Ladder Rack and Tonneau Cover Combo for a 2018 Toyota Tacoma with Deck Rails

Question

Question:

Do you have a tonneau cover that will work with the ladder racks?

asked by: Mike H

0

Expert Reply:

The only ladder rack and tonneau cover combo for a 2018 Toyota Tacoma is from Retrax and Yakima. I have attached these options for you below. However, the Thule TracRac TracONE Ladder Racks will simply not work with a tonneau cover because the mounts for the cover install inside the bed.

RetraxPRO XR Hard Tonneau Cover part # RTT-60851 (5 Foot Bed) (Lexan)
RetraxPRO XR Hard Tonneau Cover part # RTT-80851 (5 Foot Bed) (Aluminum)
or
RetraxPRO XR Hard Tonneau Cover part # RTT-60852 (6 Foot Bed) (Lexan)
RetraxPRO XR Hard Tonneau Cover part # RTT-80852 (6 Foot Bed) (Aluminum)
with
Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Retrax XR Tonneau Cover part # Y01151-5855

I know this may be more than you are looking to spend but it really is your only option for a ladder rack and tonneau cover combo.

expert reply by: Conner L

0

Answer 1

Thanks for reaching out Sean, The powered PowertraxPRO MX Hard Tonneau Cover #RT90842 can be opened manually if there's no power to automatically close. The cover has a manual override that allows you to retract it if the battery is dead or the…

view full answer...

Answer 2

Hello Joe, Thanks for writing in! Based on the measurements you provided, the Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 is not the right fit for your setup. Since your Tundra's receiver measures 18 inches from the ground and your TAB…

view full answer...

Answer 3

Hey Chris. The back-up camera wire is 66' long on the Rear View Safety Backup Camera System with Side Cameras and Quick Connect Kit item #RVS-770616-2133-NM. This is a great camera system that features a 7" LED color monitor and 2 side…

view full answer...

Answer 4

Hi Alex; the gauge on the Big Truck Big RV Tongue Weight Scale for Trailers #BTBRV004 has a +/- 5% full scale accuracy and displays weight in 20-lb increments up to 1,000 lbs. We also have it available with a SnapPad #BTBRV99FR. If you want something…

view full answer...

Answer 5

Hey Dan. If you positioned the hitch ball attachment towards the top of the Curt Rebellion XD Ball Mount item #C83WR you'd be level, assuming the 18" measurement you gave me is the height of your trailer's coupler. There is not a shorter…

view full answer...

Answer 6

Hey Pam, welcome back! To replace your Pentair Shurflo Revolution 4008 Series By-Pass Pump, I recommend the Seaflo Diaphragm Pump for Boats and RVs item #SE57FR. This is a 12v powered three gallon per minute pump that is rated up to 55 psi. It works…

view full answer...

Answer 7

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 8

If you use a weight distribution system that's rated too high for the tongue weight of the trailer you'll experience a very harsh ride quality. You really will want to go with a lower rated system. If you tell me what brand and model system…

view full answer...

Answer 9

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls #C83WR is 8" from the bottom of the receiver shank to the bottom of the adjustable mount.

view full answer...

Ladder Rack and Tonneau Cover Combo for a 2018 Toyota Tacoma with Deck Rails

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching