Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re hauling serious weight, you want a wheel that’s up to the task. This 10" x 6" steel wheel is rated for 1,800 lbs and meets DOT specifications for reliable performance under load. With its solid-center design and 0 offset, it keeps your trailer tracking straight and steady mile after mile.
Road grime, rain, and salt can quickly ruin a standard finish, but not this one. Americana’s white powder coat is applied over an e-coat primer to seal the steel from moisture and resist rust. It keeps the wheel looking clean while protecting it from corrosion season after season.
Finding the right bolt pattern can be tricky, but this wheel takes out the guesswork. It features a 5 on 5-1/2" pattern with a 4" pilot diameter and uses standard 1/2"-20 wheel bolts. It’s a direct replacement option when you need a sturdy steel rim that installs without hassle.
If you’ve upgraded from older tire sizes like 20.5x8-10, this wheel is ready for the modern equivalent. It pairs perfectly with 205/65-10 tubeless trailer tires, giving you solid compatibility with today’s most common small-trailer tire sizes.
Every detail matters for long-term reliability. The valve stem hole is .453" in diameter, ready to accept high PSI rated valve stems like part # AM20906. That means secure air retention and dependable inflation over time without modification or guesswork.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we'll take a look at this Americana 10 inch by six inch white solid center steel trailer wheel with the five on five-and-a-half inch bolt pattern. Now this wheel's a sturdy steel construction. As we mentioned, it's a solid center design, and they use a nice white powder coat finish over an eco primer. Helps reduce rust and corrosion. Now this wheel is a direct replacement for the wheels that are on the tracker of pontoon boat trailers.
This is a high quality wheel, meets the DOT, Department of Transportation specification. If you notice, it does not come with a center cap. A few specs on this, we're gonna measure the diameter of the wheel and the width, and when you measure the diameter on the wheel, you're gonna be measuring inside to inside. Basically when the tire's put on here, the tire bead is what'll seat right here. So you're measuring from the bead seat to the bead seat inside to inside.
So you can see if I put a tape measure on there, there's your 10 inch for the diameter. The width on it, you'll measure same way, it's bead seat to bead seat, inside to inside. There's your six inch width. Now the bolt pattern we mentioned on this is a five on five-and-a-half inch. And if you wanna measure that on a wheel, that's an odd number of lugs, like in this case, five, all you have to do is pick one of the holes, let's say this one, and then you're gonna measure across to either one of these.
But when you measure, it's from the center of the starting hole to the furthest edge of the hole that you measure to. So on this one, it'll measure five-and-a-half inches. So that means it's a five lug, five-and-a-half inch bolt pattern. Pilot hole diameter right here is four inches. It does use a wheel lug size of a half-inch by 20.
And the last thing, it does have a weight capacity of 1,800 pounds. But that should do it for a look at the Americana 10 inch by six inch white solid center steel trailer wheel with a five on five-and-a-half inch bolt pattern.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Ds
12/30/2021
No problems
Don
3/20/2022
No problems….works as expected.
Leon
3/20/2021
After a year, it is still in perfect condition. Great price and fit!
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Danielle R.
7/22/2018
Works great. Now is on trailer, on spare tire holder.