Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
For anyone who spends time around water or deals with humidity, corrosion can ruin a good wheel fast. This 13" x 4-1/2" steel wheel uses a hot-dip galvanized finish that provides superior protection from rust and corrosion. It’s a sturdy, long-lasting design that meets Department of Transportation standards, so it holds up season after season without flaking or peeling like painted finishes often do.
When you’re hauling gear, you want a wheel that can handle the weight with no surprises. This rim is rated at 1,660 lbs and built with durable steel that meets DOT specifications. The 0 offset provides balanced tracking and weight distribution for steady performance under load.
Fitment is straightforward thanks to the common 5 on 4-1/2" bolt pattern and 3.19" pilot diameter. The wheel bolt size is 1/2"-20 with a zero offset, so it lines up easily with standard trailer hubs. The eight-spoke pattern not only gives it a classic look but also adds even load distribution across the rim.
This rim’s 13" diameter and 4-1/2" width make it a match for popular trailer tire sizes like ST175/80-13, ST185/80-13, and ST185/60R13. That means you can pair it confidently with the tires you already rely on, knowing the combination will mount cleanly and maintain proper load support on the road.

1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today I'm gonna take a look at this Americana 13 inch by 4 1/2 inch galvanized spoke design steel trailer wheel with the 5 on 4 1/2 inch bolt pattern. Now, this tire wheel assembly, it is designed for your use in marine applications like on your boat trailer. The wheel is a sturdy steel construction with the multi-spoke design to it. It does have a galvanized finish on the wheel, which will protect the wheel from rust and corrosion when you're unloading your boat in the water.
Now, the galvanized finish is not always the best-looking finish on the wheel, but it is the best finish for protection. The wheel is a high-quality wheel, doesn't meet the DOT, Department of Transportation, specifications. If you notice, this wheel does not include a center cap. We do sell center caps. If you do want one, we do sell 'em separately.
You do wanna make sure to get a center cap. It has the same diameter as this pilot hole 'cause your center cap will be installed through this hole. The diameter on this pilot hole is 3.19 inches. Few measurements on the wheel we're gonna measure is the diameter and the width. And when you measure the diameter, you're gonna measure inside to inside.
And the reason is, when you mount a tire on here, the tire beads will seat right here. So basically, what you're measuring is from bead seat to bead seat. So if we take our tape measure and if we go inside to inside, there's your 13 inch diameter. The width will be the same way. You're measuring bead seat to bead seat, so inside to inside.
4 1/2 inches for the width. Now, the bolt pattern on this wheel is a 5 on 4 1/2 inch bolt pattern. And if you wanna measure that on a wheel like this that's an odd number of lugs, in this case, 5, what you'll need to do is pick any one of the holes, let's say this one. And then you're gonna measure across to either one of these holes. But when you measure, it's from the center of the starting hole to the furthest edge of the hole you measure to. So on this one, it'll measure 4 1/2 inches. So it's gonna tell you it's a 5 lug, 4 1/2 inch bolt pattern. This does use a wheel lug size of a 1/2 inch by 20. The weight capacity on this wheel is 1,660 pounds. Now, always remember that if you have any questions regarding this product, please don't hesitate to contact us via phone, chat or email. Or if you've even purchased this product, please send us pictures of it being used in your application. But that's gonna do it for a look at this Americana 13 inch by 4 1/2 inch galvanized spoke design steel trailer wheel with a 5 on 4 1/2 inch bolt pattern.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews

Gwendolyn Y.
4/17/2025
Sounds like this wheel will withstand the test of time, even with a hint of salt.

Gwendolyn Y.
11/11/2024
Hey Louis. These wheels are dipped galvanized. The dipping process can cause runs, inconsistencies, and sometimes cause areas to look like clumping. I am more than happy to send out a replacement for the chipped one, let me know and I can take care of that for you.

Wilhelmus
4/20/2025
They have been great, looking forward to many years of use.
Do you have a question about this Trailer Tires and Wheel?
Condition: Badly Dinged
Notes: The wheel is bent in a couple of places. Otherwise, new and unused.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.









Mark
6/23/2026
As good as expected, they kept the finish well over the winter.