather stripping around all sides keep out snow, dust, and rain, while the overlapping tailgate edge blocks runoff. Two drain tubes in the canister channel out any water that sneaks in, so the cover stays dry and mildew-free.
The integrated T-slot rails let you mount T-slot-compatible racks from Yakima, Thule, or Rhino-Rack, so you can carry bikes, kayaks, or a rooftop tent above the bed. The retractable design keeps full bed access while the racks stay mounted, giving you both secure storage below and extra hauling room above.
The low-profile rails sit just 1" above the bed for a flush, finished look. The matte black finish resists scratches and UV damage, blending in with the truck’s lines. Installation is simple—no drilling required. The canister and side rails clamp on securely with included hardware for a tight, professional fit that’s ready for work or travel.
Ratings & Reviews
Looks good and feels sturdy
Awesome product as it was easy to insta ll!
Still works great. Been outside in the elements for a year. Looks and functions great.
perfect fit. solid build. Fast shipping
Product very good. Drain plugs could fit better keeps popping out
Installation went well. Quality workman ship.
E trailer is great. But when the cover arrived and I installed it the cover had a hole in it or a small flaw
I have seen this product on other trucks and liked it. It was fairly easy to install(some good videos on[line]) my son helped me, two people make it go faster and easier. Thanks for the good service and price.
Looks very sharp and fits well on my 2022 Silverado 1500 5'8" bed, and the fits well with Rihno Rack heavy duty crossbars 65" long.
Shipping was fast. Everything arrived in tact.
The instructions for the cover were fairly easy to follow and it fit our 2023 Canyon Denali with a spray in bedliner perfectly.
The product quality is very good, and I anticipate many years of useful service. Regrettably, the assembly directions are somewhat superficial. Identifying hardware (i.e.: screw size, color, etc.) is particularly challenging as there is not an actual size comparison chart. Properly aligning the product was also very difficult, multiple attempts were required.
Very good quality tonneau cover and it just glides when opening and closing. Installation was super easy too.
Pretty decent cover and installation was reasonable. I’m still not sure how water resistant it will be but we will see. It is replacing a folding cover and thus far it is easier to use. I’ll have to see if it is worth the space trade off but I didn’t like the rear window being blocked when the folding cover was open.
Piece of junk. It ripples in the wind like a tarp over the back of the pickup. The canister does not roll up without having to be forced it in, mostly due to the ripples from driving down the highway. 2 stars because it could work well, the parts and design, if the actual cover were designed for the use it is intended for.
etrailer had excellent communication and the cover came in sooner than expected. The Retrax cover was flawless and had excellent instructions for easy installation!
Excellent shipping. No damage. Installation instructions were easy to follow. No complex tools needed. Lightweight product. Easy lifting and maneuvering into position.
Everybody at etrailer have always provided excellent customer service. Thank You,
I spent more time getting the cover aligned than assembling and getting it onto the truck bed rails. The instructions are very good. I had to adjust the top jaws of the all the rail clamps since I have the T-slot XR rail system. I used a thin piece of cardstock to check for unwanted clearance between the jaw and truck bed flange. Since I didn't have a very large drill bit, I used a Dremel sanding bit to enlarge the pilot hole that I drilled through the plastic bed plug for the drain tube. That worked fine. The cover looks great and seems to operate well on this first day of installation and use. The T-slot rails do not get in the way of using the hand-holes for the rear step bumper.
So far I have about 10000 miles on this set up and the Retrax cover has been great, love being able to keep prying eyes off my gear and water infiltration has been minimal. This is the plastic version and seems to be holding up fine to the elements thus far…time will tell, there is a slight loss of cargo space with this unit installed but it hasn’t been an issue for me. I am very happy overall to this point.
Great accessory for our F-150. Installation isn't too bad if you just take it slow and double-check everything as you go. Looks are top-notch, and the functionality has been excellent. Gives us an extra sense of security being able to lock the cover when needed. You lose a small amount of bed space, but so far it hasn't caused any problems for us. Did I mention it looks great?
The install is complete. I'd prefer a hard copy of the directions. The little point and shoot QR code took me to the wrong cover. After a little work I did find the correct one. This added a good 30 minutes to the install time. Little trouble with the adjustment. I might have to adjust a little more in the days to come. I'm conservative with the 4 star rating. Time will tell, could move to 5. The MAJOR concern...the delivery company delivered it to the wrong address. Thankfully I have honest neighbors otherwise someone would have been out $[XX].
I'd have a conversation with the delivery company if I were y'all.
Works good overall. Opens, closes and locks very well. I get some water coming in on the sides , driving in the rain. Not pleased with the connections on the drain tubes. I have had to glue them in more than once, even during initial install. I did not like the fact that I had to drill those 1/2" holes in the bed for them as well.
Fantastic cover. Perfect for my needs. Performs better than I imagined it would. Ability to access bed instantly with supplies... Yakima rack on/off in literally less than two minutes. Drive a black limited Tacoma. Perfect match for this truck. From sleek to bound for the trails in no time.
The install was very easy but definitely a two man operation. The section that holds the rolled up cover is pretty large so you do lose some space. That section is also is fairly thin walled. I have dented and scratched it pretty good but it doesn't affect its function. I put one of those cargo load bars across the bed in front of it to try and stop that. I did have it "rack" a little after some rough drives which can cause it to bind a bit when rolling up. But it always closed on the second or third try. And its easy to straighten up again if needed. No water has gotten in the bed and it sure makes grocery getting a whole lot easier. I think its great.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Timothy P.
3/4/2024
One year in and I have no problems with this cover. Still opens and closes smoothly. It does take up more room than I was expecting but its not something that would keep me from buying it again. I have added the Yakima rack to it and it all works great.