Heavy-duty trailer is perfect for hauling canoes, kayaks, and SUPs. 78" crossbars offer plenty of space to carry cargo boxes and other accessories. Retractable tongue offers compact storage. Aluminum diamond tread fenders create a stylish look.
Features:
Specs:
Coupler Specs:
Tire and Wheel Specs:
Note: Your local municipality requires you to register your trailer with the DMV. An etrailer representative will be reaching out to get information from you for the title.
This heavy-duty trailer with 78" crossbars has extensive space to mount accessories like watersport carriers, bike racks, a fishing rod carrier, or a cargo box (sold separately). With a 7-1/2' long tongue, this trailer offers exceptional clearance during tight turns. The extended tongue also makes it easier to back up the trailer and prevent binding than trailers with shorter tongues.
This MicroSportXT trailer has a retractable tongue and rubber bumpers, allowing you to store the trailer vertically.
To retract the tongue, remove the metal pin and clip holding the tongue in place and disconnect the wiring harness that runs through the tongue.
Then, push the tongue towards the back of the trailer until it is aligned with the bracket mounted on the rear cross member. Finally, slide the tongue on the bracket and place the pin and clip in the aligned holes to secure the tongue in place.
With a smaller footprint, you can stand the trailer upright, using the rubber bumpers attached to the rear cross member to support the trailer's weight.
The DOT-approved tail lights on this trailer are fully submersible, so you don't have to worry about damaging the lights when loading and unloading your boat in water. Each tail light has brake, running light, and turn signal functions, as well as side marker lights and reflectors. In addition, these LED lights last longer, burn brighter, and require less power than incandescent bulbs.
The wiring for this trailer has a simple plug-and-play design, so it doesn't require any cutting or splicing to install. As you assemble the trailer, route the main wiring harness through the trailer tongue and down towards the body of the trailer. Then plug the 4-wire end of the tail light harness into the main harness.
Run the wires of the tail light harness along the sides of the trailer frame and plug the individual wires into the matching wires on the side marker lights and the tail lights. The wires are color-coded so that you can easily match them up - no circuit tester is required. Once all of the wires are plugged in, use the included clips to secure the harness to the frame.
When you're ready to connect the trailer to your vehicle, simply plug the trailer end of the main harness into the 4-way flat connector on your vehicle.
This trailer includes a leaf spring suspension system to limit road shock while you tow. A sturdy steel axle runs beneath the trailer frame. The 2 slipper springs that support the axle flex to absorb the rough motion that can occur when driving over bumpy terrain. Also, the axle, spring hangers, and tie plate are galvanized to resist rust and corrosion.
Hooking this trailer to your vehicle is quick and easy. The trailer's coupler connects to a 2" hitch ball, and the included safety chains act as an emergency measure if the coupler accidentally disconnects from your hitch ball. A rubber coated lift handle is mounted to the coupler to provide a solid grip for lifting or maneuvering the trailer. Finally, the skid plate on the underside of the trailer tongue keeps the coupler from touching the ground.
California residents: click here
Professional and prompt service.
am thrilled
it works just as it should
Easy to assemble with minimal tools. Grandkids Ivan and Jeanette did the work, grandpa checked mechanical integrity. Ready to go and play by the afternoon.
grate hauler easy loading and unloading works well
Works great for transporting my Eddy Line Whisper sea kayak.
Excellent is an understatement. Very easy to order on line. All questions answered without hesitation. Product shipped and was received in a timely fashion. Great company
Very nice trailer. Took 2 days to put together but it all went well.
Excellent trailer. Highly recommended!
Great trailer to hold my large fishing kayaks. I am glad I went with this solution as I can permanently store my kayaks on the trailer under my lean to. The trailer took a while to build admittedly and I did have to run to the hardware store to grab a nut I was shorted and replace a metric carriage bolt with thread damage, but overall it is a solid product that drives well and I highly recommend.
A couple notes: The lighting kit is a 4 pin, so you may need to get an adapter if you have an older vehicle (mine had a 7 pin circle style plug only). Also, there is no space tire holder on the trailer like you see in the pictures so you will either have to throw it in your vehicle or acquire parts to attach it to the trailer.
Only problem is various boxes arrived over a 3 day period, assembly 3+ hours, but all parts present, trailer works well
What a great product and they have the best customer service EVER!!!!
Great trailer easy to put together. Hardest part is getting the title and bill of sale . Seems to me that would come with trailer. I have been waiting two weeks on my title so I can use it and I’m still waiting.
Do you have a question about this Kayak Trailer?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.